Description
Included in this kit
This bundle includes an ARC Audio MPAK-14HD Motorcycle HD Horn Speaker Kit - Fits 2014+ HD Street Glide and Road Glide Motorcycles, an ARC Audio MOTO-800 4 Channel 800 Watt Motorcycle Amplifier, an Arc Audio HD-Power - 8-Gauge OFC Amplifier Wiring Kit compatible with Harley Davidson, an ARC PSM-PRO 6 Ch-in / 8 Ch-out Compact Stand-Alone DSP w/ Idata Maestro "AR" Compatibility., an Arc Audio Moto602-HD Horn Loaded Compression Coaxial Powersport & Motorcycle Speakers, an ARC Audio MOTO CX69 High Performance 6x9" Motorcycle Speakers, Pair, and 8x Memphis Audio ETP-3 3-Foot 2 -Channel Audio Interconnect Cables.
1x ARC Audio MPAK-14HD Motorcycle HD Horn Speaker Kit - Fits 2014+ HD Street Glide and Road Glide Motorcycles (MPAK-14HD)
This MPAK kit includes the following products: MOTO720.4 Amplifier, a pair of MOTO-602-HD Compression Horn Speakers, a HD-FH2014 Wiring Harness Kit, and a RG15 Amplifier Mounting Kit
As the MPAK14 is a full kit, it includes speakers that bolt into the factory location and work with the enclosures in the fairing. Likewise, the kit includes dedicated power wiring to ensure efficient current delivery to the amp. Finally, the signal wiring uses OEM-compatible connectors to extract a signal from the factory radio and feed it to the DSP or MOTO720 amp. Not a single wire needs to be cut, tapped, or modified in any way, so your warranty remains unquestionably intact while you can enjoy your music the way it was supposed to be enjoyed – loud!
• Designed for use with 2014 and up Harley Street Glide and Road Glide Motorcycles
• Includes all components necessary for both Street Glide and Road Glide Applications
• Motorcycles that already have Boom II/III kits may require additional components, parts and/or labor to complete the installation properly
• Designed and tested by factory trained technicians at Mitchell's Modesto Harley.
• MPAK kits are designed to fit directly into your HD Motorcycle's factory locations in the front fairing.
• No loss of space inside your side bags of tour pack.
• High-Efficiency Non-Digital amplifier design works within the parameters of the factory motorcycle charging system.
• Speakers bolt directly into the factory locations with no modifications or changes needed to the factory speakers mounting area.
• Allows you to upgrade your HD audio system and still retain all factory handle bar stereo controls.
• Wire harness and installation kit contents selected by Mitchell's Modesto Harley technicians so that the stereo will not void the motorcycles factory electrical warranty. (At No Point In This Installation Does The Motorcycles Main Harness Need To Be Cut!)
• Includes full plug and play input/output signal wire harness.
1x ARC Audio MOTO-800 4 Channel 800 Watt Motorcycle Amplifier (MOTO-800)
This new amplifier delivers more power and features from the compact HD motorcycle-specific chassis of the legendary MOTO 600.4 and MOTO 720. While it carries the MOTO category name, many ARC Audio dealers find the compact 8.125 by 5.5-inch footprint ideal for under-seat in exotic cars and behind-seat installations in trucks.
The MOTO 800 delivers an impressive 800+ watts of power across its four output channels and up to 400 x 2 watts when bridged to a single four-ohm speaker. The Load Select switch adjacent to each speaker connection plug allows installers to optimize the power production capabilities for each installation. This flexibility is ideal for side-by-side and automotive applications that use front speakers that need full power at four ohms and a subwoofer that presents a bridged four-ohm load. Speaker terminal blocks integrated to the amplifier chassis deliver solid and reliable power delivery to the speakers in even the harshest of conditions.
Specifications: 4- Channels @ 4 Ohms: 180 Watts
4-Channels @ 2 Ohms: 200 Watts
2-Channel @ 4 Ohms (Bridged): 400 Watts (Bridged)
2-Channel @ 2-Ohms (Bridged): Not Recommended
1-Channel @ 4-Ohms (Bridged): Not Recommended
Frequency Response: 10Hz - 20kHz
Amplifier Frequency Response (Using Factory Radio): 85Hz - 20kHz
Crossover Range: 50Hz - 550Hz
Bass Boost: No
S/N Ratio: 95dB
Remote Level Control Included: No
Input Sensitivity (Low): 200mV - 3.5V
Built in Fan Cooling: Yes
Fusing: 2 x 30amp
Signal Input Connection Type: Pigtail (PNP) Harness
Pigtail Harness Included: Yes, RCA harness included
Signal Input Connection compatibility: Direct connection to RCA Harness, PSM or MPAK wire harness kit
Dimensions: 8.125"(L) x 5.43"(W) x 1.8"(H)
1x Arc Audio HD-Power - 8-Gauge OFC Amplifier Wiring Kit compatible with Harley Davidson (HD-Power)
Arc Audio HD Power Kit
Looking to have big power on your HD motorcycle? Using the new ARC Audio Moto 600.4 amplifier? Then the ARC Audio HD Power kit is your ready to go plug and play solution for your motorcycle audio needs.
Designed to handle the higher current needs of the ARC Audio Moto600.4 amplifier, HD Power uses high quality 8 gauge OFC copper cable eliminating chances of corrosion or increases cable resistance over time due to the harsh open environment. Capable of supplying current to most any heavy duty application up to 60A of continuous current draw, HD Power comes complete with integrated/molded fuse holder (w/fuse), insulated high current ring terminals and factory type wire looming for the ultimate in power cable integration.
Works In Most Any Motorcycle Amplifier Application Up To 60A Continuous Current Draw.
Designed As A Plug And Play Power Kit Required For Use With The Moto600.4 Amplifier.
Includes Molded Hi-Current Fuse Holder (w/60A fuse).
Pre-Terminated And Insulated Battery Ring Terminals For Quick Connection At The Factory Battery.
8-Gauge Hi-Quality OFC Copper Core Cable (No CCA garbage here).
Loomed Harness Design Improved Integration And Ease Of Installation Into Your Motorcycle.
1x ARC PSM-PRO 6 Ch-in / 8 Ch-out Compact Stand-Alone DSP w/ Idata Maestro "AR" Compatibility. (PSM-PRO)
The ARC Audio PSM Pro digital sound processor is a small but powerful device that is designed to enhance the audio quality of your car or motorcycle's sound system. It is an upgraded version of the PSM offering even better performance and 8 channels of output.
The PSM Pro uses advanced 32-bit DSP technology and has 296 total bands of full variable parametric equalization, open architecture crossover selection, signal delay, and phase control. This allows you to tune your audio system to your specific preferences and improve the quality of your listening experience.
The PSM Pro is affordable and provides OEM integration, which means it can work seamlessly with the existing audio system of your car or motorcycle. For example, if you have a 2014+ HD motorcycle, the PSM Pro can be easily integrated with the ARC Audio Moto 720 amplifier to improve your audio system's performance.
The PSM Pro is designed to be easy to use and can be easily customized to suit your personal listening style using a Windows based computer.
The ARC Audio PSM Pro is an affordable and powerful solution for enhancing the audio quality of your car or motorcycle. It offers advanced features and can be easily integrated with a wide range of vehicles, making it a versatile choice for anyone looking to improve their listening experience.
Specifications -
• Processor Type: Stand Alone Unit
• Processor Resolution: 32-Bits
• Sample Rate: 96kHz
• Analog Inputs: 6 CH. Differential in (RCA or Speaker Level)
• Input Sensitivity: 2V - 16V RMS
• Digital Inputs: Coaxial
• Auto-sense Turn-On: DC (BTL) (Uses Ch 1/2 Inputs Only)
• Outputs (RCA): 8-Channels
• Outputs Voltage (RCA): Up to 3.5V
• Input Impedance (RCA): 10k ohms
• Frequency Response: 20Hz - 23.5kHz
• S/N Ratio 1V 1:1: 86dB
• S/N 4V 1:1: 90dB
1x Arc Audio Moto602-HD Horn Loaded Compression Coaxial Powersport & Motorcycle Speakers (MOTO-602-HD)
The new ARC Audio MOTO602HD is the speaker set of choice for motorcycle and powersports clients that are looking for the most output possible from their audio systems.
The new MOTO602HD speakers are designed from the ground up to make your clients’ H-D audio system sound crystal clear, even when traveling at 65+ miles an hour. The speakers feature carbon fiber reinforced ABS baskets that are a direct bolt-in replacement for 2014 and newer Harley-Davidson Road Glide and Street Glide applications. These speakers fit in the stock locations with no modifications.
The woofer features an oversized 1.25-inch heat-resistant Kapton former and an all-copper voice coil winding for impressive power handling. The outer edge of the woofer cone attaches to the basket with a double-roll low-loss spider to ensure amazing clarity at high drive levels while offering clearance for the factory speaker grill on the newer HD motorcycles.
1.25" Hi-Temp Precision Wound Voice Coil Increases Durability And Power Handling For Extended Hi-Demand Listening Periods
Environmental Treatments On All Components To Combat The Open Environment On Your Motorcycle
Integrated Horn Loaded Compression Driver Give Users High Output Volume Levels with an Edge that Keeps Them Rocking Even At High Cruising Speeds
Weather Resistant and Water Resistant HLCD Pole design Eliminates The Possibility Of Dirt Water Entering The Speakers Motor Assembly Thru The Face Of The Speaker
Carbon Fiber Reinforced Ultra-Lite Weight Poly Cone Improves Efficiency and rigidity for High Output Listening Periods
Specifications -
• Speaker Size: 6.5"
• Speaker Type: Coaxial w/HLCD
• Weather Resistant Design: Yes
• Power Handling (Peak): 250 Watts
• Power Handling (RMS): 125 Watts
• Sensitivity: 94dB
• Frequency Response: 70Hz - 20kHz
• Impedance: 4-Ohms
• Mounting Depth: 2 5/8"
• Tweeter Type: HLCD
• HLCD Material: Titanium Film
1x ARC Audio MOTO CX69 High Performance 6x9" Motorcycle Speakers, Pair (MOTO-CX69)
Moto series CX69 speakers deliver an enhanced level of balanced output
and efficiency over the previous design with improved mid-bass extension and accuracy, with complete attention given to the open environment applications speakers in this category, are designed for.
Based on a reimagined design, these next-gen speakers handle more power and shrug off water, dust, and debris better than their predecessors. They are technically a component speaker set with the tweeter mounted on a bridge above the woofer. The benefit of this design is a significant increase in the woofer cone area that improves efficiency and enhances low-frequency output capabilities. The elimination of the second weather-resistant surround around a coaxial pole piece found on its predecessor, the Moto692, provides an additional improvement in sound quality.
The basket features a high-density pressure cast four-spoke basket that features eight large hi-velocity cooling vents under the spider mounting plateau to help heat from the voice coil escape this custom-tooled design.
The motor is based around a Y35A-grade ferrite magnet, and the top plate is CNC-cut hot-rolled steel. Most listeners will perceive this upgrade over the previous design as delivering a smoother and more accurate midrange response with better overall accuracy and higher levels of efficiency effectively delivering more sound per watt than other brands while remaining composed with unmatchable musical properties.
As a complete scratch design, the staff in ARC Audio’s speaker transducer engineering team spent significant time optimizing every component for this new design. The woofer cones are based on an injection-molded polypropylene doped with carbon to increase thermal stability and improve the damping characteristics. Built with entirely UV-resistant materials that can stand the test of time the CX69 features a hi-clearance low-shore rubber surround and a form molded dual-step sealed 1-piece dust cap that covers the tri-layered bonded joint between the cone, the spider, and the 1.45-inch glass ber voice coil former.
The Moto CX69’s large diameter of the voice coil helps to improve thermal power handling by increasing its total surface area. Using lightweight, layered Kapton and glass ber as a foundation the CX69’s pure OFC copper windings are built using ARC Audio’s proprietary “Step-up” power handling design requirements greatly improving the thermal rating and overall power handling of the speaker. Likewise, the choice of a ferrite magnet allows it to act as a large-mass thermal heat sink to wick heat away from the voice coil assembly. The result is a speaker design that can “easily” handle its rated 125-watt musical / 300-peak power level rating with ease.
The spider is made of hybrid Nomex and features a constant wave progressive rolled design that prevents the assembly from bottoming out at extreme power levels. The spider, coil former, and cone are stagger step bonded together with a high-temperature adhesive rated for over 230 degrees C (440+ F) to ensure reliability and improve strength at extended hi-level listening periods.
Moving onto the tweeter of the CX69 the team at ARC used a highly efficient but sonically superior polyetherimide (PEI) and mylar dome damped with Norseal PVC mesh on the dome of this sealed and suspended design. This unique composite dome design is popular in pro audio compression drivers as it combines strength and damping with heat- and weather resistance. The CX69 Tweeters 25mm voice coil, much like the midrange uses a hi-temperature temper, step-cured adhesives on a copper voice coil wrapped around a composite Kapton mesh former, and a neodymium slug in the center of the voice coil serves as the motor.
Simply put, the CX69 is loaded with the latest and greatest speaker components and assembly technology. If you’re searching for a motorcycle speaker that sounds realistic and offers impressive midbass performance while still getting loud, then the MOTO CX69 should be the target product for your Harley Davidson Motorcycle, UTV, or even Marine audio application!
Specifications -
| Speaker Size | 6" X 9" |
| Speaker Type | Coaxial |
| Weather Resistant Design | Yes |
| Impedance | 4 ohms |
| Power Handling (Peak) | 300 Watts |
| Power Handling (RMS) | 125 Watts |
| SPL (Overall Average) | 95dB |
| Frequency Response | 50Hz - 20kHz |
| Magnet | Y35 magnet 1-piece T-yoke motor design (cast and then CNC refined for alignment accuracy and optimizing the magnetic structure) |
| Voice Coil | 1.45” voice coil, press glass fiber former, hi-temp tempered copper voice coil |
| Voice Coil Material | Voice coil is a multi-stage tempered design allowing for higher operating temperatures, reducing possible adhesive and material failure. Ultra hi-temp voice coil adhesive and material temp with thermal temperature rating over +230 Celsius.
The vented voice coil and motor design for improved cooling over long play periods. Progressive power testing process to improve handling and reliability at high output listening over prolonged periods of operation. Heavy-duty- diecast
basket.
|
| Cone Material | Carbon-filled PP cone and sealed front speaker design for greatly improved water resistance and all-weather riding. |
| Surround | Low shore progressive s-shape rubber surround |
| Spider Material | Progressive Nomex (Constant Wave Step Reduced shape design) |
| Tweeter Mounting | Stamped steel tri-mount tweeter support bracket. |
| Tweeter Diameter | 25mm |
| Tweeter Material | Dampened PEI/Mylar dome-shaped composite tweeter. (a material commonly used for compression drivers for pro audio, it's super light, strong, high temp-resistant, weather-resistant, and very good for high freq.) |
| Max Outer Diameter | 9.3" X 6.5" |
| Motor Diameter | 4.3" |
| Mounting Depth | 3.25"" |
| Flange Thickness | .25" |
| Cutout Diameter | 5.82” x 8.62” |
8x Memphis Audio ETP-3 3-Foot 2 -Channel Audio Interconnect Cables (ETP-3)
ETP RCA connections provide a sound connection for all of your audio equipment. These connectors feature molded color matched ends, flexible PVC jacket and twisted pair wires for noise rejection. Your system performance relies heavily on the connections you use. Don’t sacrifice your vehicles audio quality, use only the best connection available from Memphis Audio.
Molded color matched ends
Clear flexible PVC jacket
Twisted pair design for excellent noise rejection
End 1: 2 Male RCA
End 2: 2 Male RCA
CHANNELS: 2
LENGTH: 3ft