Description
Included in this kit
This bundle includes a Fusion MS-RA70NSX Marine Entertainment System with Bluetooth & NMEA 2000, 2x JL Audio M3-650X-C-Gw - M3 6.5" Marine Coaxial Speakers (pair) - Gloss White Classic Grilles, a JL Audio M3-10IB-C-Gw-4 - M3 10" 4-Ohm Infinite Baffle Marine Subwoofer - Gloss White Classic Grille, a JL Audio AP600/6 - 6-Channel Compact 600-Watt Marine Amplifier, a Metra MLAK4-10 4GA Marine Amp Kit 10ft w/100A Waterproof/Ignition CB, and a Fusion MS-ARX70W ANT Wireless Stereo Remote - White.
1x Fusion MS-RA70NSX Marine Entertainment System with Bluetooth & NMEA 2000 (MS-RA70NSX)
Fusion MS-RA70NSX Marine Entertainment System with Bluetooth & NMEA 2000
Introducing the MS-RA70N, FUSIONs sleekest value-packed marine stereo, designed to deliver a quality on-water entertainment experience by incorporating some of the latest marine technologies. Engineered to seamlessly replace any standard DIN sized non-marinised stereo without the need to reconfigure dash space. Clever styling allows an installer the option of either mounting the stereo with a conventional dash finish or an option to integrate into a glass helm with a flush surface mount, ensuring a high-end installation.
• Tuner - AM/FM with RDS (where available)
• Multi-Language User Interface - English, French, German, Spanish, Dutch and Italian
• Audio Zones - 2 on-board amplified zones
• Nameable Zones - Up to 10 characters
• Line Out - 2 (1 x L + R per zone. Requires amplification)
• Subwoofer Out - 1 (Zone 1. Requires amplification)
• Auxiliary Inputs - 1 x stereo RCA input (AUX)
• SiriusXM-Ready™ - Yes - a SiriusXM Connect Vehicle Tuner and subscription are required. Available in USA only.
• Fusion-Link Wireless - Available via Bluetooth with the Fusion-Link remote control app, available for download from the Apple App Store® or Google Play™. The Fusion-Link Lite app is available from the Garmin Connect IQ store to enable wireless control from a compatible Gamin watch.
• Fusion-Link Wired - Compatible with a Fusion marine NMEA 2000 wired remote control and any Fusion-Link supported MFD.
• NMEA 2000 Certified - LEN:1
• Bluetooth Wireless Technology - A2DP Bluetooth Audio Streaming with AVRCP
• USB - 1 x USB connector at the rear of the unit. Supports 1 amp charging.
• USB Audio Format - MP3
• Water Resistance - IPX7 water resistant front panel when installed correctly
• Chassis - Electrically isolated glass-filled composite chassis with an aluminium side-fin heat sink with VCT
• Amplifier - Class-AB 4 x 50W (@ 4 Ohms)
2x JL Audio M3-650X-C-Gw - M3 6.5" Marine Coaxial Speakers (pair) - Gloss White Classic Grilles (M3-650X-C-Gw)
JL Audio M3-650X-C-Gw - M3 6.5" Marine Coaxial Speakers (pair) - Gloss White Classic Grilles
6.5-inch coaxial system with 0.75-inch (19 mm) marine silk dome tweeters, 60W, 4 ohms
M3 Marine Coaxial Speakers - High-performance sound, engineered for real marine duty
Truly Engineered for Marine Duty
To ensure long-term performance, all models are designed and built to exceed industry standards for salt-fog and UV exposure. These are saltwater-rated products that you can use with confidence.
Outstanding Sound Quality
• Acoustically engineered to produce powerful, smooth sound in real-world, open-air, marine environments.
• Long-excursion, high-efficiency woofers and treated silk dome tweeters deliver superior output capability with clear, high frequency detail.
• Integrated 2nd order, high-pass filter on tweeters, with solid-state protection circuit to minimize the possibility of tweeter failure.
Versatile Power Requirements
• Suitable for use with standard marine head-unit power.
• Designed to benefit with quality amplification, such as the JL Audio marine amplifiers.
Choose Your Look
• Available in two grille styles: “Classic” or “Sport”, both in Gloss White. Sport models are also available in a sleek, all Gunmetal finish.
• Allows you to match the look of the speakers to the theme of the boat interior.
General Specifications
| Continuous Power Handling (RMS) | 60 W |
| Peak Music Power | 225 W |
| Recommended Amplifier Power (RMS) | 20 - 125 W / Ch. |
| System Efficiency | 89.5 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 Ω |
| System Frequency Response | 55 Hz - 25 KHz ± 3 dB |
Coaxial Physical Specifications
| Frame Outer Diameter (A) | 6.90 in / 175 mm |
| Bolt Hole Circle Diameter (B) | 6.125 in / 155.5 mm |
| Motor Outer Diameter (C) | 3.85 in / 98 mm |
| Frontal Grille Protrusion* (D) | 0.973 in / 25 mm |
| Mounting Hole Diameter (E) | 5.00 - 5.25 in / 127 - 133 mm |
| Mounting Depth (F) | 2.74 in / 69.5 m |
1x JL Audio M3-10IB-C-Gw-4 - M3 10" 4-Ohm Infinite Baffle Marine Subwoofer - Gloss White Classic Grille (M3-10IB-C-Gw-4)
JL Audio M3-10IB-C-Gw-4 - M3 10" 4-Ohm Infinite Baffle Marine Subwoofer - Gloss White Classic Grille
10-inch infinite baffle subwoofer, 175W, 4 ohms
High-performance Subwoofers, specifically engineered for marine duty
Truly engineered for marine duty.
To ensure long-term performance, all models are designed and built to exceed industry standards for salt-fog and UV exposure. These are salt-water rated products that you can use with confidence.
Outstanding Sound Quality
All models are designed to operate in open-air boat environments, delivering powerful, smooth sound that is several steps beyond common marine speakers. These are not car speakers painted white, they are acoustically engineered for boat installations. Engineered to operate without a dedicated enclosure.
Versatile power requirements
Suitable for use with standard marine head-unit power. Designed to benefit from operation with quality amplification, such as the JL Audio marine amplifiers.
Three great looks to choose from!
Available in two grille styles: “Classic” or “Sport”, both in Gloss White. Sport models are also available in a sleek, all Gunmetal finish.
Allows you to match the look of the speakers to the theme of the boat intrior and the customer’s tastes.
Physical Specifications
| Nominal Diameter | 10.0 in / 250 mm |
| Overall Diameter (A) | 10.75 in / 273 mm |
| Mounting Hole Diameter (B) | 8.875 in / 225 mm |
| Bolt Hole Circle Diameter (C) | 9.706 in / 247 mm |
| Motor Outer Diameter (D) | 5.29 in / 134 mm |
| Mounting Depth (E) | 5.12 in / 130 mm |
| Driver Displacement | 0.04 cu ft / 1.13 L |
| Net Weight | 6.5 lb / 2.94 kg |
Subwoofer Parameters
| Continuous Power Handling (RMS) | 175 Watts |
| Nominal Impedance (Znom) | 4 Ohm |
| Free Air Resonance (Fs) | 41.84 Hz |
| Electrical “Q” (Qes) | 0.806 |
| Mechanical “Q” (Qms) | 11.751 |
| Total Speaker “Q” (Qts) | 0.754 |
| Equivalent Compliance (Vas) | 1.29 cu ft / 36.53 L |
| One-Way Linear Excursion (Xmax)* | 0.42 in / 11 mm |
| Efficiency (1 W / 1 m)** | 87.23 dB SPL |
| Effective Piston Area (Sd) | 50.68 sq in / 0.0327 sq m |
| DC Resistance (Re) | 3.957 Ω |
1x JL Audio AP600/6 - 6-Channel Compact 600-Watt Marine Amplifier (AP600/6)
JL Audio AP600/6 – 6-Channel Staggered-Power Class-D Marine Amplifier
The JL Audio AP600/6 is a staggered-power 6-channel Class-D amplifier from the AP marine series, designed to deliver up to 600 watts of clean, efficient power from a compact, IP67-rated chassis. With four full-range channels plus a higher-power fifth/sixth channel pair, it can drive multiple speaker zones and a dedicated subwoofer from one amplifier, making it ideal for boats and powersports builds with several listening areas.
Staggered 6-Channel Power for Multi-Zone Systems
The AP600/6 is the most versatile amplifier in the AP lineup, with four full-range channels for speakers and a higher-powered fifth/sixth channel pair optimized for subwoofers or additional full-range zones. Its Class-D design provides strong output while keeping current draw manageable on marine electrical systems.
At 14.4 V and less than 1% THD, channels 1–4 are rated for 50 watts x 4 into 4 ohms or 75 watts x 4 into 2 ohms. Channels 5–6 provide 100 watts x 2 into 4 ohms, and can be bridged for up to 300 watts x 1 into 4 ohms. Bridging channels 1–4 yields up to 150 watts x 2 at 4 ohms. This staggered layout gives you the flexibility to power several speaker pairs and a subwoofer from one amplifier.
- 6-channel Class-D amplifier with staggered power for multi-zone marine and powersports systems.
- Channels 1–4: 50 W x 4 @ 4 Ω / 75 W x 4 @ 2 Ω; 150 W x 2 @ 4 Ω bridged (14.4 V, <1% THD).
- Channels 5–6: 100 W x 2 @ 4 Ω; 150 W x 2 @ 2 Ω; 300 W x 1 @ 4 Ω bridged (14.4 V, <1% THD).
- Full-range frequency response from 20 Hz–20 kHz (+0, -1 dB) on all channels for wide-band audio coverage.
- Signal-to-noise ratio >70 dB (A-weighted, 20 Hz–20 kHz, referred to 1 W) to maintain low system noise.
LCD On-Amp Control, Easy Tune & Marine Durability
A built-in LCD display gives you direct access to key amplifier settings right on the amp, simplifying setup and adjustment in tight installation spaces. For faster configuration, the AP600/6 supports the Easy Tune feature when used with a Fusion® stereo with built-in DSP and the Fusion® Audio app, allowing profile-based amplifier setup focused on sound quality and speaker protection.
The amplifier chassis carries an IP67 water and dust rating (excluding cables) and is ignition protected, making it suitable for demanding marine environments and appropriate engine compartment installations. Its compact size and efficient thermal design allow it to be tucked away while still reliably powering multiple zones.
- Built-in LCD display for manual control and configuration of amplifier settings.
- Easy Tune feature supported when paired with compatible Fusion® stereos and Fusion® Audio app.
- IP67-rated amplifier chassis (excluding cables) for water and dust resistance in marine use.
- Ignition protected design for compliant installation in suitable engine compartments.
- Physical dimensions (6-channel): 1.86" (H) x 11.81" (W) x 5.90" (D) / 47 x 300 x 150 mm.
| Part Number | 010-03430-00 (AP600/6, 6-channel model) |
| Channels | 6-channel, staggered power |
| Amplifier Class | Class D |
| Operating Voltage | 9–16 VDC |
| Water/Dust Rating | IP67 (amplifier chassis, excluding cables) |
| Operating Temperature | 4° to 149°F (-20° to 65°C) |
| Rated Power @ 4 Ω (14.4 V) | Ch 1–4: 50 W x 4 / 150 W x 2 bridged; Ch 5–6: 100 W x 2 / 300 W x 1 bridged (<1% THD) |
| Rated Power @ 2 Ω (14.4 V) | Ch 1–4: 75 W x 4; Ch 5–6: 150 W x 2 (<1% THD) |
| Frequency Response | 20 Hz – 20 kHz (+0, -1 dB) for 6-channel models |
| Signal-to-Noise Ratio | >70 dB (A-weighted, 20 Hz–20 kHz, referred to 1 W) |
| Standby Current | <1 mA |
| Idle Current | Approximately 1000–1500 mA (6-channel) |
| Fuse Rating | 70 A (AFS, AGU, or MaxiFuse™ recommended) |
| Minimum Power/Ground Wire | 4 AWG copper wire |
| Protection Circuits | Input under/over voltage, over-temperature, output short circuit |
| Amplifier Dimensions (H x W x D) | 1.86" x 11.81" x 5.90" (47 x 300 x 150 mm) |
| Warranty | 3 years |
| High-Pass / Low-Pass Filters | Yes – full-range filters, user selectable |
| Filter Modes – Channels 1 & 2 | Off, High-pass (HP) or Low-pass (LP) |
| Filter Modes – Channels 3 & 4 | Off, High-pass (HP) or Low-pass (LP) |
| Filter Modes – Channels 5 & 6 | Off, High-pass (HP) or Low-pass (LP) |
| Filter Slope | 12 dB/octave (all channel pairs) |
| Filter Frequency Range | 20 Hz – 500 Hz (HP or LP, channels 1–6) |
| HP Variable Crossover | Yes – 6-channel, 12 dB/octave |
| LP Variable Crossover | Yes – 6-channel, 20–500 Hz |
| Bass Boost EQ | 0 to +18 dB @ 37 Hz |
| Infrasonic Filter (Subwoofer) | 20–50 Hz, defeatable on channels 5–6 |
| Input Sensitivity | RCA inputs switchable: 200 mV–2 V RMS (Low), 800 mV–8 V RMS (High) |
| Input Impedance | 11 kΩ (High), 20 kΩ (Low) |
- JL Audio AP600/6 6-channel marine amplifier
- Four amplifier mounting screws
- Documentation and installation information
1x Metra MLAK4-10 4GA Marine Amp Kit 10ft w/100A Waterproof/Ignition CB (MLAK4-10)
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Marine compliant amplifier wiring kit
Fully tinned 100% virgin copper wire
BC5W2 marine compliant jacket
50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
Easy to solder tinned wiring
Connectors, ring terminals, and wire ties included
What’s in the box:
(1) 4-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
(1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
(2) 4-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
(1) 4-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
(1) 4-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
(1) Ignition protected circuit breaker (100-amp)
1x Fusion MS-ARX70W ANT Wireless Stereo Remote - White (ARX70W)
Enjoy the freedom to control your audio entertainment from anywhere on your boat. Whether you’re fishing at the transom or about to jump from the swim platform into the water, audio control is within reach any time, anywhere with the ARX remote – it’s never been so easy.
This remote can be used across a variety of Fusion ANT-enabled products including the 70 Series, 755 Series, StereoActive, Apollo RA770, Apollo RA670, Panel-Stereo, Panel-Stereo Outdoor and MS-BB100.
Endless Mounting Options With No Holes, Screws or Wires Required!
Forget about the hassle of cutouts and wires – you only need to stick the ARX remote on to any flat surface and press play to enjoy wireless audio control. Fitted with high bonding tape, the ARX70 is quick and easy to mount in almost any location. Stick your ARX70 where it is most convenient, whether it is the swim platform, bow, transom, cabin, or all of the above, for endless options when it comes to remote placement.
Designed for use anywhere on board, the ARX remote is UV stable and rated both IPX6 and IPX7 water resistant. This makes it ideal for mounting on the swim platform, bow or transom on your boat, with peace of mind that your remote is built to last wherever it is on board.