Description
Wet Sounds Sinister SDX2500 1-Channel 2500 Watt RMS Subwoofer Amplifier
The Sinister SDX 2500 Class D Mono Block Subwoofer Amplifier is the most powerful amplifier Wet Sounds has ever built.
The Sinister SDX 2500 uses the same intelligent microprocessor controlled protection circuitry used on all Sinister SDX amplifiers for overvoltage/undervoltage protection, DC offset & speaker short protection, as well as thermal rollback to ensure consistent play in the harsh marine environment.
As further protection against use in the harsh marine environment, the SDX2500 includes a sealed chassis for the top mounted controls, and a four-layer conformal coated PC Board.
Master/Slave configuration – Allows control of 2 or more SDX2500s from 1 set of controls.Gains, crossovers, bass boosts, subsonic filters, and remote levels can be controlled from a single “Master” SDX2500 amplifier.This eliminates gain/crossover matching normally needed when using multiple amplifiers.
Remote Level Control – Included in all Sinister SDX amplifiers allows control of the total output of the amplifier.The Remote Level Control will never exceed the gain level set on the chassis of the amplifier.
Multi color top mounted LED Badge – All Sinister amplifiers come equipped with the Wet Sounds shield logo badge that can be set to display Red, White or Blue as the status indicator.
Specifications -
Mono @ 4 Ohms - 1000W x 1 @ < 1% THD
Mono @ 2 Ohms - 1700W x 1 @ < 1% THD
Mono @ 1 Ohm - 2500W x1 @ < 1% THD
Frequency Response - 10Hz – 150 Hz
Crossover Range Low Pass - 50Hz – 150Hz 12dB/Octave
Crossover Range Subsonic Filter - 10Hz – 50Hz 12dB/Octave
Bass Boost - 0 - 12dB Variable 30Hz – 125Hz
Input Sensitivity - 0.2V – 6.0V
Dimensions - 22.125” (L) x 10.25” (W) x 3.0” (H)
Fusing - 6 x 40A ATC fuses
Power Ground Input - 1/0 AWG wire capable
The Sinister SDX 2500 Class D Mono Block Subwoofer Amplifier is the most powerful amplifier Wet Sounds has ever built.
The Sinister SDX 2500 uses the same intelligent microprocessor controlled protection circuitry used on all Sinister SDX amplifiers for overvoltage/undervoltage protection, DC offset & speaker short protection, as well as thermal rollback to ensure consistent play in the harsh marine environment.
As further protection against use in the harsh marine environment, the SDX2500 includes a sealed chassis for the top mounted controls, and a four-layer conformal coated PC Board.
Master/Slave configuration – Allows control of 2 or more SDX2500s from 1 set of controls.Gains, crossovers, bass boosts, subsonic filters, and remote levels can be controlled from a single “Master” SDX2500 amplifier.This eliminates gain/crossover matching normally needed when using multiple amplifiers.
Remote Level Control – Included in all Sinister SDX amplifiers allows control of the total output of the amplifier.The Remote Level Control will never exceed the gain level set on the chassis of the amplifier.
Multi color top mounted LED Badge – All Sinister amplifiers come equipped with the Wet Sounds shield logo badge that can be set to display Red, White or Blue as the status indicator.
Specifications -
Mono @ 4 Ohms - 1000W x 1 @ < 1% THD
Mono @ 2 Ohms - 1700W x 1 @ < 1% THD
Mono @ 1 Ohm - 2500W x1 @ < 1% THD
Frequency Response - 10Hz – 150 Hz
Crossover Range Low Pass - 50Hz – 150Hz 12dB/Octave
Crossover Range Subsonic Filter - 10Hz – 50Hz 12dB/Octave
Bass Boost - 0 - 12dB Variable 30Hz – 125Hz
Input Sensitivity - 0.2V – 6.0V
Dimensions - 22.125” (L) x 10.25” (W) x 3.0” (H)
Fusing - 6 x 40A ATC fuses
Power Ground Input - 1/0 AWG wire capable
