Description
PowerBass PS-ADF110T 10" Amplified Down firing Enclosure
PowerBass's latest release is an Amplified down firing single 10-inch woofer enclosure designed for pick-ups, crew cabs and king cabs. The PS-ADF110T uses an "S" thin woofer and is finished in a mix of grey vinyl and black carpet and comes with a built in 175W RMS amplifier.
By having the woofer point downward helps load the front of the woofer for more bass output than a standard front firing enclosure. It's small size makes it an instant winner for producing the bass that is missing in your system without taking up a lot of room or breaking the bank.
Features -
⢠Single 10" 175 Watt RMS Amplified Down firing Enclosure
⢠Computer Optimized 10" Thin Subwoofer Enclosure
⢠Custom Injected Molded Cone
⢠Large Roll Rubber Surround
⢠2" Vented KSV Voice Coil Former
⢠Perimeter Aero Voice Coil Venting
⢠Poly-carbonate/Glass Fiber Composite Turbine Basket
⢠Chrome Push Terminals
⢠2-Tone Vinyl/Carpet Finish
⢠1-Channel 275 Watt High Efficiency Class A/B Design
⢠High Level (Speaker)/Low Level RCA input
⢠Soft Delay Turn On/Off Circuit
⢠Auto Turn-on (high level input only)
⢠Variable Low Pass Electronic Crossover 50Hz - 200Hz
⢠Variable 12db Bass Boost EQ @ 45Hz
⢠Variable Gain Control
⢠Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
⢠Wired Remote Gain Control Included
⢠Down Firing Air Suspension Enclosure
⢠Heavy-Duty Reinforced Box Design
⢠Mounting Hardware Included
Specifications -
⢠Selectable Subwoofer EQ: 45Hz
⢠Nominal Impedance: 4-ohm
⢠Voice Coil Size: 2 in
⢠Material: pp cone
⢠Magnet Size: 116 oz
⢠Sensitivity (1W / 1M): 91 db
⢠4-ohm Mono Power: 275W
⢠4-ohm Power: 275W
⢠Low-Pass Crossover Freq: 50Hz-200Hz
⢠Peak Power: 500W
⢠Dimensions (in Inches): 5.6" x 12.4" x 17.8"
⢠Output Power (14.4 V) @ 4 ohm: 275W
⢠Size: 10 in shallow
⢠Frequency Response: 38Hz - 280Hz
⢠Voice Coil Size: 2"
⢠Power Handling (RMS/Peak): 275 / 500 watts
PowerBass's latest release is an Amplified down firing single 10-inch woofer enclosure designed for pick-ups, crew cabs and king cabs. The PS-ADF110T uses an "S" thin woofer and is finished in a mix of grey vinyl and black carpet and comes with a built in 175W RMS amplifier.
By having the woofer point downward helps load the front of the woofer for more bass output than a standard front firing enclosure. It's small size makes it an instant winner for producing the bass that is missing in your system without taking up a lot of room or breaking the bank.
Features -
⢠Single 10" 175 Watt RMS Amplified Down firing Enclosure
⢠Computer Optimized 10" Thin Subwoofer Enclosure
⢠Custom Injected Molded Cone
⢠Large Roll Rubber Surround
⢠2" Vented KSV Voice Coil Former
⢠Perimeter Aero Voice Coil Venting
⢠Poly-carbonate/Glass Fiber Composite Turbine Basket
⢠Chrome Push Terminals
⢠2-Tone Vinyl/Carpet Finish
⢠1-Channel 275 Watt High Efficiency Class A/B Design
⢠High Level (Speaker)/Low Level RCA input
⢠Soft Delay Turn On/Off Circuit
⢠Auto Turn-on (high level input only)
⢠Variable Low Pass Electronic Crossover 50Hz - 200Hz
⢠Variable 12db Bass Boost EQ @ 45Hz
⢠Variable Gain Control
⢠Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
⢠Wired Remote Gain Control Included
⢠Down Firing Air Suspension Enclosure
⢠Heavy-Duty Reinforced Box Design
⢠Mounting Hardware Included
Specifications -
⢠Selectable Subwoofer EQ: 45Hz
⢠Nominal Impedance: 4-ohm
⢠Voice Coil Size: 2 in
⢠Material: pp cone
⢠Magnet Size: 116 oz
⢠Sensitivity (1W / 1M): 91 db
⢠4-ohm Mono Power: 275W
⢠4-ohm Power: 275W
⢠Low-Pass Crossover Freq: 50Hz-200Hz
⢠Peak Power: 500W
⢠Dimensions (in Inches): 5.6" x 12.4" x 17.8"
⢠Output Power (14.4 V) @ 4 ohm: 275W
⢠Size: 10 in shallow
⢠Frequency Response: 38Hz - 280Hz
⢠Voice Coil Size: 2"
⢠Power Handling (RMS/Peak): 275 / 500 watts