Description
Included in this kit
This bundle includes a Wavtech Link1500.1plus 1500 Watt Mono Amplifier, 2x Wavtech THINPRO10-4 10” Professional Series Shallow 4 Ohm Subwoofer, and a Wavtech link500.4mini - 500 Watt 4-Channel Amplifier.
1x Wavtech Link1500.1plus 1500 Watt Mono Amplifier - (Link1500.1plus)
The link1500.1plus is the result of extensive engineering and development. The goal was an amplifier with the same power output at either 2 or 1 ohm. This amp makes 1500 watts RMS @ 2 or 1 ohm. This is achieved with our new dual rail voltage power supply. When setting up the amp, simply select the impedance of your subwoofer with the 4/2 or 1 ohm switch and the amp does the rest. At 13.11”x6.5”x1.65”, it is incredible small for a 1500 watt RMS amp.
The link1500.1plus features our bassFREQ preamp, with a 24dB per octave crossover, an adjustable parametric EQ and a 24dB per octave subsonic filter. Like all Wāvtech amplifiers, the speaker level inputs of the link1500.1plus can handle up to 40V and have our adaptive loading technology. The optional linkRC remote allows for control of the subwoofer system from the vehicles front seat. The link1500.1plus is also compatible with OEM start/stop systems.
link1500.1plus Features
1500 Watt Mono Amplifier
900 watts x 1 @ 4 ohms
1500 watts x 1 @ 2 ohms
1500 watts x 1 @ 1 ohm
Only 13.11”x6.5”x1.65”
Dual Rail Voltage Power Supply
Fully Adjustable Parametric EQ
Variable Low-Pass Crossover (-24dB/oct)
Variable Subsonic Filter (-24dB/oct)
Remote Level Control (RLC) w/Optional linkRC
bassFREQ Bass Processor w/Parametic EQ
Active Thermal Management
Start/Stop System Compatible
Adaptive OEM Load Technology
40V Input Capability
Differential Balanced Inputs
Variable Gain Adjustment w/Clip LED
Auto Turn-On via DC-Offset or Audio Signal Detect
Locking Detachable Hi-Level Speaker Terminals
0 Gauge Power/Ground Terminals
Professional Grade Panel Mount RCA’s
Compact Aluminum Chassis w/Detachable Mounting tabs
link1500.1plus Specifications
Input Sensitivity: SPK: 1-20Vrms, 2-40Vrms, RCA: 0.2V-5Vrms, 0.4V-10Vrms
Max Input Voltage (SPK): 40Vrms
Frequency Response: <10Hz to >500Hz (=0/-3dB)
THD+N: <1% at rated power
S/N: >77dBA (1W, 4Ω)
2x Wavtech THINPRO10-4 10” Professional Series Shallow 4 Ohm Subwoofer - (Thinpro10-4)
The thinPRO10 is the ultimate paradox. There really isn’t anything else like it. With a mounting depth of less than 3”, if it won’t fit in the desired location, you probably aren’t putting a subwoofer there. The dual mirrored NBR spiders and axial force transfer assembly allows for unparalleled performance in a multitude of applications.
The FEA optimized dual gap motor structure features a massive motor with double stacked strontium magnets. This maximizes flux density and control for an impressive 20mm of linear xmax. The honeycomb cone is made of a composite Nomex® and glass fiber, making it incredibly rigid and very lightweight. The 4.5” voice coil, available in 2 or 4 ohm, provides a powerful moving force with 750W RMS power handling.
The thinPRO10 is perfect in both small sealed and ported enclosures. Sealed box sizes range from 0.25-0.8cu ft, with the sweet spot at 0.35cu ft. Ported enclosures range from 0.4-1.0cu ft, with 0.6cu ft recommended for optimum performance.
thinPRO10 Features
750 Watts RMS Power Handling
2.9” Mounting Depth
4.5” Voice Coil
4-Layer Winding on Vented Polymide Composite Former
Protective Grille (TP10G Sold Separately)
Honeycomb Nomex® and Glass Fiber Cone
FEA Optimized Dual-Gap Motor Structure
Double-Roll NBR Surround
Mirrored Internal NBR Spiders
8AWG Push Terminals
Vented Cast Aluminum Frame
Dimensions: 9 1/8in (232mm) Standard 10” cutout
Specifications:
General Specifications:
Nominal Size: 10"
Nominal Impedance: 4 ohm
Power Handling: 750W RMS, 2250W Peak
Recommended Power range: 250W-750W RMS
Frequency Response:
Electro-Mechanical Parameters:
Fs: 32hz
Vas: 17L (0.6ft^3)
Re: 3.35 Ohms
Le: 4.73 mH
Qms: 4.46
Qes: 0.59
Qts: 0.52
SPL: 82 dB
Sd: 341.76 cm^2 (52.97in^2)
Xmax: 20 mm (0.79")
Xmechp-p: 54 mm (2.13")
1x Wavtech link500.4mini - 500 Watt 4-Channel Amplifier - (link500.4mini)
A pair of new front speakers and a subwoofer is one of the most common aftermarket audio upgrades. The link500.4mini is the perfect amplifier for this application. When used in 3-channel mode, the amplifier can produce 125 watts x 2 for the main speakers and 250 watts x 1 for the subwoofer, so it won’t lack for power. Speaking of the subwoofer, channels 3/4 have a 1-band PEQ, a subsonic filter and the ability to add an RLC to fine tune the subwoofers performance.
The link500.4mini has our new adaptive loading technology plus the ability to handle up to 40V of hi-level input. It also has fully adjustable high and low pass crossovers. For factory audio systems where no full-range signal is present, the link500.4mini has built-in summing, so it can handle that internally, without the need for an outboard processor. Like all Wāvtech amplifiers, the link500.4mini is start/stop system compatible.
link500.4mini Features
500 Watt 4-Channel Amplifier
75 watts x 4 @ 4 ohms
125 watts x 4 @ 2 ohms
250 watts x 2 @ 4 ohms BTL
Small Footprint Only 9”x4.5”x1.65”
Adjustable Paragraphic EQ (Channels 3/4)
Variable Subsonic Filter (Channels 3/4)
Variable Hi/Low Pass Crossover (-12dB/oct)
Remote Level Control (RLC) w/Optional linkRC (CH 3/4)
Built-In Summing w/Level Trim Adjsutment
Start/Stop Sytem Compatiable
Differential Balanced Inputs
Variable Gain Adjustment w/Clip LED
Auto Turn-On via DC-Offset or Audio Signal Detect
Adaptive OEM Load Technology
Locking Detachable Hi-Level Speaker Terminals
Professional Grade Panel Mount RCA’s
Compact Aluminum Chassis w/Detachable Mounting tabs
link500.4mini Specifications
Input Sensitivity
SPK: 1-20Vrms, 2-40Vrms
RCA: 0.2V-5Vrms, 0.4V-10Vrms
Max Input Voltage (SPK): 40Vrms
Frequency Response: <10Hz to >43kHz (+0/-3dB)
THD+N: <1% at rated power
S/N: >78dBA (1W, 4Ω)