Description
Included in this kit
This bundle includes 2x Kicker 49L7X121 - SoloX L7X 12-Inch (30cm), 3" Coil, Ferrite Competition Subwoofer, 1-Ohm, 2x Kicker Warhorse WXA3600.1 Monoblock Subwoofer Amplifier | 3600 Watts x 1 at 1-Ohm - 49WXA36001, and a Kicker 49DUL7X12 Dual 12” SoloX L7X Unloaded Enclosure.
2x Kicker 49L7X121 - SoloX L7X 12-Inch (30cm), 3" Coil, Ferrite Competition Subwoofer, 1-Ohm - (49L7X121)
The KICKER SoloX L7X Ferrite Competition Subwoofer brings the most advanced bass technology and unprecedented performance, from the guys who invented it for a vehicle. A motor like no other – it includes a massive, triple-stacked ferrite magnet surrounding a hyper-extended pole piece, engineered for an enormous, more linear magnetic field and amazing heat dissipation. It's ultra-deep bass at very high volume. L7X's three-inch voice coil is supported by a dual-spider suspension system, and the double-pressed pulp cone is attached to an ultra-long-throw Santoprene surround - equipped with KICKER's square cone tech and ribbed corners for continuous force and air movement. Field-Replaceable Recone Kit - Using an exclusive, surround compression system, bolt-on spider landing, and helpful alignment shims, repairing an L7X is no sweat! Features: • Field-Replaceable Recone Kit – cone/voice coil/spider assembly, and no gluing required
• Forced Air Cooling™
• Three-inch, aluminum voice coil former
• Dual-spider suspension
• Double-pressed pulp cone
• Heavy-duty UV-resistant Santoprene surround
• Custom rubber magnet boot
• Cast-aluminum basket
• Single 8 AWG terminal and dual 8 AWG terminal block
• Triple-Stacked Ferrite Magnet
Specifications:
• Size (in, cm) - 12, 30
• Rated Impedance (Ohms) - 1 DVC
• Rec Amp Power rms - 1000-2000
• Frequency Response - 20-100
• Magnet Diameter (in, cm) - 8-11/16, 22
• Total Magnet Weight (oz, kg) - 406, 11.5
• Voice Coil Diameter (in, mm) - 3, 75
• Voice Coil Winding Width (in, mm) - 2.5, 62.5
• Top Plate Thickness (in, mm) - 0.5, 13
• Xmax (in, mm) - 1.25, 31.25
• Mounting Cutout (in, cm) - 11-1/16, 28.1
• Mounting Depth (in, cm) - 10-1/8, 25.7
• Recommended Vented Box Volume (Cu. Ft., L) - 3, 84.9
• Port Opening (in x in, cm x cm) - 3.5 x 13, 9 x 33
• Port Length (in, cm) - 36.5, 93
• Vented Enclosure Tuning Frequency (Hz) - 31
2x Kicker Warhorse WXA3600.1 Monoblock Subwoofer Amplifier | 3600 Watts x 1 at 1-Ohm - 49WXA36001 - (49WXA36001)
Kicker WXA3600.1 Warhorse Monoblock Subwoofer Amplifier
The Kicker WXA3600.1 Warhorse amplifier is engineered entirely in-house by KICKER Research and Development for ultra-high SPL applications. This amplifier features extreme reliability under intense bass power and overall use, making it the perfect choice for bass enthusiasts.
Key Features
- Extreme Reliability: Designed to handle intense bass power and overall use.
- Full-Bridge Class-D Design: Efficient and powerful performance.
- Quad Cooling Fans: Micro-controller-regulated fans for efficient cooling.
- Daisy-Chaining Capability: Allows remote power across multiple amps.
- Competition Mode: Fix crossover settings and gain-match multiple amps.
- Magnetic-Mount Remote: Includes a premium remote bass-level control.
- Diagnostic Tool: Heavy-duty magnetic-mount tool for real-time monitoring.
- Wide Compatibility: Works with most factory or aftermarket source units with FIT+™ differential inputs.
Specifications
| Model | WXA3600.1 |
|---|---|
| RMS Power (watts/ch) 1 Ohm Mono (@ 14.4v, <1%THD) | 3600x1 |
| RMS Power (watts/ch) 2 Ohm Mono (@ 14.4v, <1%THD) | 2500x1 |
| RMS Power (watts/ch) 4 Ohm Mono (@ 14.4v, <1%THD) | 1400x1 |
| Dynamic Power (watts) | 5000 |
| Frequency Response (Hz) | 10-200 |
| Signal-to-Noise Ratio (dB; A-weighted, re: rated power) | >90 |
| Signal-to-Noise Ratio (dB; ref: 1W output) | >70 |
| Input Sensitivity | Low level 125mV-5V, high level 1V-40V |
| Selectable Electronic Crossover | Variable Low-pass 50-200Hz, 24dB/octave |
| Subsonic Filter | Defeatable @ 15Hz, 24dB/octave |
| Dimensions (in, cm) | H – 2-9/16, 6.5, W – 9-1/8, 23.2, L – 15-3/8, 39.1 |
Extreme Engineering
Every aspect of the Warhorse amplifier has been rigorously tested in KICKER's labs to ensure extreme performance and reliability. Engineered completely in-house by KICKER Research and Development, it is designed for ultra-high SPL applications.
Fortified to Go Hard
From the board layout to the rails, to the Tiffany-style RCA connectors, everything about these amps will make a bass head smile from ear to ear. This full-bridge, one-ohm stable amplifier features dual 1/0 power and ground connections, 4 AWG speaker terminals, dual 8 AWG remote terminals, and quad microprocessor-controlled fans for efficient cooling.
Engage Competition Mode!
Set the input sensitivity to 4 volts in Competition Mode, locking the gain potentiometer for easy gain-matching across multiple amps. This mode offers several advanced features to enhance your audio experience.
Real-Time Status Tools
The included magnetic-mount diagnostic tool displays battery voltage, thermal protection status, power-supply protection, and speaker current overload in real time. A premium remote bass-level control with magnetic mount is also included, giving you complete control over your audio system.
Comprehensive Compatibility
Equipped with KICKER FIT+™ (Fail-safe Integration Technology) differential inputs and a wide RCA input range, the Warhorse amplifier is compatible with nearly all factory or aftermarket source units. It is also start/stop compliant.
Experience extreme power and reliability with the Kicker WXA3600.1 Warhorse amplifier, engineered for superior performance and ultimate audio satisfaction. Upgrade your audio system today and enjoy an unmatched listening experience with the Kicker WXA3600.1 Warhorse amplifier.
1x Kicker 49DUL7X12 Dual 12” SoloX L7X Unloaded Enclosure - (49DUL7X12)
Mobile/Subwoofers/Unloaded Subwoofer Boxes