Description
Included in this kit
This bundle includes a PowerBass XMA-800D - 800 Watt x 1 @ 1-Ohm Class-D Amplifier, and a PowerBass 2XL-1040DS - 10" Dual 4-Ohm VC 650Wrms / 1300Wmax.
1x PowerBass XMA-800D - 800 Watt x 1 @ 1-Ohm Class-D Amplifier - (XMA-800D)
PowerBass XMA-800D 800 Watt Mono Block Compact Amplifier
The XMA amplifiers carry on the tradition of looking good and sounding great while taking up less space than any other amplifier we have ever offered ā and smaller than most amps available from the majority of our competitorsā at the same output levels. High efficiency FRD (Full Range Digital) technology allows these amplifiers to operate at well over 85% efficiency.
Limited space no longer means sacrificing great sound with the new PowerBass XMA Amplifiers.
Features -
⢠1,600 Watt High Efficiency Full-Range Class D Design
⢠2-OHM Stable Five Channel Amplifier
⢠Ultra Low Current Draw
⢠Double Sided Copper Plated PCB
⢠PWM MOSFET Power Supply
⢠Digital Sound Optimization Circuitry
⢠High Damping Control Circuit
⢠Variable Subsonic Filter
⢠High Current Voltage Ripple Rejection Circuitry
⢠Balanced RCA Inputs
⢠Auto Turn On/Off
⢠Remote Soft Delay Turn On/Off Circuit
⢠40 Click Variable Detente High/Low Pass Electronic Crossover
⢠40 Click Variable Detente Bass Boost @ 45 Hz
⢠Variable Gain Control
⢠Wired Secondary Remote Gain Control Included
Specifications -
⢠Selectable Subwoofer EQ: 0 - 18 dB @ 40 Hz - 100 Hz,
⢠Variable Subsonic Freq: 10 Hz - 50 Hz
⢠Inputs: RCA (speaker level compatible)
⢠Subwoofer Frequency Range: 10Hz - 250 Hz
⢠4-ohm Mono Power: 350 watts x 1
⢠4-ohm Power: 350 watts x 1
⢠1-ohm Mono Power: 800 watts x 1
⢠2-ohm Power: 600 watts x 1
⢠Subwoofer EQ Frequency: 40 Hz- 100 Hz
⢠Variable Subwoofer EQ: 0 - 18 dB
⢠Low-Pass Crossover Freq: 20 Hz - 250 Hz
⢠Peak Power: 1600 watts
⢠Crossover Slope: 24 dB
⢠Dimensions (in Inches): 10.4" x 7.1" x 2.0"
⢠Input Sensitivity: 0.25 V - 10.0 V
⢠S/N Ratio: >100 dB
⢠Total Harmonic Distortion: 0.4% at Rated Power
⢠Strapped Output Power @ 2ohms: 1600 watts x 1
⢠Output Power (14.4 V) @ 4 ohm: 350 watts x 1
⢠Output Power (14.4 V) @ 2 ohm: 600 watts x 1
⢠Output Power (14.4 V) @ 1 ohm: 800 watts x 1
⢠Frequency Response: 10 Hz - 300 Hz
1x PowerBass 2XL-1040DS - 10" Dual 4-Ohm VC 650Wrms / 1300Wmax - (2XL-1040DS)
PowerBass 2XL-1040DS 10" Subwoofer
PowerBass's new 2XLDS Subwoofers have been completely redesigned with a new custom cast aluminum basket and the motor moved to the outside of the basket in a more standard style to allow for lower frequency response and increased power handling, providing audiophile sound quality at extreme sound levels.
Featuring a new NBR Nitrile Butadiene Rubber surround for increased linear accuracy and a proprietary Woven Glass Fiber Kraft Reinforced cone the 2XL series is built to perform. The custom cast aluminum basket provides perimeter venting to assist in cooling the newly redesigned 2.5ā Black Kapton (BKSV) voice coil and inverted motor structure.
Features -
⢠10" Dual 4-Ohm Subwoofer
⢠600 watt RMS/ 1200 Watts Max
⢠Woven Glass Fiber Cone With Pressed Kraft Paper Reinforcement
⢠Nitrile Butadiene Rubber (NBR) Surround
⢠2.5" Vented BKSV Voice Coil Former
⢠Perimeter Aero-Vent Voice Coil Cooling Vents
⢠Non Resonance DDC Coated Cast Aluminum Basket
⢠XTRA XTRA Large Double Stacked Motor Structures
⢠Square Spring Loaded Nickel Plated Input Terminals
⢠Optimally Designed for Both Sealed or Ported Enclosures
Specifications -
⢠Nominal Impedance: Dual 4-ohm
⢠BL: 10.77
⢠Inputs: Dual Voice Coil
⢠Subwoofer Frequency Range: 30 Hz - 500 Hz
⢠Voice Coil Size: 2.5 in
⢠Material: Woven Glass Fiber and Kraft Paper
⢠Magnet Size: 48 oz
⢠Sensitivity (1W / 1M): 82 dB
⢠Motor Structure: 48 oz
⢠Cutout Diameter: 9.0"
⢠Mounting Depth: 7.75 in
⢠Xmax: 10
⢠Spl: 82
⢠No: 0.095%
⢠Qts: 0.752
⢠Qes: 0.871
⢠Qms: 5.509
⢠Mms: 231.3 g
⢠Cms: 74 uM/N
⢠Vas: 15.03 Ltr
⢠SD: 380.1
⢠Fs: 38.6 Hz
⢠Test Impedance: 1.80-ohm
⢠VC Impedance: 4-ohm + 4-ohm
⢠Size: 10 in
⢠Sensitivity: 82 dB
⢠Frequency Response: 30 Hz -500 Hz
⢠Voice Coil Size: 2.5 in
⢠Power Handling (RMS/Peak): 600 / 1200 watts