Description
Included in this kit
This bundle includes 1x Wavtech Link1000.5PLUS 1000 Watt 5-Channel Amplifier, and 1x Wavtech thinPRO12-2 600 Watt 12" Shallow Subwoofer 2 ohm.
1x Wavtech Link1000.5PLUS 1000 Watt 5-Channel Amplifier - (LINK1000.5PLUS)
The link1000.5plus is the perfect complete system amplifier. One of the drawbacks of most 5-channel amplifiers is that while there is usually enough power for the front and rear main speakers, the power left over of the subwoofer is limited. Not so with the link1000.5plus. Channel 5 produces a robust 500 watts RMS @ 2 ohms, enough for most subwoofer systems. Like all Wāvtech amplifiers, the link1000.5mini has built-in adaptive loading and can accept up the 40V of input.
The link1000.5mini features built-in summing for up to 6-channels of input, so you won’t need to purchase an external processor in applications where a full range signal is not present. Like all Wāvtech amplifiers, it is compatible with Start/Stop systems. It also features 12dB per octave crossover on the 4 main channels and Wāvtech’s proprietary bassFREQ preamp with 24dB crossover and subsonic filter on the mono channel. The optional linkRC can be used to control the level of the subwoofer from the front of the vehicle.
link1000.5plus Features
1000 Watt 5-Channel Amplifier
Main Channels
75 watts x 4 @ 4 ohms
125 watts x 4 @ 2 ohms
250 watts x 2 @ 4 ohms BTL
Subwoofer Channel
300 watts x 1 @ 4 ohms
500 watts x 1 @ 2 ohms
Small Footprint: 11.9”x5.5”x1.65”
Variable HP Crossover (-12dB/oct) with 1x/10x CH1/2
Variable HP/BP/LP Crossover (-12dB/oct) CH3/4
Variable Low-Pass Crossover (-24dB/oct) CH5
Variable Subsonic Filter (-24dB/oct) CH5
Adjustable Parametric EQ CH5
Remote Level Control (RLC) w/Optional linkRC
bassFREQ Bass Processor w/Parametic EQ CH5
Active Thermal Management
Start/Stop System Compatible
Adaptive OEM Load Technology
40V Input Capability
Differential Balanced Inputs
Variable Gain Adjustment w/Clip LED
Auto Turn-On via DC-Offset or Audio Signal Detect
Adaptive OEM Load Technology
Locking Detachable Hi-Level Speaker Terminals
Professional Grade Panel Mount RCA’s
Compact Aluminum Chassis w/Detachable Mounting tabs
1x Wavtech thinPRO12-2 600 Watt 12" Shallow Subwoofer 2 ohm - (thinPRO12-2)
The thinPRO12 has a mounting depth of just 3”, so it is really thin, but it does not perform like a shallow subwoofer. Our Patent Pending design allows for some big performance advantages. The dual mirrored NBR spiders and axial force transfer assembly acheive over 2-inches of peak to peak excursion.
The FEA optimized dual gap motor structure features a massive motor with double stacked strontium magnets. This maximizes flux density and control for an impressive 20mm of linear xmax. The honeycomb cone is made of a composite Nomex® and glass fiber, making it incredibly rigid and very lightweight. The 5” voice coil, available in 2 or 4 ohm, provides a powerful moving force with 750W RMS power handling.
thinPRO12 Features
750 Watts RMS Power Handling
3” Mounting Depth
5” Voice Coil
4-Layer Winding on Vented Polymide Composite Former
Protective Grille (TP12G Sold Separately)
Honeycomb Nomex® and Glass Fiber Cone
FEA Optimized Dual-Gap Motor Structure
Double-Roll NBR Surround
Mirrored Internal NBR Spiders
8AWG Push Terminals
Vented Cast Aluminum Frame
Dimensions: 11 1/8in (282mm) Standard 12” cutout
Specifications:
General
Nominal Size: 12"
Nominal Impedence: 2 Ohm
Power Handling: 750W RMS/ 2250W Peak
Recommended Power Range: 250W-750W
Frequency Response:
Electro-Mechnaical Parameters
Fs: 25Hz
Vas: 42L (1.48ft³)
Re: 1.85 Ohms
Le: 2.48mH
QMS: 5.02
Qes: 0.55
Qts: 0.49
SPL/Sensitivity (1W/1m): 83dB
Sd: 510.7 cm² (79.16in²)
Xmax: 20mm (0.79")
Xmechp-p: 54mm (2.13")
Physical Specifications:
Overall diameter with gasket: 13-1/16" (331.5mm)
Mounting depth: 3"
Mounting Hole Diameter: 11-1/8"
Mounting Screw Circle Diameter: 11-13/16"
Front Height trim ring only/w/grille: 15/16"/2-1/8"
Fropnt excursion clearance from cone/from baffle: 1-1/8", 2-1/16"
Rear Clearance from backplate (not required): >/= 1/16" recommended
Driver Displacement, normal mount: Negligible
Driver displacement, reverse mount: add +0.042ft³