Description
Included in this kit
This bundle includes a MTX Audio JH7005 Jackhammer Series 90W x 4 & 450W x 1 @ 2-Ohm Full Range Class D 5-Channel Amplifier, a MTX Audio TERMINATOR6 Terminator Series 6.5", 2-Way, 45W RMS 4-Ohm Coaxial Speaker Pair, and a MTX Audio TERMINATOR69 Terminator Series 6x9", 2-Way, 60W RMS 4-Ohm Coaxial Speaker Pair.
1x MTX Audio JH7005 Jackhammer Series 90W x 4 & 450W x 1 @ 2-Ohm Full Range Class D 5-Channel Amplifier - (JH7005)
MTX JH7005
Jackhammer Series 700 Watt Five Channel Full System Amplifier
Easy Access Controls
The JH7005 is fully loaded and ready to drive an entire system. The top panel includes controls for both full range speakers, gain, crossover and frequency adjustment, as well as controls for the subwoofer output including fully adjustable gain, low pass filter, subsonic filter and bass boost.
Only What You Need
The JH7005 has the functionality to power a complete system including full range speakers and subwoofer(s). The input section features high quality RCAs (front, rear, sub) for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don't have RCA outputs. The unit can also be used in either 5-channel, 4-channel or 2-channel modes depending on the Input Mode selection.
High Quality Power and Speaker Connections
The JH7005 can accept up to a standard 1/0-gauge power and ground wire for optimal performance. The speaker terminals can accept up to 12-gauge speaker. Both sets of connectors use set screw style fittings that ensure proper connection and continual signal transfer.
FEATURES ā¢ All-In-One System Design
ā¢ Top Mount Controls
ā¢ Variable Crossovers
ā¢ Selectable Turn On Input
ā¢ Selectable Input Signal
ā¢ Variable Subsonic Filter
ā¢ Remote Bass Knob
SPECIFICATIONS ā¢ Description: 5-Channel
ā¢ Topology: Class AB + D
ā¢ 4Ī© RMS Power Output: 60W X 4 Channel, 275W x 1 Channel
ā¢ 4Ī© Bridged: 180W x 2 Channel
ā¢ 2Ī© RMS Power Output: 90W x 4 Channel, 450W x 1 Channel
ā¢ THD: Less Than 1%
ā¢ Signal to Noise Ratio: 60dB
ā¢ Frequency Response: 20Hz to 20kHz (4 channels), 20Hz - 250Hz (subwoofer)
ā¢ Crossover: 40Hz to 250Hz, 12dB/Oct
ā¢ High Pass Filter: 40Hz to 250Hz, 12dB/Oct
ā¢ Subsonic Filter: 20Hz to 50Hz, 12dB/Oct
ā¢ Bass Boost: 0 - 12dB @ 45Hz
ā¢ Maximum Input Signal: 10V
ā¢ Height: 2.57" (65.2mm)
ā¢ Width: 7.61" (193.4mm)
ā¢ Depth: 15.47" (393mm)
1x MTX Audio TERMINATOR6 Terminator Series 6.5", 2-Way, 45W RMS 4-Ohm Coaxial Speaker Pair - (TERMINATOR6)
MTX TERMINATOR6
6.5" 2-Way 45-Watt RMS 4Ī© Coaxial Speaker Pair
Upgrading your factory speakers is one of the easiest ways to get better sound in your car. Aftermarket speakers are able to handle more power and use better materials to deliver a better listening experience. The TERMINATOR Series speakers are designed to improve factory sound and work even better with an aftermarket radio and external amplifier.
The TERMINATOR6 is a 6.5" coaxial speaker that is capable of handling up to 45W RMS power and has a 4Ī© impedance. The unit includes a durable steel basket, polypropylene cone, and silk dome tweeter.
Point Source Technology
The TERMINATOR5 utilizes a point source tweeter design that recesses the tweeter flush with the woofer cone. This design increases sonic accuracy as the sound waves from the tweeter and woofer do not intermix causing distortion. The point source tweeter also enables the speaker to have a shallower mounting depth making it usable in more applications.
Aggressive Style
The TERMINATOR6 features a red cone that looks great in any interior. The removable grille incorporates a trim ring that makes all mounting screw heads invisible once installed.
Terminating Bad Sound
Whether you are upgrading blown factory speakers, using them with source-unit amplification, or even putting them on a small aftermarket amplifier, the TERMINATOR series speakers are going to bring your music to life. The latest generation TERMINATOR speakers deliver exceptional sound quality at an unbeatable price.
SPECIFICATIONS:
ā¢ RMS Power (Watts): 45
ā¢ Impedance: 4Ī©
ā¢ Sensitivity: 86.8dB (2.83V/1m)
ā¢ Frequency Response: 62Hz - 20kHz
ā¢ Cone Material: Polypropylene
ā¢ Grille Included: Yes
ā¢ Woofer Mounting Depth: 1.63" (4.15 cm)
ā¢ Crossover: NA
1x MTX Audio TERMINATOR69 Terminator Series 6x9", 2-Way, 60W RMS 4-Ohm Coaxial Speaker Pair - (TERMINATOR69)
MTX TERMINATOR69
6" x 9" 2-Way 60-Watt RMS 4Ī© Coaxial Speaker Pair
Upgrading your factory speakers is one of the easiest ways to get better sound in your car. Aftermarket speakers are able to handle more power and use better materials to deliver a better listening experience. The TERMINATOR Series speakers are designed to improve factory sound and work even better with an aftermarket radio and external amplifier.
The TERMINATOR69 is a 6" x 9" coaxial speaker that is capable of handling up to 60W RMS power and has a 4Ī© impedance. The unit includes a durable steel basket, polypropylene cone, and mylar dome tweeter.
Point Source Technology
The TERMINATOR69 utilizes a point source tweeter design that recesses the tweeter flush with the woofer cone. This design increases sonic accuracy as the sound waves from the tweeter and woofer do not intermix causing distortion. The point source tweeter also enables the speaker to have a shallower mounting depth making it usable in more applications.
Aggressive Style
The TERMINATOR69 features a red cone that looks great in any interior. The removable grille incorporates a trim ring that makes all mounting screw heads invisible once installed.
Terminating Bad Sound
Whether you are upgrading blown factory speakers, using them with source-unit amplification, or even putting them on a small aftermarket amplifier, the TERMINATOR series speakers are going to bring your music to life. The latest generation TERMINATOR speakers deliver exceptional sound quality at an unbeatable price.
SPECIFICATIONS:
ā¢ RMS Power (Watts): 60
ā¢ Sensitivity: 87.8dB (2.83V/1m)
ā¢ Frequency Response: 51Hz-20kHz
ā¢ Cone Material: Polypropylene
ā¢ Impedance: 4Ī©
ā¢ Grille Included: Yes
ā¢ Woofer Mounting Depth: 2.76" (7.0 cm)
ā¢ Crossover: NA