Description
The P2 PUNCH speakers are flexible upgrades for OEM systems with optional tweeters or for custom upgrades. Use the P2V2-TS as a fast drop-in or a 2-way component on vehicles equipped with a separate tweeter/midrange – like those found in an A-pillar or dash – for enhanced staging and imaging.
Kit Includes:
• (2) 3/4" Tweeters
• (2) Flush Mount Cups
• (2) Surface Mount Cups
• (2) Crossovers
Speaker Type: Convertible
Tweeter Size (Nominal Diameter): 3/4" (19mm)
Nominal Impedance (Ohms): 4Ω
Frequency Response (Hz): 3.5 - 25kHz
Voice Coil Diameter (in/mm): 0.75" (19 mm)
CrossoverTweeter High-Pass: 9kHz @ 12dB/octave
Tweeter Attenuation: 0dB or -3dB
Power Handling (Watts RMS): 75 Watts RMS / 150 Watts Peak
Fs (Hz): 3.5 kHz
Sensitivity (dB @ 1W/1M): 90 dB
Sensitivity (2.83V/1M): 93 dB
Mounting DiameterFlush Mount: 1.54" (39 mm) Surface Mount: 1.22" (31.1 mm)
Mounting Depth (Standard Flange): Flush Mount: 0.78" (19.9 mm) Surface Mount: 0.57" (14.4 mm)
Front Side Clearance: Flush: 0.44" (11.2 mm) Surface: 0.49" (12.4 mm)
Removable Motor Cover: No
Grille/Trim Ring Included: Yes
Included in the Box(2) 3/4" 4Ω Tweeters
(2) Flush-Mount Tweeter Cups
(2) Surface-Mounting Tweeter Cups
(1) Tweeter Removal Tool
(2) Passive Crossover Network (Tweeter)
(4) Self-Tapping Phillips #4x16mm (Tweeter)
(4) Self-Tapping Phillips #8x20mm (Crossover)
(2) 18” Crossover Wiring Extensions
(4) 18 AWG Crimp Butt Connectors
(4) Zip Ties 4.8 mm x 350 mm
Mounting Hardware: No
Kit Includes:
• (2) 3/4" Tweeters
• (2) Flush Mount Cups
• (2) Surface Mount Cups
• (2) Crossovers
Speaker Type: Convertible
Tweeter Size (Nominal Diameter): 3/4" (19mm)
Nominal Impedance (Ohms): 4Ω
Frequency Response (Hz): 3.5 - 25kHz
Voice Coil Diameter (in/mm): 0.75" (19 mm)
CrossoverTweeter High-Pass: 9kHz @ 12dB/octave
Tweeter Attenuation: 0dB or -3dB
Power Handling (Watts RMS): 75 Watts RMS / 150 Watts Peak
Fs (Hz): 3.5 kHz
Sensitivity (dB @ 1W/1M): 90 dB
Sensitivity (2.83V/1M): 93 dB
Mounting DiameterFlush Mount: 1.54" (39 mm) Surface Mount: 1.22" (31.1 mm)
Mounting Depth (Standard Flange): Flush Mount: 0.78" (19.9 mm) Surface Mount: 0.57" (14.4 mm)
Front Side Clearance: Flush: 0.44" (11.2 mm) Surface: 0.49" (12.4 mm)
Removable Motor Cover: No
Grille/Trim Ring Included: Yes
Included in the Box(2) 3/4" 4Ω Tweeters
(2) Flush-Mount Tweeter Cups
(2) Surface-Mounting Tweeter Cups
(1) Tweeter Removal Tool
(2) Passive Crossover Network (Tweeter)
(4) Self-Tapping Phillips #4x16mm (Tweeter)
(4) Self-Tapping Phillips #8x20mm (Crossover)
(2) 18” Crossover Wiring Extensions
(4) 18 AWG Crimp Butt Connectors
(4) Zip Ties 4.8 mm x 350 mm
Mounting Hardware: No