Alpine i509-WRA-JK 9" Multimedia Receiver w/ SPV-10TW-WRA w/ Power Pack & SPV-65X-WRA Speakers Compatible with 2011-2018 Wrangler JK

Included in this kit

---

This bundle includes 1x Alpine SPV-10TW-WRA Weather-Resistant 1” Component Tweeters for 2007+ Wrangler JK/JL & Gladiator JT, 1x Alpine i509-WRA-JK 9-Inch Multimedia Receiver Compatible with 2011-2018 Jeep® Wrangler JK, 1x Alpine SPV-65X-WRA 2-Way Weather Resistant Speaker System for 2007-2018 Jeep® Wrangler JK, and 1x Alpine KTA-450 4-Channel Power Pack Amplifier with Dynamic Peak Power 45W RMS x 4, At 2 Or 4 Ohms.

1x Alpine SPV-10TW-WRA Weather-Resistant 1” Component Tweeters for 2007+ Wrangler JK/JL & Gladiator JT - (SPV-10TW-WRA)

Whether you’re driving with the top on or off, the SPV-10TW-WRA captures the high frequencies so you can experience music detail even over the wind and traffic noise. Plus, the weather-resistant tweeters ensure an uninterrupted music experience no matter the driving conditions. The SPV-10TW-WRA utilizes the factory speaker locations on the 2007 – Up Jeep® Wrangler and Jeep® Gladiator and includes vehicle-specific harnesses and connectors for a true plug-and-play installation experience.

Weather-Resistant 1” Component Tweeters
Teteron Dome Tweeter
Plug-and-Play Installation: Utilizes Factory Locations and Vehicle-specific Harnesses/Connectors
Crossover with two tweeter level output options: 0dB (flat) for “Tombstone” on-axis applications and +3dB for in-dash off-axis applications
Compatible with 2007 – Up Jeep® Wrangler and Jeep® Gladiator

What's in the Box:
(2) 1” Component Tweeters
(2) OEM-fit Mounting Adapters
(2) In-line Crossover Networks w/ OEM connectors for Plug ‘n Play Installation
(2) Alpine logo badges for Tweeter Grilles
Owner’s Manual

Specifications:
Power Handling: 75W RMS / 225W Peak
Frequency Response: 2kHz - 22kHz
Nominal Impedance: 4Ω
Diaphragm: 1”

1x Alpine i509-WRA-JK 9-Inch Multimedia Receiver Compatible with 2011-2018 Jeep® Wrangler JK - (i509-WRA-JK)

Alpine i509-WRA-JK 9-Inch Multimedia Receiver Compatible with 2011-2018 Jeep® Wrangler JK
• 9” WXGA High-Resolution Anti-Glare Display (1280x720px)
• Bluetooth® built-in for hands-free calling and audio streaming
• SiriusXM-Ready®/ SiriusXM NGS-Ready® (SXV300 Connect Vehicle Tuner Kit sold separately; SiriusXM subscription required)
• HDMI Input and Output
• Aux Input
• Dual USB Input
• iDatalink® Maestro Connectivity
• DVR-C320R Alpine Dash Camera Compatible (camera sold separately)
• Media Xpander®
• Navigation Compatible with the KTX-NS01 Navigation Module (sold separately)
• MP3/WMA/AAC/FLAC/APE music playback via USB
• Jeep®-specific trim bezel
• H.264/MPEG-4 AVC/MP4/MOV/FLV/MKV video playback via USB
• JPG/PNG/BMP USB photo viewer
• Front/Rear camera input with distance guide display
• KCX-C2600B Universal Front and Rear Camera Selector ready
• Steering wheel remote control ready
• External microphone included
• Built-in amplifier (16-watts RMS/50 peak x 4 channels)
• 3 preouts (True 4V)
• 5-band graphic EQ or 13-band parametric EQ (perchannel)
• 6-channel time correction
• Plug-and-Play installation
• 24-bit DAC
• High pass crossover/low pass crossover: Front/Rear/Subwoofer
• CTA-2006 compliant
• Jeep®-specific opening screen and LED color scheme
• Weather-Resistant (rated IP53 for dust and ingress)
• Jeep®-specific tuning
• Hi-Res Audio Playback
• Works with Apple CarPlay®(wireless and wired)
• The Google Assistant is available on Android Auto™ (wireless and wired)

1x Alpine SPV-65X-WRA 2-Way Weather Resistant Speaker System for 2007-2018 Jeep® Wrangler JK - (SPV-65X-WRA)

The SPV-65X-WRA is a complete speaker system upgrade that is Alpine engineered for the 2007-2018 Jeep Wrangler JK

FEATURES
6.5-inch speakers which can be installed as a component or coaxial system, using the included adapters
CTA-2031 Power Rating: 75W RMS, 225W Peak
Nominal impedance 4 Ohm
Frequency response 65-22kHz
1” Teteron dome tweeter
Steel frame with factory speaker mounting tabs
Weather resistant: IP55
Includes vehicle specific speaker connectors

Speaker Rating:
Max RMS Power Capacity: 75W
Peak Power Capacity: 225W

SOUND THAT’S OPTIMIZED FOR THE JK
These 6.5-inch speakers in the SPV-65X-WRA are tuned specifically for the JK’s in-cabin environment and fit into the factory speaker locations for an easy update that will impress your ears.

SPEAKERS BUILT FOR YOUR 2007-2018 JK
The SPV-65X-WRA comes with adapters that allow the speakers to be installed as a component set by mounting the tweeters into the tombstones of older JKs or onto the dash for newer JKs. For older JKs that have a sound bar, the adapters convert the speakers into a coaxial design so they can be installed into the sound bar.

WEATHER RESISTANT
Driving with the top off is part of the fun of owning a Wrangler, but sometimes you get caught off-guard with the top down and inclement weather. The SPV-65X-WRA is weather resistant and rated IP55, so it’s protected from limited dust ingress and low-pressure water spray from any direction.

1x Alpine KTA-450 4-Channel Power Pack Amplifier with Dynamic Peak Power 45W RMS x 4, At 2 Or 4 Ohms - (KTA-450)

Alpine KTA-450 4-Channel Power Pack Amplifier with PowerStack Capability

The next generation of Power Pack is here! The compact KTA-450 Power Pack Amplifier utilizes Alpine’s exclusive DPP technology for a big power boost in a small space.

The KTA-450 measures just 7” W x 3.5” H x 1.25” D. For vehicles that do not have the space for a traditional amplifier, the KTA-450’s small size allows it to be tucked away in hidden areas such as in the glove box or behind the radio. It could even be used in a motorcycle’s saddlebag or on a boat.

No Extra Wires! Thanks to the efficient power needs of the DPP technology, the KTA-450 does not require a new power supply wire at the battery, so installation is fast using the supplied radio power wires. In addition, the KTA-450 uses a 22-pin power harness with a recessed design on one side, so the cables can be tucked-in for a cleaner, less-bulky installation.

Features:
• Compact size, measuring just 7” W x 3.5” H x 1.25” D
• Class D amplifier circuit
• Dynamic Peak Power (DPP) technology doubles the power during dynamic musical passages
• Power Stacking bracket included for mounting to the iLX-W650 7” Mech-less AV Receiver (sold separately)
Specifications:
• Power output 4-Ohm @ 14.4 Volts: 50 W RMS X 4
• Power output 2-Ohm @ 14.4 Volts: 45 W RMS X 4
• Dynamic Peak Power output 4-Ohm @ 14.4 Volts: 100 W RMS X 4
• Dynamic Peak Power output 2-Ohm @ 14.4 Volts: 100 W RMS X 4
• THD 10 W into 4 Ohms: Less Than 0.2%
• THD 10 W into 2 Ohms: Less Than 0.1%
• THD Rated Power 4 Ohms: Less Than 0.1%
• THD Rated Power 2 Ohms: Less Than 0.1%
• S/N Ratio: 1 W into 4 Ohms: >85dB
• Frequency Response:+0/-3 dB 15Hz - 50kHz
• Input Sensitivity: RCA (0.152 - 2.80V), Speaker (0.33 - 6.05V)
• Crossover: Variable HPF/LPF, (OFF/60/80/120Hz)
• Weight: 1.3lb

In the box:
• KTA-450 4-Channel Amplifier
• Input/Output/Power Wire Harness
• Universal Bracket Set
• Cable Tie
• Self Tapping Screw
• W650 Mounting Brackets