Description
JBL RALLYBAR S is a IP66 rated water resistant Bluetooth® Soundbar with 150Wrms amplifier and extraordinary sound experience to UTVs, golf carts, boats and other vehicles built for recreation. Each RALLYBAR S can be used by itself or connected to multiple RALLYBAR S or RALLYBAR S family products (RALLYBAR, RALLYBAR S and RALLYBAR XL) by using its built-in broadcast mode. The innovative mounting kits design (patent pending) offers multiple position combinations on top and back to accommodate a variety of installation requirements.
Features
150Wrms Class-D Amplifier Built-in
IP66 Rated Water and dust Resistant
Support Broadcast Mode
Support Party Mode
JBL Pro Sound
Innovative Mounting Kits Design
Music Remote Control by JBL Click
Support Bluetooth®, USB Disk and 3.5mm Auxiliary Input Audio Source Play
Variable AUX-OUT
3 Different Gain Settings
Technical Specifications
Transducers: 4x 2.75”(70mm) woofers; 2x 1”(25mm) Tweeters; 2 x 7.2”(182.8mm)x 3”(76.2mm)Racetrack Passive Radiators
Output Power: 150WRMS; 300W PEAK (IEC60268)
THD at Rated RMS Power: <1%
Voltage Range: 9.6 - 16VDC
Quiescent Current Draw:<0.9A
Maximum Current Draw: 25A
Frequency response: 45Hz-40kHz
Signal-to-noise Ratio:> 80 dB
Cable type: 12AWG.
Cable length: 12 Feet (3.66m)
Bluetooth® Version: 5.3
Bluetooth® profile:A2DP V1.3, AVRCP V1.6
Bluetooth® transmitter frequency range:2400 MHz – 2483.5 MHz
Bluetooth® transmitter power:≤ 15dBm (EIRP)
What’s in the box
1x Soundbar
2x Security cables
1xSmall Wrench
1 x L- Small Allen wrench
1xT-handle hex wrench
2x Straps with Velcro
1X G -Clamp
1x Keychain
1x 12ft (3.66m) power/ground wire harness 2x Rubber top covers
2x Mount cleats
2x Short M8 screws
2x Short M5 screws
2x Long M5 screws
2x M5 screw nuts
4X Flat washers
2X C -Clamps (2”)
2X C -Clamps (1.75”)
2X Thick rubber strips (for 1.5” pole)
2x Thin rubber strips (for 2” &1.75” pole)
1x Quick start guide
1x Safety sheet &warranty card
Features
150Wrms Class-D Amplifier Built-in
IP66 Rated Water and dust Resistant
Support Broadcast Mode
Support Party Mode
JBL Pro Sound
Innovative Mounting Kits Design
Music Remote Control by JBL Click
Support Bluetooth®, USB Disk and 3.5mm Auxiliary Input Audio Source Play
Variable AUX-OUT
3 Different Gain Settings
Technical Specifications
Transducers: 4x 2.75”(70mm) woofers; 2x 1”(25mm) Tweeters; 2 x 7.2”(182.8mm)x 3”(76.2mm)Racetrack Passive Radiators
Output Power: 150WRMS; 300W PEAK (IEC60268)
THD at Rated RMS Power: <1%
Voltage Range: 9.6 - 16VDC
Quiescent Current Draw:<0.9A
Maximum Current Draw: 25A
Frequency response: 45Hz-40kHz
Signal-to-noise Ratio:> 80 dB
Cable type: 12AWG.
Cable length: 12 Feet (3.66m)
Bluetooth® Version: 5.3
Bluetooth® profile:A2DP V1.3, AVRCP V1.6
Bluetooth® transmitter frequency range:2400 MHz – 2483.5 MHz
Bluetooth® transmitter power:≤ 15dBm (EIRP)
What’s in the box
1x Soundbar
2x Security cables
1xSmall Wrench
1 x L- Small Allen wrench
1xT-handle hex wrench
2x Straps with Velcro
1X G -Clamp
1x Keychain
1x 12ft (3.66m) power/ground wire harness 2x Rubber top covers
2x Mount cleats
2x Short M8 screws
2x Short M5 screws
2x Long M5 screws
2x M5 screw nuts
4X Flat washers
2X C -Clamps (2”)
2X C -Clamps (1.75”)
2X Thick rubber strips (for 1.5” pole)
2x Thin rubber strips (for 2” &1.75” pole)
1x Quick start guide
1x Safety sheet &warranty card