Description
Included in this kit
Complete, five-channel powered sound system upgrade package
The package includes two sets of 6.5” weather-resistant mid-bass drivers and 1” weather-resist tweeters that replace the front and rear soundbar factory speakers, an 8” powered, compact subwoofer, and a 4-channel power pack amplifier.
The weather-resistant speakers are designed for powerful, top-off performance that’s unhindered by weather, wind, or other noise while driving.
The 6.5” mid-bass drivers bring out the full potential of your sound, while the tweeters capture the high frequencies often lost in music reproduction.
The 8” compact subwoofer adds deep, accurate bass that grounds your sound system.
Vehicle-specific speaker connectors and pods designed for the 2018 - Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator are included for plug-and-play installation.
Tweeter adapter plates use the original factory tweeter locations to take the guesswork out of installation.
Vehicle-specific mounting brackets are included to secure the 8” compact subwoofer and 4-channel amplifier under the passenger seat without drilling.
• The PSS-24WRA is a 300-Watt Complete Sound System Upgrade Package for the four-door, non-amplified 2018 – Up Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator.
• The PSS-24WRA is compatible with the i407-WRA-JL 7-Inch Multimedia Receiver and X409-WRA-JL 9-Inch Weather-Resistant Navigation System with Off-Road Mode.
• The PSS-24WRA also includes a vehicle-specific T-harness for installation with the factory radio into a compatible four-door, non-amplified NEW 2018 – 2020 Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator.
• The PSS-24WRA has 5-channels of powered sound that replace your factory system.
Front (SPV-65X-WRA):
• Power handling: 75 watts RMS (225 watts peak)
• Compatible with four-door, non-amplified 2018 - Up Jeep® Wrangler and non-amplified 2020 – Up Jeep® Gladiator
• Frequency response: 65kHz – 22kHz
• Nominal impedance: 4 ohms
• Weather-resistant: IP55
Rear (SPV-65-JLT):
• Power handling: 90 watts RMS (270 watts peak)
• Frequency response: 50kHz – 22kHz
• Nominal impedance: 4 ohms
• SPV-65-JLT weather-resistant rear soundbar speaker system
• Weather-resistant: IP55
Powered Subwoofer (PWE-S8):
• 120 watts RMS (240 watts peak)
• Includes Alpine’s SPV-65X-WRA, SPV-65-JLT, PWE-S8, and KTP-445U
• Frequency response: 32 - 150Hz
• Variable low-pass crossover (80-200 Hz)
• Variable phase control (0-180 degrees)
• preamp- and speaker-level inputs
Four Channel Power Pack Amplifier (KTP-445U):
• 45 watts RMS x 4 at 4 or 2 ohms
• Rugged, premium grills designed to emulate the factory look and appeal
• 90 watts RMS x 2 bridged at 4 ohms
• Selectable high-pass filters (60, 80, or 120 Hz at 12 dB/octave)
• Switchable RCA or speaker-level inputs
• Package Dimensions: 27” L x 18.5” W x 19.5” H, 40lbs
Included:
• KTP-445U Universal 4-Channel Power Amplifier
• PWE-S8 8" Compact Powered Subwoofer
• SPV-65X-WRA Front Component Speakers
• SPV-65-JLT Rear Sound Bar Speakers
• ALP-POD-JLT Front Speaker Pod
• PSU-BKT-JL-R PWE Right Bracket JL
• PSU-BKT-JL-L PWE Left Bracket JL
• ALP-HRN-PSU300 PSU Power Harness
• ALP-THRN-CH2 Chrysler T-Harness
• CT6 6" Cable Ties
• PHPSM412 Pan Head Phillips Screw M4x12
• SLWM4 M4 Split Lock Washers
• PHSCR832 8-32 Pan Head Phillips screws
• PSS-WRA-IM Installation Manual
Features:
• Utilizes factory bolt locations
• Durable stamped, steel frame speaker basket design
• Includes template for mounting
• Vehicle specific T-harness for installation with OEM radio into compatible 2018 – Up Jeep® Wrangler and 2020 – Up Jeep® Gladiator vehicles
• Vehicle specific mounting brackets allow for the powered sub and amp to be secured under the passenger seat without drilling
Used Frequently Asked Questions
- What does used mean? Used products may be unused customer returns that are essentially "new" items, or they may be previously installed products that were returned under warranty or during our return policy period.
- What is the warranty? All of our used items come with a 90-day warranty.
- What's it look like? All of our used items are inspected and graded by our returns team at our facilities. They will test them and grade them to one of four standard gradings: Used Open Box, Used Very Good, Used Good, and Used Acceptable. Please see the following descriptions of each grade - also note that if an item falls under ANY of the criteria for a certain grade, even though the rest of the product is better, we will give it the lowest grade.
- Used Open Box An item in perfect working condition. Original protective wrapping may be missing, but the original packaging is intact and in good condition with minor damage possible. Instructions are included.
- Used Very Good A well-cared-for item with limited use, remains in good working condition. The item may show some limited signs of wear,small scratches,cosmetic blemishes. Item may arrive with damaged packaging or be repackaged and could be missing some accessories.
- Used Good The item shows wear from use, remains in good condition and functions properly. May have damaged packaging or be repackaged. It may be marked, have identifying markings on it, have minor cosmetic damage. It may be missing some parts or accessories.
- Used Acceptable The item is fairly worn but continues to function properly. While repackaged; signs of wear can include aesthetic issues; scratches, dents. The item may have markings on it or show signs of previous use. Item may be missing some parts or accessories.
- Have more questions? Call us, send us a chat, or an email. We'll be able to answer any additional questions you may have.