Description
The JBL marine A600 mono subwoofer amplifier delivers 600-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your marine’s factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.
Features
Compact size High and low level input Variable crossover and bass boost Low noise and distortion Input Level Control Full on-board protection Phase Switch RBC wired remote Class D amp technology Turn-on mode
Specifications:
mono subwoofer marine amplifier 350 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms) Max Power 1200 watts Class D amp technology variable low-pass filter (32-320 Hz, 12 dB/octave) variable bass boost (0-12 dB at 45Hz) phase switch (0, 180 degrees) preamp and speaker-level inputs fuse rating: 30A x 2 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier WxHxD=220mm x 51.3mm x 180mm / 8-11/16” x 2-1/16” x7-1/8”
What’s in the box
One marine A600 mono subwoofer marine amplifier Four 30A ATO fuses (2 installed, 2 spare) 2 Bare wire-to-RCA adapters Remote bass control module 16.5’ Remote control cable (RJ-25 plugs on both ends) 2 Self-tapping screws for remote (M3 x 15mm) 4 Mounting screws (M4 x 53mm) Owner’s Manual Two JBL stickers 1 logo badge
Features
Compact size High and low level input Variable crossover and bass boost Low noise and distortion Input Level Control Full on-board protection Phase Switch RBC wired remote Class D amp technology Turn-on mode
Specifications:
mono subwoofer marine amplifier 350 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms) Max Power 1200 watts Class D amp technology variable low-pass filter (32-320 Hz, 12 dB/octave) variable bass boost (0-12 dB at 45Hz) phase switch (0, 180 degrees) preamp and speaker-level inputs fuse rating: 30A x 2 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier WxHxD=220mm x 51.3mm x 180mm / 8-11/16” x 2-1/16” x7-1/8”
What’s in the box
One marine A600 mono subwoofer marine amplifier Four 30A ATO fuses (2 installed, 2 spare) 2 Bare wire-to-RCA adapters Remote bass control module 16.5’ Remote control cable (RJ-25 plugs on both ends) 2 Self-tapping screws for remote (M3 x 15mm) 4 Mounting screws (M4 x 53mm) Owner’s Manual Two JBL stickers 1 logo badge