Description
Included in this kit
This bundle includes 2x Kicker 52CVT124 CVT12 CompVT 12-Inch (30cm) Subwoofer, 4 Ohm SVC, and 2x Kicker 52GR12 12 Inch Speaker Grille.
2x Kicker 52CVT124 CVT12 CompVT 12-Inch (30cm) Subwoofer, 4 Ohm SVC - (52CVT124)
The CompVT 12-Inch Subwoofer is available as a 4Ω slimline driver.
New and improved, precise KICKER engineering allows the CompVT to pound with limited space. A proprietary four-layer voice coil collaborating with SoloKon™ cone technology, provides the ability to work with serious amounts of power without the bulk of a standard subwoofer.
The CompVT Subwoofer works best with a sealed or ported enclosure for its substantial power handling.
Specifications
SIZE [in, cm]: 12, 30
IMPEDANCE [Ohms]: 4 SVC
Recommended Amplifier Power (watts RMS) 225-450
Peak Power (watts, per ANSI/CTA-2031-A) 900
SENSITIVITY [dB 1w/1m]: 87.1
MOUNTING DEPTH [in, cm]: 4-3/8, 11.1
MOUNTING DIAMETER [in, cm]: 11, 28.1
MIN SEALED BOX VOL [cu. ft, L]: 1, 27.9
MAX SEALED BOX VOL [cu. ft, L]: 4.6, 130
MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6
MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7
Thiele/Small Parameters
Re: 3.695 Ohm
Krm: 0.0024 Ohm
Erm: 0.965
Kxm: 0.02685 Ohm
Exm: 0.78
Cmes: 1103.91
Lces: 17.435
Res: 30.83 Ohm
fs: 36.35 Hz
Mms: 184.6795 g
Mmd (Sd): 170.8555 g
Rms: 5.427 kg/s
Cms: 0.104 mm/N
Kms: 9.63 N/mm
Bl: 12.934 Tm
Qtp: 0.9215 total Q-factor considering all losses
Qms: 7.7675 mechanical Q-factor of driver in free air considering Rms only
Qes: 0.93 electrical Q-factor of driver in free air considering Re only
Qts: 0.831 total Q-factor considering Re and Rms only
Vas: 41.59095 I
n0: 0.2055 reference efficiency (2 pi-radiation using Re)
Lm: 85.33 dB characteristic sound pressure level (SPL at 1m for 1W @ Re)
Lnom: 85.675 dB nominal sensitivity (SPL at 1m for 1W @ Zn)
Sd: 530.93 cm² diaphragm area
Xmax: 13 mm
2x Kicker 52GR12 12 Inch Speaker Grille - (52GR12)
Steel Mesh
Try this refined, clean look on all sizes of your square or round subs. Use them also with CompQ or SoloX L7X subwoofers, 3-D printing the necessary spacers using the provided template files.
(fits L7T, CompR, CompRT, CompVR, CompVT and CompC; also fits L7S, L7R, CompVX and Comp with some cosmetic concessions.)
Round Mesh
Protect your KICKER subs with tough steel mesh.