Description
The Punch Pro V2 PPROV2-65 is a 4-Ohm midrange speaker purpose-built for high SPL (Sound Pressure Level) systems, featuring a curvilinear pressed pulp cone with a multi-roll treated cloth surround for responsive output, along with a pure copper voice coil wrapped around a Kapton former for excellent power handling. Sold in pairs (2 each).
Designed for extreme SPL performance and maximum output
Anodized CNC machined aluminum phase plug for sound dispersion and cooling
Durable multi-roll treated cloth surround for high-output performance
Lightweight curvilinear pressed pulp cone with felt ring for responsive output
1.5" dual-layer pure copper voice coil boosts linearity and power handling
Kapton® voice coil former delivers high strength and thermal stability
Corrugated poly cotton spider for linear, stable control
Symmetrical ultra-flexible tinsel leads woven into spider for balanced control
Co-molded tin plated brass terminals for corrosion resistant, quick connections
Grilles sold separately
Specifications:
Speaker Type: Horn Tweeter
Speaker Size (Nominal Diameter): 1" (25.4 mm)
Nominal Impedance (Ohms): 4Ω
Frequency Response (Hz): 3kHz - 20kHz
Fs (Hz): 3.6 kHz
Sensitivity (dB @ 1W/1M): 105 dB
Sensitivity (dB @ 2.83V/1M): 108 dB
Voice Coil Diameter (in/mm): 1" (25.4 mm)
Power Handling (Watts RMS): 75 Watts RMS, 150 Watts Peak
Crossover Frequency (Hz): 12kHz High-Pass
Crossover Slope (Hz): 6dB/Octave
Mounting Depth: Rear Load: 2.95" (75 mm)/Front Load: 2.57" (65.2 mm)
Mounting Flange: Rear Load: 2.52" (64 mm)/Front Load: 3.64" (92.5 mm)
Cutout Diameter: Rear Load: 1.79" (45.5 mm)/Front Load: 2.52" (64.5 mm)
Front Clearance: Rear Load: 0.46" (11.7 mm)/Front Load: 0.47" (12 mm)
Grille/Trim Ring Included: Yes
Removable Motor Cover: No
Mounting Hardware: Yes
Included in the Box
(2) 4Ω 1" Tweeters
(8) #8 Hex Screws, 25 mm long
(8) M3 Hex Screws, 20 mm long
(1) 3 mm Hex Bit
(2) Front Load Trim Ring
(2) Rear Load Trim Ring
(1) Tweeter Cutout Template
Shipping Weight: 3.8 Lbs. (1.72 Kg.)
Designed for extreme SPL performance and maximum output
Anodized CNC machined aluminum phase plug for sound dispersion and cooling
Durable multi-roll treated cloth surround for high-output performance
Lightweight curvilinear pressed pulp cone with felt ring for responsive output
1.5" dual-layer pure copper voice coil boosts linearity and power handling
Kapton® voice coil former delivers high strength and thermal stability
Corrugated poly cotton spider for linear, stable control
Symmetrical ultra-flexible tinsel leads woven into spider for balanced control
Co-molded tin plated brass terminals for corrosion resistant, quick connections
Grilles sold separately
Specifications:
Speaker Type: Horn Tweeter
Speaker Size (Nominal Diameter): 1" (25.4 mm)
Nominal Impedance (Ohms): 4Ω
Frequency Response (Hz): 3kHz - 20kHz
Fs (Hz): 3.6 kHz
Sensitivity (dB @ 1W/1M): 105 dB
Sensitivity (dB @ 2.83V/1M): 108 dB
Voice Coil Diameter (in/mm): 1" (25.4 mm)
Power Handling (Watts RMS): 75 Watts RMS, 150 Watts Peak
Crossover Frequency (Hz): 12kHz High-Pass
Crossover Slope (Hz): 6dB/Octave
Mounting Depth: Rear Load: 2.95" (75 mm)/Front Load: 2.57" (65.2 mm)
Mounting Flange: Rear Load: 2.52" (64 mm)/Front Load: 3.64" (92.5 mm)
Cutout Diameter: Rear Load: 1.79" (45.5 mm)/Front Load: 2.52" (64.5 mm)
Front Clearance: Rear Load: 0.46" (11.7 mm)/Front Load: 0.47" (12 mm)
Grille/Trim Ring Included: Yes
Removable Motor Cover: No
Mounting Hardware: Yes
Included in the Box
(2) 4Ω 1" Tweeters
(8) #8 Hex Screws, 25 mm long
(8) M3 Hex Screws, 20 mm long
(1) 3 mm Hex Bit
(2) Front Load Trim Ring
(2) Rear Load Trim Ring
(1) Tweeter Cutout Template
Shipping Weight: 3.8 Lbs. (1.72 Kg.)