Description
JBL RALLYBAR is a IP66 rated water resistant Bluetooth® Soundbar with 150Wrms amplifier, extraordinary sound experience and unique dynamic LED lights to UTVs, golf carts, boats and other vehicles built for recreation. Each RALLYBAR can be used by itself or connected to multiple RALLYBAR or RALLYBAR family products (RALLYBAR, RALLYBAR S and RALLYBAR XL) by using its built-in broadcast mode.
Features:
• Unique Dynamic LED Lights
• 150Wrms Class-D Amplifier Built-in
• IP66 Rated Water and dust Resistant
• Support Broadcast Mode
• Support Party Mode
• JBL Pro Sound
• Innovative Mounting Kits Design
• Music Remote Control by JBL Click
• Support Bluetooth®, USB Disk and 3.5mm Auxiliary Input Audio Source Play
• Variable AUX-OUT
• 3 Different Gain Settings
Specifications: • Output Power: 150WRMS; 300W PEAK (IEC60268)
• THD at Rated RMS Power: <1%
• Voltage Range: 9.6-16VDC
• Quiescent Current Draw: <0.9A
• Maximum Current Draw: 25A
• Frequency response: 45Hz-40kHz
• Signal-to-noise Ratio: > 80 dB
• Cable type: 12AWG.
• Cable length: 12 Feet (3.66m)
• Bluetooth® Version: 5.3
• Bluetooth® profile: A2DP V1.3, AVRCP V1.6
• Bluetooth® transmitter frequency range: 2400 MHz–2483.5 MHz
• Bluetooth® transmitter power: ≤ 15 dBm (EIRP)
• Aux-In: 2Vrms (0.35Vrms-2Vrms); 4Vrms (0.7Vrms-4Vrms); 6Vrms (1.05Vrms-6Vrms) (3.5 mm connector)
• Aux-Out: 2 Vrms (3.5 mm connector)
• USB format: FAT16, FAT32
What's in the Box:
1x Soundbar
2x Security cables
1x Small Wrench
1x L-Small Allen wrench
1x T-handle hex wrench
2x Straps with Velcro
1x G-Clamp
1x Keychain
1x 12ft (3.66m) power/ground wire harness
2x Rubber top covers
2x Mount cleats
2x Short M8 screws
2x Short M5 screws
2x Long M5 screws
2x M5 screw nuts
4x Flat washers
2x C-Clamps (2”)
2x C-Clamps (1.75”)
2x Thick rubber strips (for 1.5” pole)
2x Thin rubber strips (for 2” &1.75” pole)
1x Quick start guide
1x Safety sheet &warranty card
Features:
• Unique Dynamic LED Lights
• 150Wrms Class-D Amplifier Built-in
• IP66 Rated Water and dust Resistant
• Support Broadcast Mode
• Support Party Mode
• JBL Pro Sound
• Innovative Mounting Kits Design
• Music Remote Control by JBL Click
• Support Bluetooth®, USB Disk and 3.5mm Auxiliary Input Audio Source Play
• Variable AUX-OUT
• 3 Different Gain Settings
Specifications: • Output Power: 150WRMS; 300W PEAK (IEC60268)
• THD at Rated RMS Power: <1%
• Voltage Range: 9.6-16VDC
• Quiescent Current Draw: <0.9A
• Maximum Current Draw: 25A
• Frequency response: 45Hz-40kHz
• Signal-to-noise Ratio: > 80 dB
• Cable type: 12AWG.
• Cable length: 12 Feet (3.66m)
• Bluetooth® Version: 5.3
• Bluetooth® profile: A2DP V1.3, AVRCP V1.6
• Bluetooth® transmitter frequency range: 2400 MHz–2483.5 MHz
• Bluetooth® transmitter power: ≤ 15 dBm (EIRP)
• Aux-In: 2Vrms (0.35Vrms-2Vrms); 4Vrms (0.7Vrms-4Vrms); 6Vrms (1.05Vrms-6Vrms) (3.5 mm connector)
• Aux-Out: 2 Vrms (3.5 mm connector)
• USB format: FAT16, FAT32
What's in the Box:
1x Soundbar
2x Security cables
1x Small Wrench
1x L-Small Allen wrench
1x T-handle hex wrench
2x Straps with Velcro
1x G-Clamp
1x Keychain
1x 12ft (3.66m) power/ground wire harness
2x Rubber top covers
2x Mount cleats
2x Short M8 screws
2x Short M5 screws
2x Long M5 screws
2x M5 screw nuts
4x Flat washers
2x C-Clamps (2”)
2x C-Clamps (1.75”)
2x Thick rubber strips (for 1.5” pole)
2x Thin rubber strips (for 2” &1.75” pole)
1x Quick start guide
1x Safety sheet &warranty card