Description
The P3 speakers are 3-way component systems for vehicles equipped with a separate tweeter, midrange, and woofer.
Kit Includes:
• (2) 6"x9" Speakers
• (2) 3.5" Coax Speakers
• (6) Crossovers
• (2) OEM Adaptors
• Installation Hardware
Speaker Type: Component System
Midrange Size (Nominal Diameter): 6"x9" + 3.5"
Tweeter Size (Nominal Diameter): 3/4" (19mm)
Nominal Impedance (Ohms): 4Ω
Frequency Response (Hz): 49Hz - 25kHz
Voice Coil Diameter (in/mm): 1.25" (32.5 mm)
Crossover
TWEETER: HP 9kHz @ 6dB/octave (internal)
MIDRANGE BASS BLOCKER: HP 1,200Hz @ 6 dB/Octave (33µF)
WOOFER: LP 1.2kHz @ 6dB/octave (external)
Sensitivity (dB @ 1W/1M): 89 dB
Sensitivity (2.83V/1M): 92 dB
Fs (Hz): 65 Hz
Power Handling (Watts RMS): 75 Watts RMS / 150 Watts Peak
Woofer Cutout Diameter: 8.41" x 5.71" (213.5 mm x 145 mm)
Woofer Mounting Depth (Standard Flange): 3.13" (79.4 mm)
Woofer Mounting Depth (No Motor Cover): 2.76" (70 mm)
Rear-Loading Depth (Twist-Lock Adaptor): 1.48" (37.7 mm)
Front-Loading Depth (Twist-Lock Adaptor): 1.70" (43.3 mm)
Woofer Front Side Clearance: 0.42" (10.6 mm)
Removable Motor Cover: Yes
Grille/Trim Ring Included: No
Included in the Box
(2) 6”x9” 4Ω Speakers
(2) 3.5” 4Ω Coaxial Speakers
(1) 3.5” Speaker Cutout Template
(1) 6x9” Speaker Cutout Template
(2) 3.5” 2-Tab Twist-Lock Adaptors
(2) 3.5” 3-Tab Twist-Lock Adaptors
(2) 3.5” 2-Tab Wide Twist-Lock Adaptors
(2) 3.5” 3-Tab Wide Twist-Lock Adaptors
(2) 33µF Non-Polarized Cap (Bass-Blockers)
(2) Passive Crossover Network (Woofer)
(4) Self-Tapping Phillips #4x16mm (Tweeter)
(4) 18” Crossover Wiring Extensions
(14) Self-Tapping Phillips #8x32mm (Speaker)
(2) Zip Ties 4.8 mm x 350 mm
(4) 18 AWG Red/Black Speaker Wire, 205 mm
(3) 18 AWG (–) Female Crimp Spade Conn. (.187”)
(3) 18 AWG (+) Female Crimp Spade Conn. (.250”)
(10) 18 AWG Crimp Butt Conn.
Mounting Hardware: Yes
Kit Includes:
• (2) 6"x9" Speakers
• (2) 3.5" Coax Speakers
• (6) Crossovers
• (2) OEM Adaptors
• Installation Hardware
Speaker Type: Component System
Midrange Size (Nominal Diameter): 6"x9" + 3.5"
Tweeter Size (Nominal Diameter): 3/4" (19mm)
Nominal Impedance (Ohms): 4Ω
Frequency Response (Hz): 49Hz - 25kHz
Voice Coil Diameter (in/mm): 1.25" (32.5 mm)
Crossover
TWEETER: HP 9kHz @ 6dB/octave (internal)
MIDRANGE BASS BLOCKER: HP 1,200Hz @ 6 dB/Octave (33µF)
WOOFER: LP 1.2kHz @ 6dB/octave (external)
Sensitivity (dB @ 1W/1M): 89 dB
Sensitivity (2.83V/1M): 92 dB
Fs (Hz): 65 Hz
Power Handling (Watts RMS): 75 Watts RMS / 150 Watts Peak
Woofer Cutout Diameter: 8.41" x 5.71" (213.5 mm x 145 mm)
Woofer Mounting Depth (Standard Flange): 3.13" (79.4 mm)
Woofer Mounting Depth (No Motor Cover): 2.76" (70 mm)
Rear-Loading Depth (Twist-Lock Adaptor): 1.48" (37.7 mm)
Front-Loading Depth (Twist-Lock Adaptor): 1.70" (43.3 mm)
Woofer Front Side Clearance: 0.42" (10.6 mm)
Removable Motor Cover: Yes
Grille/Trim Ring Included: No
Included in the Box
(2) 6”x9” 4Ω Speakers
(2) 3.5” 4Ω Coaxial Speakers
(1) 3.5” Speaker Cutout Template
(1) 6x9” Speaker Cutout Template
(2) 3.5” 2-Tab Twist-Lock Adaptors
(2) 3.5” 3-Tab Twist-Lock Adaptors
(2) 3.5” 2-Tab Wide Twist-Lock Adaptors
(2) 3.5” 3-Tab Wide Twist-Lock Adaptors
(2) 33µF Non-Polarized Cap (Bass-Blockers)
(2) Passive Crossover Network (Woofer)
(4) Self-Tapping Phillips #4x16mm (Tweeter)
(4) 18” Crossover Wiring Extensions
(14) Self-Tapping Phillips #8x32mm (Speaker)
(2) Zip Ties 4.8 mm x 350 mm
(4) 18 AWG Red/Black Speaker Wire, 205 mm
(3) 18 AWG (–) Female Crimp Spade Conn. (.187”)
(3) 18 AWG (+) Female Crimp Spade Conn. (.250”)
(10) 18 AWG Crimp Butt Conn.
Mounting Hardware: Yes