Kicker Pontoon - Tritoon Boat Audio Upgrade, (4) 6.5" Marine Speakers, 10" Subwoofer tube & KXMA 5Ch. Marine Amplifier Bundle

Included in this kit

---

This bundle includes a Kicker 46CWTB102 TB10 10-inch Loaded Weather-Proof Subwoofer Enclosure w/Passive Radiator - 2-Ohm, 400 Watt, 2x Kicker KM65 6.5-Inch (165mm) Marine Coaxial Speakers with 3/4-Inch Tweeters, 4-Ohm, Charcoal and White Grilles, and a Kicker 48KXMA9005 KXMA900.5 4x125w 4-Ch Full-Range Class-D Marine Amplifier w/400w Class-D Sub Ch.

1x Kicker 46CWTB102 TB10 10-inch Loaded Weather-Proof Subwoofer Enclosure w/Passive Radiator - 2-Ohm, 400 Watt - (46CWTB102)

Kicker 46CWTB102 10-Inch 2-Ohm Loaded Weather Proof CompR Subwoofer Tube

A modern take on an old-school classic, the TB features thick ABS construction, and comes equipped with both an active CompR woofer on one end, and a Reflex Sub on the other. You get louder, deeper bass that you can mount almost anywhere.
An innovative bracket system allows the TB to be mounted with ease: horizontally or vertically.
RE-FLEX Passive Radiator - Made with the same surround and cone materials as the active sub, the Reflex Subwoofer is mounted on the opposite side of the TB - creating even deeper, louder bass.
WEATHER-PROOF - The all-weather TB loves to play outdoors. Hook it up on your boat, UTV or Jeep for fun on the trail, in the water or at the dunes. It keeps pounding as hard as you want - wherever you want.
Ultra-deep and surprisingly loud, the TB subs mount in your trunk or your truck with equal ease. You get the bump you want without losing the space you need.

Features:
• Two Ohm Speaker
• Thick ABS Tube Construction
• Flexible Horizontal or Vertical Mounting System
• Spring-Loaded Speaker Terminals
• CompR Woofer and Reflex Sub
• Ceramic Magnet
• Advanced Heat Management System
• Signature Double Red Stitching
• Grilles included
• This TB 10-Inch Tube Speaker works best with 400 watts of recommended power.

Specifications:
• Type - Reflex
• Size (in., cm) - 10, 25
• Impedance (ohms) - 2
• Power Watts (peak/RMS) - 800/400
• Sensitivity (dB 1w/1m) - 85.7
• Box Top Depth (in, cm) - -
• Box Bottom Depth (in, cm) - 16-9/16, 42.1
• Box Height (in, cm) - Vert. Mount: 17-1/16, 43.4; Horiz. Mount: 10-3/4, 27.3
• Box Width (in, cm) - 10-5/8, 27

2x Kicker KM65 6.5-Inch (165mm) Marine Coaxial Speakers with 3/4-Inch Tweeters, 4-Ohm, Charcoal and White Grilles - (45KM654)

They’re loud. They’re clear. They’re nearly indestructible! The KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!

UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.

Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.

Four-Ohm Voice Coil
3/4-Inch Titanium Tweeter
UV-Treated Polypropylene Woofer With Santoprene® Surround
UV-Resistant Polymer Basket
Locking/Sealed Terminal Cover
Sealed Motor Structure
316L Stainless Mounting Hardware Included
Charcoal and White Grilles Included
Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure

Specifications
Woofer(in,mm)
6-1/2, 165
Tweeter(in,mm)
3/4, 20
Tweeter Dome Material
Titanium
Rated Impedance(Ω)
4
Peak Power Handling(Watts)
195
Continuous Power Handling(Watts RMS)
65
Sensitivity(1W,1m)
90
Frequency Response(Hz)
35-21k
Mounting Hole Diameter(in,mm)
5-1/8, 130
Mounting Depth(in,mm)
2-7/8, 72
Grilles
Charcoal and White

What's in the Box:
2 - 6.5" 4Ω Coaxials
8 - Mounting Screws
8 - Mounting Screw Clips
2 - Wire Connection Cover
2 Zip Ties
Due to continual development, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.

1x Kicker 48KXMA9005 KXMA900.5 4x125w 4-Ch Full-Range Class-D Marine Amplifier w/400w Class-D Sub Ch - (48KXMA9005)

Kicker KXMA900.5 4x125w 4-Ch Full-Range Class-D Marine Amplifier w/400w Class-D Sub Ch - 48KXMA9005

Kicker gives you a full suite of purpose-built KXMA-Series Marine Amplifiers, all built to deliver the volume and clarity you need on the water. Following Kicker Real Marine protocol, power terminals meet stringent ABYC/NMMA standards, while thick gasketing protects the control cover from unwanted moisture. Even the aluminum chassis is UV-treated for extra-long life. All Kicker marine amplifiers also utilize conformal-coated circuit boards to protect the heart of the amp from water damage. Get the absolute most out of your amp with a specially designed gain control that lights up when the perfect input signal is detected from your radio.

Features -
• 900.5 Adds Two Full-Range Zones Plus a Sub Section
• Conformal-Coated Circuit Boards to Repel Moisture
• 316L Stainless-Steel, No-Rust Hardware
• Small Footprint to Tuck Out of the Way
• 0-6dB Variable Bass Boost
• Marine-Compliant Terminals
• Built-In Variable Crossovers for Precise Speaker Performance Matching
• Designed to Add Extra Intensity to a Large System, or Power HighEnd Tower Speakers
• Marine Environment Ready
• Highly Efficient Class D Technology
• Superior Sound Quality and Added Power

Specifications -
• Power [watts/ch] 2 Ohm Stereo: 125x4
• Power [watts/ch] 4 Ohm Stereo: 75x4
• Power [watts/ch] 4 Ohm Bridged Mono: 200x4
• Power (watts/ch) 1 Ohm Mono: 400x1 +/- 10%
• Power (watts/ch) 2 Ohm Mono: 400x1
• Dynamic Power [watts] 1200
• Frequency Response [Hz]: 10-20k
• Crossover: OFF/HP/LP (amp 1), variable 10-5kHz w/ 10x switch; OFF/HP/LP/BP (amp 2), var. HP 10-500Hz, var. LP 40-5kHz w/ 10x switch; (sub section) LP only, var. 40-160Hz; var. subsonic 10-80Hz
• KickEQ+ Bass Boost: variable 0-6dB @ 40Hz [sub ch only]
• Dimensions: H – 2-1/8, 5.5; W – 8-5/16, 21; L - 14-3/4, 37.4