Description
Included in this kit
This bundle includes a JL Audio C1-690x 6 x 9-inch (150 x 230mm) Coaxial Speakers with 0.75-inch (19mm) aluminum dome tweeters, a Metra 82-3019 Speaker Adapter — Chevy Camaro | GM Multi-App 2010-2015 - 6"x9" (Rear Deck), and a Metra 72-4568 Speaker Wiring Harness For select 1988-up GM vehicles.
1x JL Audio C1-690x 6 x 9-inch (150 x 230mm) Coaxial Speakers with 0.75-inch (19mm) aluminum dome tweeters (C1-690x)
JL Audio C1-690x
Coaxial Speaker System: 6 x 9-inch (150 x 230 mm) Woofer, 1.0-inch (25 mm) Aluminum Dome Tweeter
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, spacer/adaptor rings are included allowing the C1-690x to be installed in bottom-mount applications.
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690x is a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.
Sold as a pair. Grilles not included.
General Specifications
| Continuous Power Handling (RMS) | 60 W |
| Peak Music Power | 225 W |
| Recommended Amplifier Power (RMS) | 10 - 100 W / Ch. |
| System Efficiency | 91.5 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 Ω |
| System Frequency Response | 39 Hz - 22 KHz ± 3 dB |
Physical Specifications
| Frame Outer Diameter* (A) | 6.38 x 9.33 in / 162 x 237 mm |
| Grille Tray Outer Diameter (B) | N/A |
| Motor Outer Diameter (C) | 3.54 in / 90 mm |
| Frontal Coaxial Tweeter Protrusion** (D) | 0.41 in / 10 mm |
| Frontal Grille Protrusion (E) | N/A |
| Mounting Hole Diameter (F) | N/A |
| Mounting Depth (G) | 2.75 in / 70 mm |
1x Metra 82-3019 Speaker Adapter — Chevy Camaro | GM Multi-App 2010-2015 - 6"x9" (Rear Deck) (82-3019)
Metra 82-3019 Speaker Adapter — Chevy Camaro | GM Multi-App 2010-2015 - 6"x9" (Rear Deck)
The Metra 82-3019 is a speaker mounting adapter. For the installation of most 6"x9" aftermarket speakers in the factory rear deck location. Applications include 2021-2023 Buick Envision and 2019-2024 Cadillac XT4. Check the full vehicle list and equipment requirements for your installation.
Features
- Supplied as a pair for a two-speaker installation.
- For the installation of most 6"x9" aftermarket speakers in the factory rear deck location.
- Perfect for upgrading to component speaker sets.
- Options are available for 6" speakers: See the Complete Your Install section for details.
- For use in multiple vehicle applications.
| Manufacturer model | 82-3019 |
|---|---|
| Product type | speaker mounting adapter |
| Connection / size specification | For the installation of most 6"x9" aftermarket speakers in the factory rear deck location |
| Product feature | Perfect for upgrading to component speaker sets |
| Product feature | For use in multiple vehicle applications |
| Product feature | Breakaway tab design |
| Included components | Sold as a pair |
| Connection / size specification | Options are available for 6" speakers: See the Complete Your Install section for details |
| Warranty | 1-year warranty |
| Included components | (2) Speaker adapter plates |
Vehicle Applications
- 2021-2023 Buick Envision
- 2019-2024 Cadillac XT4
- 2020-2024 Cadillac XT6
- 2019-2026 Chevrolet Blazer
- 2024-2025 Chevrolet Blazer EV
- 2010-2015 Chevrolet Camaro
- 2024-2025 Chevrolet Silverado 1500
- 2024-2025 Chevrolet Silverado 2500 HD
- 2024-2025 Chevrolet Silverado 3500 HD
- 2025 Chevrolet Suburban
- 2024-2026 Chevrolet Traverse
- 2022-2025 GMC Sierra 1500
- 2024-2025 GMC Sierra 2500 HD
- 2024-2025 GMC Sierra 3500 HD
- 2025 GMC Yukon
- 2025 GMC Yukon XL
Installation Notes
They mount directly at the factory rear deck location, with no drilling required, and feature a breakaway tab design for easy installation. For the installation of most 6"x9" aftermarket speakers in the factory rear deck location.
Product Details and Requirements
- Upgrade your speakers with the help of these speaker adapter plates. These adapters are sold as a pair and are designed to install most 6"x9" aftermarket speakers in multiple vehicle applications, making them convenient to have on hand. They mount directly at the factory rear deck location, with no drilling required, and feature a breakaway tab design for easy installation.
- Features:
- Includes:
- For the installation of most 6"x9" aftermarket speakers in the factory rear deck location
- Perfect for upgrading to component speaker sets
- For use in multiple vehicle applications
- Breakaway tab design
- Sold as a pair
- Options are available for 6" speakers: See the Complete Your Install section for details
- 1-year warranty
- (2) Speaker adapter plates
1x Metra 72-4568 Speaker Wiring Harness For select 1988-up GM vehicles (72-4568)
GM 88-Up Speaker Harness Sold as Pair