Wavtech thinPRO12-2 600 Watt 12" Shallow Subwoofer 2 ohm, Wavtech link500.1mini - 500 Watt Mono Amplifier, and Wavtech linkRC - Remote level control (RLC) for linkDQ

Included in this kit

---

This bundle includes 1x Wavtech linkRC - Remote level control (RLC) for linkDQ, 1x Wavtech thinPRO12-2 600 Watt 12" Shallow Subwoofer 2 ohm, and 1x Wavtech link500.1mini - 500 Watt Mono Amplifier.

1x Wavtech linkRC - Remote level control (RLC) for linkDQ - (linkRC)

Remote level control (RLC) for linkDQ

Wired Remote Control -
• Using the LinkRC you can easily adjust the output level of select wavtech line output converters, line drivers, and signal processors.

Mounting Options -
• Standard Installation: The remote mounts using two screws, typically to the underside of the dash.
• Custom Installation: The remote's housing is disassembled and the knob is flush mounted through a custom hole in the dash or console.

1x Wavtech thinPRO12-2 600 Watt 12" Shallow Subwoofer 2 ohm - (thinPRO12-2)

The thinPRO12 has a mounting depth of just 3”, so it is really thin, but it does not perform like a shallow subwoofer. Our Patent Pending design allows for some big performance advantages. The dual mirrored NBR spiders and axial force transfer assembly acheive over 2-inches of peak to peak excursion.

The FEA optimized dual gap motor structure features a massive motor with double stacked strontium magnets. This maximizes flux density and control for an impressive 20mm of linear xmax. The honeycomb cone is made of a composite Nomex® and glass fiber, making it incredibly rigid and very lightweight. The 5” voice coil, available in 2 or 4 ohm, provides a powerful moving force with 750W RMS power handling.

thinPRO12 Features
750 Watts RMS Power Handling
3” Mounting Depth
5” Voice Coil
4-Layer Winding on Vented Polymide Composite Former
Protective Grille (TP12G Sold Separately)
Honeycomb Nomex® and Glass Fiber Cone
FEA Optimized Dual-Gap Motor Structure
Double-Roll NBR Surround
Mirrored Internal NBR Spiders
8AWG Push Terminals
Vented Cast Aluminum Frame
Dimensions: 11 1/8in (282mm) Standard 12” cutout

Specifications:
General
Nominal Size: 12"
Nominal Impedence: 2 Ohm
Power Handling: 750W RMS/ 2250W Peak
Recommended Power Range: 250W-750W
Frequency Response: Voice Coil Diameter: 127mm (5")

Electro-Mechnaical Parameters
Fs: 25Hz
Vas: 42L (1.48ft³)
Re: 1.85 Ohms
Le: 2.48mH
QMS: 5.02
Qes: 0.55
Qts: 0.49
SPL/Sensitivity (1W/1m): 83dB
Sd: 510.7 cm² (79.16in²)
Xmax: 20mm (0.79")
Xmechp-p: 54mm (2.13")

Physical Specifications:
Overall diameter with gasket: 13-1/16" (331.5mm)
Mounting depth: 3"
Mounting Hole Diameter: 11-1/8"
Mounting Screw Circle Diameter: 11-13/16"
Front Height trim ring only/w/grille: 15/16"/2-1/8"
Fropnt excursion clearance from cone/from baffle: 1-1/8", 2-1/16"
Rear Clearance from backplate (not required): >/= 1/16" recommended
Driver Displacement, normal mount: Negligible
Driver displacement, reverse mount: add +0.042ft³

1x Wavtech link500.1mini - 500 Watt Mono Amplifier - (link500.1mini)

The link500.1mini amplifier was engineered from the ground up to be the best possible option for adding bass to any system. The speaker level input can handle up to 40V and features our adaptive loading technology, while the RCA input accepts up to 10V, making it the perfect solution for both factory and aftermarket head units. The link500.1mini produces 500 watts RMS @ 2ohms, and its incredibly small size means it will fit almost anywhere.

The link500.1mini utilizes Wāvtech’s proprietary bassFREQ preamp. It features a 24dB per octave crossover, adjustable parametric EQ and a subsonic filter, providing the fine tuning required to get the best out of any subwoofer. Like all Wāvtech amplifiers, the link500.1mini is compatible with start/stop systems. The optional linkRC remote provides for even more system control.

link500.1mini Features
500 Watt Mono Amplifier
300 watts x 1 @ 4 ohms
500 watts x 1 @ 2 ohms
Small Footprint Only 9.05”x4.5”x1.65”
Fully Adjustable Parametric EQ
Variable Low-Pass Crossover (-24dB/oct)
Variable Subsonic Filter (-24dB/oct)
Remote Level Control (RLC) w/Optional linkRC
Start/Stop System Compatible
Differential Balanced Inputs
Variable Gain Adjustment w/Clip LED
Auto Turn-On via DC-Offset or Audio Signal Detect
Adaptive OEM Load Technology
Locking Detachable Hi-Level Speaker Terminals
Professional Grade Panel Mount RCA’s
Compact Aluminum Chassis w/Detachable Mounting tabs

link500.1mini Specifications
Input Sensitivity
SPK: 1-20Vrms, 2-40Vrms
RCA: 0.2V-5Vrms, 0.4V-10Vrms
Max Input Voltage (SPK): 40Vrms
Frequency Response: <10Hz to >500Hz (=0/-3dB)
THD+N: <1% at rated power
S/N: >78dBA (1W, 4Ω)