Description
The thinPRO10 is the ultimate paradox. There really isn’t anything else like it. With a mounting depth of less than 3”, if it won’t fit in the desired location, you probably aren’t putting a subwoofer there. The dual mirrored NBR spiders and axial force transfer assembly allows for unparalleled performance in a multitude of applications.
The FEA optimized dual gap motor structure features a massive motor with double stacked strontium magnets. This maximizes flux density and control for an impressive 20mm of linear xmax. The honeycomb cone is made of a composite Nomex® and glass fiber, making it incredibly rigid and very lightweight. The 4.5” voice coil, available in 2 or 4 ohm, provides a powerful moving force with 750W RMS power handling.
The thinPRO10 is perfect in both small sealed and ported enclosures. Sealed box sizes range from 0.25-0.8cu ft, with the sweet spot at 0.35cu ft. Ported enclosures range from 0.4-1.0cu ft, with 0.6cu ft recommended for optimum performance.
thinPRO10 Features
750 Watts RMS Power Handling
2.9” Mounting Depth
4.5” Voice Coil
4-Layer Winding on Vented Polymide Composite Former
Protective Grille (TP10G Sold Separately)
Honeycomb Nomex® and Glass Fiber Cone
FEA Optimized Dual-Gap Motor Structure
Double-Roll NBR Surround
Mirrored Internal NBR Spiders
8AWG Push Terminals
Vented Cast Aluminum Frame
Dimensions: 9 1/8in (232mm) Standard 10” cutout
Specifications:
General Specifications:
Nominal Size: 10"
Nominal Impedance: 4 ohm
Power Handling: 750W RMS, 2250W Peak
Recommended Power range: 250W-750W RMS
Frequency Response:
Voice Coil Diameter: 4 1/2" (114 mm)
Electro-Mechanical Parameters:
Fs: 32hz
Vas: 17L (0.6ft^3)
Re: 3.35 Ohms
Le: 4.73 mH
Qms: 4.46
Qes: 0.59
Qts: 0.52
SPL: 82 dB
Sd: 341.76 cm^2 (52.97in^2)
Xmax: 20 mm (0.79")
Xmechp-p: 54 mm (2.13")
The FEA optimized dual gap motor structure features a massive motor with double stacked strontium magnets. This maximizes flux density and control for an impressive 20mm of linear xmax. The honeycomb cone is made of a composite Nomex® and glass fiber, making it incredibly rigid and very lightweight. The 4.5” voice coil, available in 2 or 4 ohm, provides a powerful moving force with 750W RMS power handling.
The thinPRO10 is perfect in both small sealed and ported enclosures. Sealed box sizes range from 0.25-0.8cu ft, with the sweet spot at 0.35cu ft. Ported enclosures range from 0.4-1.0cu ft, with 0.6cu ft recommended for optimum performance.
thinPRO10 Features
750 Watts RMS Power Handling
2.9” Mounting Depth
4.5” Voice Coil
4-Layer Winding on Vented Polymide Composite Former
Protective Grille (TP10G Sold Separately)
Honeycomb Nomex® and Glass Fiber Cone
FEA Optimized Dual-Gap Motor Structure
Double-Roll NBR Surround
Mirrored Internal NBR Spiders
8AWG Push Terminals
Vented Cast Aluminum Frame
Dimensions: 9 1/8in (232mm) Standard 10” cutout
Specifications:
General Specifications:
Nominal Size: 10"
Nominal Impedance: 4 ohm
Power Handling: 750W RMS, 2250W Peak
Recommended Power range: 250W-750W RMS
Frequency Response:
Electro-Mechanical Parameters:
Fs: 32hz
Vas: 17L (0.6ft^3)
Re: 3.35 Ohms
Le: 4.73 mH
Qms: 4.46
Qes: 0.59
Qts: 0.52
SPL: 82 dB
Sd: 341.76 cm^2 (52.97in^2)
Xmax: 20 mm (0.79")
Xmechp-p: 54 mm (2.13")