Description
Included in this kit
This bundle includes a PowerBass 3XL-810D - 8" Dual 1-Ohm VC 500Wrms / 750Wmax, and a PowerBass XMA-800D - 800 Watt x 1 @ 1-Ohm Class-D Amplifier.
1x PowerBass 3XL-810D - 8" Dual 1-Ohm VC 500Wrms / 750Wmax - (3XL-810D)
PowerBass 3XL-810D 8" Subwoofer
The 3XL 8" Subwoofers all feature 2.5” HD BASV voice coil formers high temperature voice coil winding to help dissipate heat. To allow full movement of the cone, we utilize an ultra high roll foam surround that increases the cone area for higher output along with linear cone stability throughout the subwoofers peak excursion.
The 3XL series have been designed to withstand the extreme heat that the new generation Class “D” amplifiers create. Class “D” amplifiers heat up the woofers voice coil two to three times hotter and faster than a conventional class A/B amplifier. This calls for Xtreme measures and special parts to classify these as a true “Class D Subwoofer”. But hey, this is PowerBass. They have it under control.
Features -
• 8" Dual 1-Ohm Subwoofer
• 500 watt RMS/750 Watts Max
• DDC Pressed Paper Cone
• High Roll Foam Surround
• 2.5” Vented HD BASV Voice Coil Former
• Perimeter Aero-Vent Voice Coil Cooling Vents
• Non Resonance DDC Coated Cast Aluminum Basket
• XTRA XTRA Large Double Stacked Motor Structure
• Square Spring Loaded Nickel Plated Push Terminals
• Designed for Sealed & Ported Enclosures
Specifications -
• Nominal Impedance: Dual 1-ohm
• Subwoofer Frequency Range: 35 Hz - 450 Hz
• Depth: 6.2"
• Voice Coil Size: 2.5 in
• Material: Pressed and Coated Pulp Paper
• Sensitivity (1W / 1M): 89 dB
• Spl: 89 dB
• Test Impedance: 1.83-ohms
• VC Impedance: 1-ohm + 1-ohm
• Size: 8 in
• Sensitivity: 89 dB
• Frequency Response: 35 Hz - 450 Hz
• Voice Coil Size: 2.5 in
• Power Handling (RMS/Peak): 500 / 750 watts
1x PowerBass XMA-800D - 800 Watt x 1 @ 1-Ohm Class-D Amplifier - (XMA-800D)
PowerBass XMA-800D 800 Watt Mono Block Compact Amplifier
The XMA amplifiers carry on the tradition of looking good and sounding great while taking up less space than any other amplifier we have ever offered – and smaller than most amps available from the majority of our competitors’ at the same output levels. High efficiency FRD (Full Range Digital) technology allows these amplifiers to operate at well over 85% efficiency.
Limited space no longer means sacrificing great sound with the new PowerBass XMA Amplifiers.
Features -
• 1,600 Watt High Efficiency Full-Range Class D Design
• 2-OHM Stable Five Channel Amplifier
• Ultra Low Current Draw
• Double Sided Copper Plated PCB
• PWM MOSFET Power Supply
• Digital Sound Optimization Circuitry
• High Damping Control Circuit
• Variable Subsonic Filter
• High Current Voltage Ripple Rejection Circuitry
• Balanced RCA Inputs
• Auto Turn On/Off
• Remote Soft Delay Turn On/Off Circuit
• 40 Click Variable Detente High/Low Pass Electronic Crossover
• 40 Click Variable Detente Bass Boost @ 45 Hz
• Variable Gain Control
• Wired Secondary Remote Gain Control Included
Specifications -
• Selectable Subwoofer EQ: 0 - 18 dB @ 40 Hz - 100 Hz,
• Variable Subsonic Freq: 10 Hz - 50 Hz
• Inputs: RCA (speaker level compatible)
• Subwoofer Frequency Range: 10Hz - 250 Hz
• 4-ohm Mono Power: 350 watts x 1
• 4-ohm Power: 350 watts x 1
• 1-ohm Mono Power: 800 watts x 1
• 2-ohm Power: 600 watts x 1
• Subwoofer EQ Frequency: 40 Hz- 100 Hz
• Variable Subwoofer EQ: 0 - 18 dB
• Low-Pass Crossover Freq: 20 Hz - 250 Hz
• Peak Power: 1600 watts
• Crossover Slope: 24 dB
• Dimensions (in Inches): 10.4" x 7.1" x 2.0"
• Input Sensitivity: 0.25 V - 10.0 V
• S/N Ratio: >100 dB
• Total Harmonic Distortion: 0.4% at Rated Power
• Strapped Output Power @ 2ohms: 1600 watts x 1
• Output Power (14.4 V) @ 4 ohm: 350 watts x 1
• Output Power (14.4 V) @ 2 ohm: 600 watts x 1
• Output Power (14.4 V) @ 1 ohm: 800 watts x 1
• Frequency Response: 10 Hz - 300 Hz