Description
Included in this kit
This bundle includes 2x Wavtech thinPRO12-4 600 Watt 12" Shallow Subwoofer 4 ohm, 1x Wavtech link1000.1mini - 1000 Watt Mono Amplifier, and 1x Wavtech linkRC - Remote level control (RLC) for linkDQ.
2x Wavtech thinPRO12-4 600 Watt 12" Shallow Subwoofer 4 ohm - (thinPRO12-4)
The thinPRO12 has a mounting depth of just 3”, so it is really thin, but it does not perform like a shallow subwoofer. Our Patent Pending design allows for some big performance advantages. The dual mirrored NBR spiders and axial force transfer assembly acheive over 2-inches of peak to peak excursion.
The FEA optimized dual gap motor structure features a massive motor with double stacked strontium magnets. This maximizes flux density and control for an impressive 20mm of linear xmax. The honeycomb cone is made of a composite Nomex® and glass fiber, making it incredibly rigid and very lightweight. The 5” voice coil, available in 2 or 4 ohm, provides a powerful moving force with 750W RMS power handling.
thinPRO12 Features
750 Watts RMS Power Handling
3” Mounting Depth
5” Voice Coil
4-Layer Winding on Vented Polymide Composite Former
Protective Grille (TP12G Sold Separately)
Honeycomb Nomex® and Glass Fiber Cone
FEA Optimized Dual-Gap Motor Structure
Double-Roll NBR Surround
Mirrored Internal NBR Spiders
8AWG Push Terminals
Vented Cast Aluminum Frame
Dimensions: 11 1/8in (282mm) Standard 12” cutout
Specifications:
General
Nominal Size: 12"
Nominal Impedence: 4 Ohm
Power Handling: 750W RMS/ 2250W Peak
Recommended Power Range: 250W-750W
Frequency Response:
Electro-Mechnaical Parameters
Fs: 26Hz
Vas: 42L (1.48ft³)
Re: 3.3 Ohms
Le: 3.82mH
QMS: 4.16
Qes: 0.51
Qts: 0.46
SPL/Sensitivity (1W/1m): 84dB
Sd: 510.7 cm² (79.16in²)
Xmax: 20mm (0.79")
Xmechp-p: 54mm (2.13")
Physical Specifications:
Overall diameter with gasket: 13-1/16" (331.5mm)
Mounting depth: 3"
Mounting Hole Diameter: 11-1/8"
Mounting Screw Circle Diameter: 11-13/16"
Front Height trim ring only/w/grille: 15/16"/2-1/8"
Fropnt excursion clearance from cone/from baffle: 1-1/8", 2-1/16"
Rear Clearance from backplate (not required): >/= 1/16" recommended
Driver Displacement, normal mount: Negligible
Driver displacement, reverse mount: add +0.042ft³
1x Wavtech link1000.1mini - 1000 Watt Mono Amplifier - (link1000.1mini)
The link1000.1mini is the most powerful amplifier in the Wāvtech mini series. This amp makes 1000 watts RMS @ 2ohms. The speaker level inputs of the link1000.1mini can handle up to 40V and have our adaptive loading technology, making for easy connection to both factory and aftermarket head units. At 12.2”x4.5”x1.65”, it is easily one of the smallest 1000 watt RMS amplifiers available today.
The link1000.1mini has Wāvtech’s bassFREQ preamp, with a 24dB per octave crossover, an adjustable parametric EQ and a subsonic filter. This provides the fine tuning required to get the most out of any subwoofer system. The optional linkRC remote allows for control of the subwoofer system from the vehicles front seat. The link1000.1mini is also compatible with OEM start/stop systems.
link1000.1mini Features
1000 Watt Mono Amplifier
600 watts x 1 @ 4 ohms
1000 watts x 1 @ 2 ohms
Only 12.2”x4.5”x1.65”
Fully Adjustable Parametric EQ
Variable Low-Pass Crossover (-24dB/oct)
Variable Subsonic Filter (-24dB/oct)
Remote Level Control (RLC) w/Optional linkRC
Start/Stop System Compatible Differential Balanced Inputs
Variable Gain Adjustment w/Clip LED
Auto Turn-On via DC-Offset or Audio Signal Detect
Adaptive OEM Load Detect Technology
Locking Detachable Hi-Level Speaker Terminals
Professional Grade Panel Mount RCA’s
Compact Aluminum Chassis w/Detachable Mounting tabs
link1000.1mini Specifications
Input Sensitivity
SPK: 1-20Vrms, 2-40Vrms
RCA: 0.2V-5Vrms, 0.4V-10Vrms
Max Input Voltage (SPK): 40Vrms
Frequency Response: <10Hz to >500Hz (=0/-3dB)
THD+N: <1% at rated power
S/N: >78dBA (1W, 4Ω)
1x Wavtech linkRC - Remote level control (RLC) for linkDQ - (linkRC)
Remote level control (RLC) for linkDQ
Wired Remote Control -
• Using the LinkRC you can easily adjust the output level of select wavtech line output converters, line drivers, and signal processors.
Mounting Options -
• Standard Installation: The remote mounts using two screws, typically to the underside of the dash.
• Custom Installation: The remote's housing is disassembled and the knob is flush mounted through a custom hole in the dash or console.