Description
Included in this kit
This bundle includes a JL Audio MBT-CRXv3: Weatherproof BluetoothĀ® Controller / Receiver, and a JL Audio MX280/4 4 Channel 280 watt, Marine/Power Sports grade amplifier.
1x JL Audio MBT-CRXv3: Weatherproof BluetoothĀ® Controller / Receiver - (MBT-CRXv3)
Water-resistant Audio Controller and Receiver with BluetoothĀ® Wireless Technology
Engineered for marine, motorsports and outdoor applications, the MBT-CRXv3 wireless receiver is designed to deliver top-quality streaming audio to almost any sound system over land or water.
Housed in a compact and water-resistant chassis (IP67-rated), this premium audio receiver is well suited for small watercraft, motorcycles, golf carts and utility vehicles. Needing just a single hole for installation, the MBT-CRXv3 wireless receiver can function as a stand-alone, wireless audio source unit or as an add-on, wireless audio controller and receiver. Large backlit controls permit easy operation day or night, and an adaptor plate is included for front-mount applications or where rear access is limited.
Outfitted with BLUETOOTH wireless technology and the QualcommĀ® aptXā¢ HD audio codec, MBT-CRXv3 delivers dynamic, CD-like sound from your compatible streaming device from up to 35ā (11 meters) away. Two sets of stereo preamp outputs (4-volt RMS) are on hand to feed two main audio zones plus a dedicated subwoofer output. Independent audio zone level controls with LED color indicators ensure effortless command of your sound system while your streaming device is tucked away.
The receiver includes +12-volt (1 amp) remote turn-on output for amplifier control.
General Specifications
BluetoothĀ® Core Specification Version 5.0 with QualcommĀ® aptXā¢-HD audio
Current Draw 83 mA (at idle) / 108 mA (at full output)
Input Operating Voltage 8 - 16 VDC
Fuse Rating 2A Mini ATC
Output Voltage 4V RMS
Frequency Response 20 Hz - 20 kHz (Ā±1dB)
Connection Range* Up to 35 ft / 11 m
S/N Ratio 101 dB (20 Hz - 20 kHz)
Remote Turn-on Output Capacity 350 mA (max)
BluetoothĀ® Profile A2DP (High-Quality, Stereo Audio)
Outputs Two Stereo Pairs Per Zone, Plus One Mono Subwoofer (RCA Plugs)
Physical Specifications
Width (W) 2.15 in / 55 mm
Height (H) 2.15 in / 55 mm
Depth (D) 0.74 in / 19 mm
Mounting Depth (A) 2.36 in / 60 mm
Mounting Hole Diameter 1.125 in / 29 mm (minimum diameter for mounting with rear of panel access)
1.875 in / 48 mm (maximum for front mounting with plate)
1x JL Audio MX280/4 4 Channel 280 watt, Marine/Power Sports grade amplifier - (MX280/4)
JL Audio MX280/4
Engineered specifically for powersports applications, the 4-channel MX280/4 amplifier employs our high-speed NexDā¢ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX6 water-resistance rating, making it perfect for motorcycles, ATVās or other utility vehicles.
Generating a solid 50W x 4 into 4 ohms (14.4V, 1% THD), the MX280/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 140W x 2 into 4 ohms.
Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ī© | 50 W RMS x 4 |
| @ 2 Ī© | 70 W RMS x 4 |
| Bridged @ 4Ī© | 140 W RMS x 2 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ī© | 36 W RMS x 4 |
| @ 2 Ī© | 52 W RMS x 4 |
| Bridged @ 4Ī© | 100 W RMS x 2 |
General Specifications
| Frequency Response | 20 Hz - 20 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >89.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >60 / 50 Hz |
| Damping Factor @ 2 Ī© | >30 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) |
| Min.Copper Power / Ground Wire Gauge | 8 AWG wire |
| Fuse Rating | 35 A (AFS, AGU or MaxiFuseā¢) |
Signal Processing
| Filter Mode(s) | Low-Pass or High-Pass |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 35 Hz - 300 Hz |
| Detented, Calibrated Filter Freq. Potentiometers | Yes |
| Filter Defeat Function | Yes |
| Remote Level Control | No |
| Remote Level Modes | N/A |
| Channel Input Mode Switch | Yes (2/3/4 ch.) |
| Pass-Through Preamp Output | None |
| Source Channel Selection for PreOuts | N/A |
Physical Specifications
| Height (H) | 1.77 in / 45 mm |
| Width (W) | 8.66 in / 220 mm |
| Depth (D) | 3.09 in / 78.5 mm |
| Net Weight | 3.18 lb / 1.44 kg |