Description
Included in this kit
This bundle includes a Rockford Fosgate M5-800X4 4 Channel Element Ready Amplifier - 125x4 @ 4-Ohm, 200x4 @ 2-Ohm, 400x2 @ 4-Ohm Bridged, a Rockford Fosgate PMX-HD9813 Media Receiver Compatible With 1998-2013 Harley Davidson - 3ā Color Display, Bluetooth, SiriusXM Ready, Pandora, a Rockford Fosgate TMS6RG 6ā Full Range Coaxial For 1998-2013 Road Glide- 75 Watts Rms, 150 Watts Peak, Grilles Included, a Rockford Fosgate TMS69BL9813 6x9ā Full Range Coaxial With Bag Lid Adapters For 1998-2013 Models, 100 Watts Rms, 200 Watts Peak, Grilles Included, and a Rockford Fosgate RFK-HD9813M5 Complete Amp Install Kit Compatible with Select 1998-2013 Road Glide, Street Glide, & Electra Glide Motorcycles.
1x Rockford Fosgate M5-800X4 4 Channel Element Ready Amplifier - 125x4 @ 4-Ohm, 200x4 @ 2-Ohm, 400x2 @ 4-Ohm Bridged - (M5-800X4)
Rockford Fosgate 800 Watt 4-Channel Element Readyā¢ Amplifier
The M5-800X4 amplifier features the next level of Element Readyā¢ design from Rockford Fosgate thatās built as rugged as the outdoor environment itās used in. The IPX6 rating is provided by splash guards on both ends and heavy-duty molded harnesses with integral sealing gaskets. A new PRESET switch - for use with Rockford Fosgate UTV audio kits - eliminates the need to set-up and tune the amp for the best experience possible. Built on the popular TM series, M5 amplifiers feature the same great technologies like Constant Power, Class-AD and C.L.E.A.N., all engineered, developed, and validated in Tempe, Arizona.
Rockford Fosgate amplifiers are known world-wide for producing more power than their ratings suggest. The M5 amplifiers are the first series based on new industry standard Dynamic Power ratings, bringing their conservative ratings to the forefront. Engineered from the ground up and purpose-built to deliver more output where you actually hear it, this is real dynamic power that performs not only on paper, but performance heard through the musical experience. Youāll see two amplifier power ratings, the traditional Continuous Power output, and the new Dynamic Power output, both tested in accordance with the CTA-2006 specification. Consider Continuous Power as wattage developed on the test bench for comparison against other amplifiers in the same class, and Dynamic Power as real-world wattage when connected to a speaker load, listening to music. Either way you look at it, Rockford Fosgate is proving ā once again ā these amplifiers are powerful enough to drive any speaker or subwoofer you throw at them.
- Element Readyā¢ design with integrated harness & panel seals
- PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
- Play all day, easy to integrate, and keep music playing for extended lengths of time
- C.L.E.A.N. input/output clip detection and indicator LEDs
- Constant Power provides instantaneous delivery of output over varying impedance loads
- Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
- Top mounted control panel with Element Readyā¢ smoked lens cover
- OEM and aftermarket radio integration inputs
- Low Impedance Stability
- Proprietary testing using RATS (Rockford Automated Testing System)
- Proprietary Class-AD technology allows amplifier to produce more power with less current draw
- Discrete Surface Mount technology utilizes 1% tight-tolerances for high efficiency and reduced cross-talk
- MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span
- Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise
- Balanced Differential Inputs eliminates noise picked up by signal cables
- Remote-Out feature when using high level inputs
- 2-Year Warranty
General Specifications
CEA-2006 Compliant
Yes
Cta-2006 Compliant
Number of Channels
4
Total Power
(Sum of Rated Power)
(Sum of Rated Power)
800 Watts
Rated Power
(RMS Continuous Power)
(RMS Continuous Power)
CTA-2006 Continuous Power Rating100 Watts x 4 @ 4Ī©
100 Watts x 4 @ 2Ī©
200 Watts x 2 @ 4Ī© Bridged/Mono
ā¤1.0% THD+N
Dynamic Power
(PVC/PowerCubeĀ®)
(PVC/PowerCubeĀ®)
CTA-2006 Dynamic Power Rating125 Watts x 4 @ 4Ī©
200 Watts x 4 @ 2Ī©
400 Watts x 2 @ 4Ī© Bridged/Mono
Bridgeable
Yes
Frequency Response
10 Hz - 50 kHz
Input Sensitivity
150mVrms - 12Vrms
Circuit Topology Class
Class-AD
Efficiency (average)
>75%
Total Harmonic Distortion (THD+Noise)
<0.25% THD+N @ 1 Watt
Signal Input
Low-Level: 4 RCA
High-Level: (2) 4-Pin Molex
High-Level: (2) 4-Pin Molex
Signal Output
ā
Tone Controls
Front/Rear: 0-14dB @ 12.5kHz
Front/Rear: 0-18dB @ 45Hz
Front/Rear: 0-18dB @ 45Hz
Crossover Controls
High-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
All-Pass: Yes
50 Hz - 250 Hz @ 12dB/Octave Butterworth
Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth
All-Pass: Yes
Remote Controls
No
Visual Indicators
Power: Blue
Protect: Red
Input Clip: Red
Output Clip: Blue/Red
Protect: Red
Input Clip: Red
Output Clip: Blue/Red
Power Wire Gauge
8 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
16 AWG
Speaker Output Connector
4-Pin Molex
Cooling
Convection
Heatsink
Extruded Aluminum
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
(not included)
ā
Average Current Draw (13.8V Music)
ā
Max. Current Draw (13.8V Sinewave)
55 A @ 4Ī©
85 A @ 2Ī©
90 A @ 4Ī© Bridged
85 A @ 2Ī©
90 A @ 4Ī© Bridged
Suggested Alternator
Dimensional Diagram
Dimensions (H x W x D)
1.7" x 4.25" x 8.41"
(42.8 mm x 108 mm x 213 mm)
Does not include harnesses
(42.8 mm x 108 mm x 213 mm)
Does not include harnesses
Shipping Weight
TBA
1x Rockford Fosgate PMX-HD9813 Media Receiver Compatible With 1998-2013 Harley Davidson - 3ā Color Display, Bluetooth, SiriusXM Ready, Pandora - (PMX-HD9813)
Rockford Fosgate Digital Media Receiver for 1998-2013 Harley-Davidson
Direct replacement digital media receiver for select 1998 - 2013 Harley-DavidsonĀ® motorcycles. Features 3-inch full color, ultra-bright display with day/night modes and oversized buttons for easy control. Engineered for the ultimate in performance and sound quality featuring 4-Volt pre-amp outputs that don't clip! Plug and play installation with OEM electrical system requires no additional wiring or cutting of existing factory harnesses or components. Retains factory thumb controls. Refer to our COMPATIBILITY chart to verify fitment before purchasing.
Plug and play installation requires factory wiring harness and connectors in order to retain functionality. Systems requiring rear speaker-line outputs will require additional harness (sold separately.) PMX source unit not compatible with factory amplified systems, CB, Intercom, rear volume controls, rear speakers on 1998-2005 Ultraās, and factory equipped satellite radio systems. Estimated Installation Time: 1 HOUR.
- 1998-2013 Harley-DavidsonĀ® direct replacement Media Receiver
- A2DP and AVRCP BluetoothĀ® Wireless Streaming
- PandoraĀ® Internet Radio Control
- SiriusXMĀ® Ready (requires SiriusXMĀ® SXV300 tuner)
- Digital AM / FM Tuner
- USB Input with 1.5A USB Charging
- AUX Input
- 3" Full Color TFT Display with Day/Night Mode
- Retains Factory Handle Bar Audio Controls
- Voltage gauge with Low voltage Warning
- 7-Band Graphic EQ + PEQ
- Plug and Play Installation with OEM electrical connectors
- Independent Subwoofer Level Control
- Compatible with PMX-BTUR Remote control
- Multi Region Radio Frequencies
- Selectable HP/LP/AP Crossover with Selectable 12/24 dB/Octave Slope
- Software updatable via USB
- 2-Year Warranty
- *Antenna not included
Compatibility
Plug and play installation requires factory wiring harness and connectors in order to retain functionality. Systems requiring rear speaker-line outputs will require additional harness available in the RFK-HD9813 or separately with the 1130-72997-01.
1 Not compatible with factory amplified systems, CB, Intercom, rear volume controls, rear speakers on 1998-2005 Ultraās, and factory equipped satellite radio systems.
| YEAR | MAKE | MODEL |
|---|---|---|
| 2006-2013 | Harley DavidsonĀ® | Street GlideĀ®1 |
| 1998-2013 | Harley DavidsonĀ® | Road GlideĀ®1 |
| 1998-2013 | Harley DavidsonĀ® | Electra GlideĀ®1 |
Specifications
Operating Voltage
9.5 - 16 VDC
Output Power
CEA-2006 Power Rating25W x 4 @ 4ā¦ RMS
50W x 4 @ 2ā¦ MAX
ā¤1.0% THD+N
Output Impedance
< 500 Ohms
Idle Current
< 2 Amps
Frequency Response
RCA: 20Hz - 20 kHz
High-Level: 20Hz - 20 kHz
High-Level: 20Hz - 20 kHz
RCA Output Voltage
Front: 4 V Max
Rear: 4 V Max
Sub: 4 V Max
Rear: 4 V Max
Sub: 4 V Max
THD+N
4-Ohms: < 1.0 %
Channel Separation
RCA: > 50 dB
High-Level: > 50 dB
High-Level: > 50 dB
Signal-to-Noise Ratio
RCA 2V: > 85 dB
High Level (CEA-2006): > 75 dB
Max Wrms: > 80 dB
High Level (CEA-2006): > 75 dB
Max Wrms: > 80 dB
AM Tuner
Range: 530 - 1710 kHz
Sensitivity: 40 dB
Frequency Response: 45 to 2.4 kHz
Sensitivity: 40 dB
Frequency Response: 45 to 2.4 kHz
FM Tuner
Range: 87.9 - 107.9 MHz
Sensitivity: 8 dB
Frequency Response: 20 - 15 kHz
Sensitivity: 8 dB
Frequency Response: 20 - 15 kHz
BluetoothĀ®
3.0+EDR
A2DP 1.3
A2DP 1.3
Supported Media Formats
MP3
WMA
WMA
USB Version
2.0
USB Output Current
1.5A
USB Capacity
32 Gb max
255 Folders max
999 Songs max
Format Win USB as FAT32
Format Mac USB as MS-DOS (FAT)
255 Folders max
999 Songs max
Format Win USB as FAT32
Format Mac USB as MS-DOS (FAT)
Clock
Yes
Display Size:
Nominal Size: 3" Color TFT
Resolution: 960 x 240
Brightness: 380 nits
Contrast: 400
Pixels: 320 x 240
View Angle: 120
Resolution: 960 x 240
Brightness: 380 nits
Contrast: 400
Pixels: 320 x 240
View Angle: 120
Made for iPhone Models
iPhone XS Max
iPhone XR
iPhone 8 Plus
iPhone 7 Plus
iPhone SE
iPhone 6s
iPhone 6
iPhone 5c
iPhone XS
iPhone X
iPhone 8
iPhone 7
iPhone 6s Plus
iPhone 6 Plus
iPhone 5s
iPhone 5
iPhone XR
iPhone 8 Plus
iPhone 7 Plus
iPhone SE
iPhone 6s
iPhone 6
iPhone 5c
iPhone XS
iPhone X
iPhone 8
iPhone 7
iPhone 6s Plus
iPhone 6 Plus
iPhone 5s
iPhone 5
Shipping Weight
4.75 Lbs. (2.15 Kg)
Made for iPod Models
iPod touch (5th generation)
iPod touch (6th generation)
iPod touch (6th generation)
Dimensions
(HxWxD)
(HxWxD)
Faceplate: 2.7" x 8.4" x 0.7"
(68.4 mm x 213 mm x 17.1 mm)
Chassis: 2.5" x 8.2" x 7.5"
(63.5 mm x 209.3 mm x 191 mm)
(68.4 mm x 213 mm x 17.1 mm)
Chassis: 2.5" x 8.2" x 7.5"
(63.5 mm x 209.3 mm x 191 mm)
1x Rockford Fosgate TMS6RG 6ā Full Range Coaxial For 1998-2013 Road Glide- 75 Watts Rms, 150 Watts Peak, Grilles Included - (TMS6RG)
Rockford Fosgate Power Harley-DavidsonĀ® Road GlideĀ® 6.5" Full Range Fairing Speakers (1998-2013)
The TMS6RG is a full range coaxial speaker designed to fit the fairing speaker locations on select model Harley-DavisonĀ® Road GlideĀ® Motorcycles. It features a Neodymium motor structure driving a co-molded, reinforced polypropylene cone with Santoprene surround. It also features an ultra-efficient 25mm dome tweeter with integrated phase plug and is made water/weather resistant with the addition of a Santoprene front isolation spider connecting between the tweeter housing and cone assembly. The speaker mounts using the factory hardware and comes with new grille assemblies. See compatibility chart for fitment.
The TMS6RG full range coaxial speaker is designed for direct fitment applications on select (see compatibility chart) Harley-DavidsonĀ® Road GlideĀ® motorcycles in the upper fairing locations. This speaker directly replaces the existing factory speakers using the factory mounting hardware and speaker connectors.
It features a compact Neodymium motor structure driving a co-molded, reinforced polypropylene cone with Santoprene surround This ensures that you get maximum frequency response and output in both the mid and low frequency range. It also features an ultra-efficient 25mm dome tweeter with integrated phase plug for crisp clear highs even at highway cruising speeds.
It is made water/weather resistant with the addition of a Santoprene front isolation spider connecting between the tweeter housing and cone assembly. The speaker requires no modification of the factory location and comes with new grille assemblies.
Harley-DavidsonĀ® and Road GlideĀ® are registered trademarks of Harley-Davidson Motor Company
- Element Ready design that is weather and water resistant
- UltraāEfficient 25mm Proprietary Film Dome Tweeter
- Neodymium Tweeter with Integrated Phase Plug and ASA Grill
- CarbonāFiber ReāInforced Polypropylene Cone
- Santoprene VAST Surround
- CoāMolded Cone and Surround
- Santoprene Front Isolation Spider
- PolyāCotton Spider
- High Power 35mm VoiceāCoil
- UltraāEfficient Neodymium Ring Magnet Motor
- UltraāHigh Temperature Glass Reinforced Polymer Frame
- Integrated Spade Terminals
- Integrated 6dB Crossover with High Power Polyester Capacitor
- Low Profile Coaxial Tweeter Design
- Discreet (Hidden) Tweeter Wire
- Designed for 1998ā2013 Harley-DavidsonĀ® Road GlideĀ® Fairing Locations
- NOTE: Installation on CVOā¢ and Screaming Eagleā¢ models are not plug-n-play and will require modification
- 2-Year Warranty
Fitment
| YEAR | MAKE | CHASSIS | MODEL | FAIRING |
|---|---|---|---|---|
| 1998ā2013 | Harley-DavidsonĀ® | FLTR | Road GlideĀ® | Shark Nose |
| 2012 | Harley-DavidsonĀ® | FLTRX | Road GlideĀ® Custom | Shark Nose |
Specifications
CEA-2031 Compliant
Speaker Type
2-Way Coax
Midrange Size
(Nominal Diameter)
(Nominal Diameter)
6.5"
Nominal Impedance (Ohms)
4-Ohm
Frequency Response (Hz)
56 Hz - 20 kHz
Power Handling (MAX)
150 Watts MAX
Power Handling (RMS)
75 Watts RMS
Sensitivity
(dB @ 2.83V/1M)
(dB @ 2.83V/1M)
94 dB
Sensitivity
(dB @ 1W/1M)
(dB @ 1W/1M)
91 dB
Voice Coil Diameter (in/mm)
1.40"
(35.6 mm)
(35.6 mm)
Crossover
Built-in tweeter crossover
Mounting Hardware
Yes
Grille/Trim Ring Included
Yes
Included In The Box
(2) Speakers
(2) Speaker Grilles
(1) Hardware Pack
(2) Speaker Grilles
(1) Hardware Pack
1x Rockford Fosgate TMS69BL9813 6x9ā Full Range Coaxial With Bag Lid Adapters For 1998-2013 Models, 100 Watts Rms, 200 Watts Peak, Grilles Included - (TMS69BL9813)
Rockford Fosgate Harley-DavidsonĀ® Saddlebag Audio Kit (1998-2013)
Retrofit kit allows addition of rear speakers on your existing factory bag lids and plug directly into a Rockford Fosgate front audio kit that utilizes the Power TM400X4ad 4-channel amplifier. Eliminates need to paint and color match. Not designed for factory amplifiers. Refer to our COMPATIBILITY chart to verify fitment before purchasing.
If you need more than just two speakers and want to really feel your music while riding then check out our add-on bag lid audio solution. Centered around our TMS69 6x9" speaker this kit is designed to work with existing OEM bag lids. This means no extra parts to purchase or custom paint schemes to match. Easy to install using our included cutting template and two-piece mounting system you can quickly add on to an existing or new fairing audio kit using with the included plug and play harness. This system is designed to plug directly into the Rockford Fosgate Power T400X4ad or TM400X4ad 4-channel amplifier. Not designed for factory amplifiers.
Harley-DavidsonĀ®, Road GlideĀ®, and Street GlideĀ® are registered trademarks of Harley-Davidson Motor Company
- Designed for use with 1998-2013 Factory Harley-DavidsonĀ® Hardshell Bag Lids
- Designed for use with existing 1998-2013 Rockford Fosgate Stage kits
- UltraāHigh Temperature Glass Reinforced Polymer Frame
- Direct Connect Wiring Harness to Rockford Fosgate Amplifiers
- Painted Stamped Steel Grill with ASA Plastic Frame for UV Protection
- Sandwich Clamping Gasket Design for Environmental Seal
- Includes Custom Cut Out Guide
- TMS69 Power Element Ready 6x9ā full range speakers
- Includes all Installation Hardware and Accessories
- Patent Pending
- Leave 2" minimum clearance under speaker magnet when packing bags
Fitment
| YEAR | MAKE | MODEL | AMPLIFIER |
|---|---|---|---|
| 1998-2013 | Harley DavidsonĀ® | Road GlideĀ® 1,2,3,4 | T400X4ad or TM400X4ad |
| 1998-2013 | Harley DavidsonĀ® | Electra GlideĀ® 1,2,3,4 | T400X4ad or TM400X4ad |
| 2006-2013 | Harley DavidsonĀ® | Street GlideĀ® 1,2,3,4 | T400X4ad or TM400X4ad |
1 Compatible only with ABS plastic lids. Not compatible with Fiberglass lids.
2 Installation on CVOā¢ and Screaming Eagleā¢ models are not plug-n-play and will require modification
3 May not be compatible with H-DĀ® Power Lock Kit
4 Tour-PakĀ® speakers not 100% plug-n-play compatible (contact support on work-around)
Specifications
Shipping Weight
8.6 Lbs. (3.9 Kg.)
Included In The Box
(2) TMS69 Speakers
(2) Speaker Grilles
(2) 6"x9" Basket Protectors
(2) Mounting Rings
(2) Cutting Templates
(16) Mounting Screws
(1) Main Harness
(2) Saddlebag Harnesses
Plastic Wire Tie Wraps
Plastic Cable Tie Mounts
(2) Speaker Grilles
(2) 6"x9" Basket Protectors
(2) Mounting Rings
(2) Cutting Templates
(16) Mounting Screws
(1) Main Harness
(2) Saddlebag Harnesses
Plastic Wire Tie Wraps
Plastic Cable Tie Mounts
Grille/Trim Ring Included
Yes
Mounting Hardware
Yes
1x Rockford Fosgate RFK-HD9813M5 Complete Amp Install Kit Compatible with Select 1998-2013 Road Glide, Street Glide, & Electra Glide Motorcycles - (RFK-HD9813M5)
Rockford Fosgate RFK-HD9813M5
Complete Amp Install Kit for Select 1998-2013 Harley-DavidsonĀ® Motorcycles
This complete kit includes a heatsink, bracket, hardware and wiring harness needed to install the M5-800X4 amplifier on select 1998-2013 Harley-DavidsonĀ® motorcycles. The cables have been upgraded to provide the necessary current and voltage requirements for the amplifier, and the heat-sink provides extended thermal time under demanding situations. Integrates into factory electrical system without modifications or cutting.
Refer to our COMPATIBILITY chart to verify fitment before purchasing.
Harley-DavidsonĀ® , Road GlideĀ®, Street GlideĀ®, and Electra GlideĀ® are registered trademarks of Harley-Davidson Motor Company. CVOā¢ is a trademark of Harley-Davidson Motor Company. Harom Kardon is a registered trademark of Harman/Kardon International Industries, Inc.
The next step in motorcycle performance, featuring simple plug-and-play installation creates the best in class on-bike audio experience.
Features/Benefits:
Plug-and-Play Design: Designed to work right out of the box. Everything is included to make for easy installation and all to ensure less time in the garage and more time out riding.
Element Readyā¢: Purpose built for the harsh motorcycle environment. The speakers and amplifier are designed to stand up to water, dirt, UV, and motorcycle vibration, ensuring that your audio system will stand the test of time.
Compatibility Chart: Please review below tab for fitment before purchasing.
Key Features
Refer to our COMPATIBILITY chart to verify fitment before purchasing.
Harley-DavidsonĀ® , Road GlideĀ®, Street GlideĀ®, and Electra GlideĀ® are registered trademarks of Harley-Davidson Motor Company. CVOā¢ is a trademark of Harley-Davidson Motor Company. Harom Kardon is a registered trademark of Harman/Kardon International Industries, Inc.
The next step in motorcycle performance, featuring simple plug-and-play installation creates the best in class on-bike audio experience.
Features/Benefits:
Plug-and-Play Design: Designed to work right out of the box. Everything is included to make for easy installation and all to ensure less time in the garage and more time out riding.
Element Readyā¢: Purpose built for the harsh motorcycle environment. The speakers and amplifier are designed to stand up to water, dirt, UV, and motorcycle vibration, ensuring that your audio system will stand the test of time.
Compatibility Chart: Please review below tab for fitment before purchasing.
Key Features
- FULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
- 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
- Plug and Play design for easy installation
- Designed for use with 1998-2013 Harley-DavidsonĀ® Motorcycles
- Y-adaptors included in amp install kit supports expansion of lower fairing, saddlebag, or Tour-PakĀ® speakers
- Designed for use with M5-800X4 amplifier
- Designed for use with TM400X4ad amplifier
- Includes mounting brackets for Bat Wing and Shark Nose fairings
- Includes rear speaker output harness for connection of rear speakers
- Battery PWR/GND Gauge: 8 AWG
- Fuse Type: MAXI
- Fuse Size: 60 Amp
- Amplifier PWR/GND Gauge: 8 AWG
- Speaker Wire Gauge: 16 AWG
- Dual Amp Installation Kit: No
This amplifier installation kit is designed to interface only with the below aftermarket amplifier and Harley-DavidsonĀ® motorcycle. If your existing amplifier and motorcycle are not listed below, it is not compatible.
Kit requires factory Harley-DavidsonĀ® radio to be flashed.
Required Amplifier
| AMPLIFIER MODEL | DESCRIPTION |
|---|---|
| M5-800X4 | Element Readyā¢ IPX6 800 Watt 4-Channel Amplifier |
| TM400X4ad | Power Marine 400 Watt Class-ad 4-Channel Amplifier |
Compatible Harley-DavidsonĀ® Motorcycles
| YEAR | MAKE | MODEL | FAIRING |
|---|---|---|---|
| 2006-2013 | Harley DavidsonĀ® | Street GlideĀ® Ultra | Bat Wing |
| 2006-2013 | Harley DavidsonĀ® | Street GlideĀ® | Bat Wing |
| 1998-2013 | Harley DavidsonĀ® | Electra GlideĀ® | Bat Wing |
| 1998-2013 | Harley DavidsonĀ® | Road GlideĀ® Ultra | Shark Nose |
| 1998-2013 | Harley DavidsonĀ® | Road GlideĀ® | Shark Nose |
Extra Information
Brand:
Rockford Fosgate
Weight:
37.54 LBS
UPC:
199730004027
Bundle:
Yes
Feature 1:
This bundle includes a Rockford Fosgate M5-800X4 4 Channel Element Ready Amplifier, a PMX-HD9813 Media Receiver, a TMS6RG 6ā Full Range Coaxial Speaker, a TMS69BL9813 6x9ā Full Range Coaxial Speaker, and a RFK-HD9813M5 Complete Amp Install Kit.
Feature 2:
Element Readyā¢ design with integrated harness & panel seals
Feature 3:
PRESET feature eliminates the need for setup with Rockford Fosgate UTV audio kits
Feature 4:
Play all day with C.L.E.A.N. clip detection and Constant Power delivery
Feature 5:
Efficient Class-AD technology for more power with less current draw
Condition:
NEW
Weight:
37.5400 lbs
Shipping:
Free 2-Day Shipping!