Cicada Audio CX250.2D - 2 X 250 @ 2 Ohm Amplifier with Plug-n-Play Integration into a 24+ H.D. Skyline system

Included in this kit

---

This bundle includes a Nav-TV NTV-KIT1021 ZEN-H | Harley-Davidson A2B Audio Interface, a Memphis Audio ETP-3 3-Foot 2 -Channel Audio Interconnect Cables, and a Cicada Audio CX250.2D - 2 X 250 @ 2 Ohm Amplifier.

1x Nav-TV NTV-KIT1021 ZEN-H | Harley-Davidson A2B Audio Interface - (NTV-KIT1021)

NAV-TV’s ZEN-H processor seamlessly allows aftermarket amplifiers to be added to the factory Harley-Davidson headunit via its low level (8 channel) analog RCAs @5V RMS. This plug & play kit integrates with various OEM data networks to retain chimes, volume control, fader/balance, and EQ Presets (for true OEM integration).

Tech Specs:
- 24 Bit 48khz Output
- 8 x 5v RMS RCA outputs
- 113db SNR
- Burr Brown DAC
- 7 - 20v input voltage range
- <250mA idle current draw

Model
2024-2025 Harley Davidson/CVO
2024-2025 Harley Davidson/Road Glide
2024-2025 Harley Davidson/Street Glide

ZEN-H Technical Specifications
Hardware & Software
Current HW version: --1r1--
Current SW version: ZEN-H-1.2.8.ntv
Compatible SW (update) OS: Windows, macOS

INPUT
Digital Input A2B

OUTPUT
Digital Outputs: None
Digital Outputs supported: 24bit/48kHz
Frequency Response (digital): 18Hz – 24kHz
Analog Outputs: 8 channels (RCA)
Output Voltage Peak: 13.8v
Output Voltage RMS: 5v
Analog Output Type: Single-Ended
S/N Ratio (analog): 113dB
Frequency Response (analog): 18Hz – 24kHz
THD+N @ -1dBFS -94dB
DAC 192kHz 24bit
DSP 32bit Fixed Point

Power Supply
Current Consumption Stand-by <1 mA
Current Consumption Operational 250 mA MAX
Operational Voltage 7V – 20V DC
Amp Turn-On Output Automatic
Amp Turn-On Voltage V-batt
Amp Turn-On Current Limitation 500mA

Other
Dimensions: 4”x4”x1 1/2”
Weight: 5 oz'

1x Memphis Audio ETP-3 3-Foot 2 -Channel Audio Interconnect Cables - (ETP-3)

ETP RCA connections provide a sound connection for all of your audio equipment. These connectors feature molded color matched ends, flexible PVC jacket and twisted pair wires for noise rejection. Your system performance relies heavily on the connections you use. Don’t sacrifice your vehicles audio quality, use only the best connection available from Memphis Audio.

Molded color matched ends
Clear flexible PVC jacket
Twisted pair design for excellent noise rejection
End 1: 2 Male RCA
End 2: 2 Male RCA
CHANNELS: 2
LENGTH: 3ft

1x Cicada Audio CX250.2D - 2 X 250 @ 2 Ohm Amplifier - (CX250.2D)

POWER SUPPLY
Voltage: 8 - 16 VDC
Idling current: 1.32 A
Switched off: <2 mA
Consumption @ 14.4 VDC 2Ω Max Musical Power (without CPL): 30 A
Remote IN 7 ÷ 15 VDC (1 mA)
Fuse 30 A
DC Offset (Senses DC offset for Turn on/off) Hi-Level Input (speaker)
VOX (Signal Sensing Turn on/off) Hi or Lo Level Input (speaker/RCA)
REM (Switched 12V on/off) Switched 12V turns the amplifier on

AMPLIFIER STAGE
Distortion - THD @ 1 kHz, 4 Ω, 90% Output Power: 0.10 %
Bandwidth @ -3 dB, 2 V RMS, 4Ω: 10 ÷ 20k Hz
S/N ratio @ A weighted, 2V, Output Power: 91 dBA
Damping factor @ 1 kHz, 2 V RMS, 4Ω: >200
Input sensitivity: 1 - 15 V RMS
Input impedance: 15k Ω
LOAD IMPEDANCE (MIN):
• 2 Ch: 1-2 2Ω
• 1 Ch: Bridge (1-2) 4Ω
MAX POWER 500 W
OUTPUT POWER (RMS) @ 12.5 VDC, 1% THD:
• 2 Ch @ 4Ω: 132 W x 2
• 2 Ch @ 2Ω: 218 W x 2
• 1 Ch - (Bridge 1/2) @ 4Ω: 435 W x 2
OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
• 2 Ch @ 4Ω: 150 W x 2
• 2 Ch @ 2Ω: 250 W x 2
• 1 Ch - (Bridge 1/2) @ 4Ω: 500 W x 1

SIGNAL CONNECTIONS
Input Stage: 2 channels in Both High and Low Input
Input Voltage Range: 0.2 Vac - 15Vac

CEA SPECIFICATIONS
Output power @ 4Ω, ⩽1% THD+N, 14.4 V: 150 W x 2
SN ratio (ref. 1 W output): 75 dBA

POWER OUTPUT STEREO / 4 CHANNEL
• 2 X 150 WRMS into 4 ohms @ 14.4 Vdc
• 2 X 250 WRMS into 2 ohms @ 14.4 Vdc
BRIDGED MONO - 1 CHANNEL
• 1 X 500 WRMS into 4 ohms @ 14.4 Vdc
• Frequency Response - 20-20,000 +/- 3dB THD < 0.5%
• THD + N (10% Rated Power): 0.1%
• Product Dimensions (Inches / Millimeters): 7.6 x 4.0 x 1.4 in / 193 x 103 x 36 mm
• Weight (kg/lb): 1.36 / 2.99