Description
Included in this kit
This bundle includes 1x Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp, and 1x Kicker 50VCWC124 CompC 12-inch Subwoofer in Vented Enclosure, 4-Ohm.
1x Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp - (46CXA4001)
Kicker 46CXA4001 CX400.1 400 Watt RMS 1-Ohm Stable Mono Amplifier
Using a Class-D power plant, the CXA400.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 400 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look
Specifications:
• MODEL - CXA400.1
• Power (watts/ch) 4 Ohm - 150x1
• Power (watts/ch) 2 Ohm - 300x1
• Power (watts/ch) 1 Ohm - 400x1
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 8-1/8, 20.6
• Frequency Response (Hz): - 25-200, +0/-1dB
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - >95dB, a-weighted, re: rated power
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz
1x Kicker 50VCWC124 CompC 12-inch Subwoofer in Vented Enclosure, 4-Ohm - (50VCWC124)
12" 4-Ohm CompC Loaded Subwoofer Enclosure
Signature Stitches - Kicker's signature yellow stitching creates a superior bond between the tough, ribbed polyurethane surround and polypropylene cone for the best in reliability.
Poly Perfection - CompC subwoofers have a lightweight, injection-molded polypropylene cone to eliminate flex and distortion. You get a deep, accurate sound no matter how hard you push it.
Stay Cool - Perimeter venting slots allow air to constantly circulate around the motor to maintain the perfect operating temperature.
Your setup. Your way. - Single and dual-voice-coil four-ohm options let you get the most out of your amp.
Make It Bump - This KICKER sub delivers serious bass! Use a CX amplifier for the perfect marriage of power and performance.
Forced Air Cooling -
As the woofer's cone moves downward, hot air around the voice coil is forced out of the woofer. As the woofer's cone moves upward, cool outside air is drawn into the woofer cooling the voice coil.
The CompC 12-Inch Subwoofer Enclosure comes loaded with a single 4-Ohm terminal.
Features:
• Uses Very Little Trunk Space
• Genuine CompC Subwoofer
• Custom Port Design
• Made Of Heavy MDF
• Spring Loaded Speaker Terminal
• Thick Black Carpet Protects the Enclosure
• Embroidered KICKER Logo
• Works Perfectly with CXA400.1 (Sold separately)
Specifications:
• Subwoofer (in, cm) - 12, 30
• Impedance (Ohms) - 4
• Recommended Amplifier Power (watts RMS) - 300
• Peak Power (watts, per ANSI/CTA-2031-A) - 600
• Sensitivity (dB 1w/1m) - 95.3
• Tuning Frequency [Hz] - 30
• Box Top Depth (in, cm) - 11-3/8, 28.9
• Box Bottom Depth (in, cm) - 14-1/2, 36.7
• Box Height (in, cm) - 16, 40.6
• Box Width (in, cm) - 20, 50.8
