Description
Included in this kit
This bundle includes a MTX Audio S6512-44 S65-Series Square 12" 500W RMS Dual 4-Ohm Subwoofer, a MTX Audio JH10001 Jackhammer Series 1100W x 1 @ 1-Ohm Class D Mono Block Amplifier, and a MTX Audio BS112V-SQ Bass Slammer 12" Subwoofer Enclosure.
1x MTX Audio S6512-44 S65-Series Square 12" 500W RMS Dual 4-Ohm Subwoofer - (S6512-44)
MTX S6512-44
12" 500 Watt RMS Dual 4-Ohm Square Car Audio Subwoofer
SPECIFICATIONS:
• Recommended Amp Power (RMS): 250 - 500
• Frequency Response: 23Hz - 130Hz
• Sensitivity: 86.7dB (1W/1m)
• Impedance: Dual 4Ω
• Volume Displacement (cu in): 68.47
• Voice Coil: 2" (5.08 cm)
• Mounting Depth: 6.9375" (17.62cm)
• Cut Out Diameter: 11.125" (28.26cm)
Patented Technology
The surround geometry on the S65 Series, protected by US patent #7,275,620, increases the effective Xmax of the subwoofer, resulting in higher SPL and volume displacement, which translates to more dB that comparable subwoofers from other manufacturers. This patented design makes the S65 the loudest 500-watt square subwoofer in the market today.
Cool Under Pressure
Spider Plateau Venting is a mechanical cooling process that circulates hot air for cool air at the voice coil as the subwoofer continuously cycles. The constant movement of hot air out and cooler air in, targeted directly at the 2.0" high temperature voice coil increases reliability and longetivity.
Radial Ribbed T-Yoke
The specially designed backplate on the S65 Series not only gives it an impressive stance, but acts as an additional medium to conduct heat away from the voice coil. The increased surface area of the backplate dissipates additional heat ensuring the S65 subwoofer plays with lower distortion for extended periods.
1x MTX Audio JH10001 Jackhammer Series 1100W x 1 @ 1-Ohm Class D Mono Block Amplifier - (JH10001)
MTX JH10001
Jackhammer Series 1000 Watt Monoblock Subwoofer Amplifier
Easy Access Controls
Accessing the fully adjustable gain, low pass filter, subsonic filter and bass boost from the front panel allows for easy adjustment after the unit is installed. This layout is simple and elegant, giving the JH10001 a sophisticated look with the convenience of easy accessibility.
Only What You Need
The JH10001 is designed for one thing, bringing the power to whatever subwoofers you hook it up to. The input section features high quality RCAs for easy connection to after market head units or processors. The Input Level selection is either Pre or Spk In so it can also be used with factory radios that don't have RCA outputs. The Auto Turn On feature is selectable, enabling the unit to turn on when it senses signal, eliminating the need to run a remote wire, or it can be turned on using a remote wire, the choice is yours.
High Quality Power and Speaker Connections
The JH10001 can accept up to a standard 1/0-gauge power and ground wire for optimal performance. The speaker terminals can accept up to 12-gauge speaker. The speaker connection terminal has two sets of positive and negative terminals for easy wiring, the JH10001 can play loads down to 1Ω. Both sets of connectors use set screw style fittings that ensure proper connection and continual signal transfer.
FEATURES • Variable Subsonic Filter
• Top Mount Controls
• Variable Crossovers
• Selectable Turn On Input
• Selectable Input Signal
• Remote Bass Knob
SPECIFICATIONS • Description: Mono Block
• Topology: Class D
• 4Ω RMS Power Output: 450W x 1 Channel
• 2Ω RMS Power Output: 775W x 1 Channel
• 1Ω RMS Power Output: 1100W x 1 Channel
• THD: Less Than 1%
• Signal to Noise Ratio: 68dB
• Frequency Response: 20Hz - 250Hz
• Crossover: 40Hz to 250Hz, 12dB/Oct
• Subsonic Filter: 20Hz to 50Hz, 12dB/Oct
• Bass Boost: 0 - 12dB @ 45Hz
• Maximum Input Signal: 10V
• Height: 2.57" (65.2mm)
• Width: 7.61" (193.4mm)
• Depth: 12.24" (311mm)
1x MTX Audio BS112V-SQ Bass Slammer 12" Subwoofer Enclosure - (BS112V-SQ)
The Bass Slammer BS112V-SQ 12" square sub box was built with a famous type of subwoofer in mind, the powerful square subwoofer! The BS112V-SQ works perfectly with any square subwoofer, but specifically the Kicker L5 or L7 version of the Solo-Baric or the MTX Thunder Square woofers. This is our recommended choice for a quality constructed box. This enclosure is engineered to offer the highest in durability and sound. It utilizes premium wood along with the most sophisticated and efficient manufacturing processes to be the best quality and value in the industry. Another great quality of this box is it is made in the USA, while inferior brands are imported from China and use a cheaper wood and less quality craftsmanship.
Features -
• Dark Gray Aviation Grade Carpeting
• Strong High Density Wood Construction
• Spring Loaded Speaker Terminal
• Internal Airspace: 3.0 cubic ft.
• Specifically designed to fit the L5 or L7 Series and the Thunder Square Subwoofers
• Dimensions: 15-1/4"H x 20-1/4"W x 15-1/4"D
• 1-year Manufacturer's warranty (seals and finish only