Description
Included in this kit
This bundle includes a Cicada Audio FLX1400.4 - 4 x 350 @ 2 Ohm Amplifier, a Cicada Audio CHX65.2 - Pro Coaxial Horn Loaded Speakers 6.5-inch - 2 Ohm, Pair, a Cicada Audio CHX69.2 - Pro Coaxial Horn Loaded Speakers 6x9-inch - 2 Ohm, Pair, a Cicada Audio 24CHDRGG - H-D 2024 + RG Kidney Grill - PR, a Cicada Audio 24CHDLID 2024+ H-D® Saddlebag Lid 6×9-inch Cut-in Mounting Kit, a Cicada Audio HDPG4K - 4 Gauge Power/Ground Kit, a Cicada Audio 24HDZENHCAKIT NAV-TV® ZEN-H™ and Cicada Audio® A2B Audio Interface Harness Kit, a Cicada Audio 24HDRO 2024+ H-D® Rear Output Speaker Wire Harness, and a Cicada Audio 24HDAR-RG 2024+ H-D® Road Glide® Amplifier Rack.
1x Cicada Audio FLX1400.4 - 4 x 350 @ 2 Ohm Amplifier (FLX1400.4)
4 CHANNEL POWER AMPLIFIER
Requires 4 AWG Power Wire – HDPG4K
4 X 200 WRMS into 4 ohms @ 12.5 Vdc
4 X 225 WRMS into 4 ohms @ 14.4 Vdc
4 X 300 WRMS into 2 ohms @ 12.5 Vdc
4 X 350 WRMS into 2 ohms @ 14.4 Vdc
BRIDGED MONO – 2 CHANNEL
2 X 600 WRMS into 4 ohms @ 12.5 Vdc
2 X 700 WRMS into 4 ohms @ 14.4 Vdc Frequency response – 20-20,000 +/- 3dB THD < 0.5%
Operating Voltage: 8 V – 16 V
Current Draw (Music): 50 A
Current Draw (Max): 220 A
Recommended Fuse (Music): 120 A
Total Efficiency: 79%
Damping Factor: 200
SNR: 91 dB
Crossover LPF/FULL/HPF: 30 TO 300Hz
Slope:12dB per octave
Gain: 0.2V – 12 Vac
Turn-On Configuration: REM/DC
THD + N (10% Rated Power): 0.1%
Product Dimensions (Inches / Millimeters): 7.6 x 4.9 x 2.0 in / 193 x 124 x 51 mm
1x Cicada Audio CHX65.2 - Pro Coaxial Horn Loaded Speakers 6.5-inch - 2 Ohm, Pair (CHX65.2)
FEATURES:
Designed for 2014+ H-D® factory designed locations
Nanofram™ Horn Cover
Exclusive Cicada All-Weather Design for protection from rain
N35SHSH Neo magnet
Water proofing, UV protected
External 12dB crossover with optional -3/-6 tweeter resistor pack
Available in 4- or 2-Ω versions
Aluminum tweeter diaphragm material
Brighter sound
More efficient
Carbon Matrix Composite™ (CMC™) cone
Lightweight / rigid / high temp
Maximized efficiency / super strong
Die cast Aluminum custom tooled basket
Warranty: 2 years
Specifications
6.5” PRO coaxial horn driver
Power handling: 300W RMS/600W MAX
Voice Coils: 2.0”/51mm mid-bass & 1.75”/44mm Tweeter
High temperature Design
Cone: Carbon Matrix Composite™
Tweeter Dome: Aluminum
Crossover: 12dB external custom tooled, vented, encased crossover
Tweeter Attenuation: -3/-6 dB heat sink encased resistor pack
Magnet: Neodymium
Sensitivity: 92dB
response 70hz-20Khz +/- 4dB
Mounting Depth: 2.64”/67mm
Mounting Diameter: 5.67”/144mm
1x Cicada Audio CHX69.2 - Pro Coaxial Horn Loaded Speakers 6x9-inch - 2 Ohm, Pair (CHX69.2)
FEATURES:
Nanofram™ Horn Cover
Exclusive Cicada All-Weather Design for protection from rain
Rain or Shine™ all weather performance design
Available in 4 or 2Ω versions
Aluminum tweeter diaphragm material
Brighter sound
More efficient
1.75″ OFC copper wire tweeter voice coils offer great sound while generating less heat
External 12dB crossover with optional -3/-6 tweeter resistor attenuator
Carbon Matrix Composite™ (CMC™) cone
Lightweight / rigid / high temp
Maximized efficiency / super strong
Black Coat™ 2.5-inch high conductivity, low resistance OFC copper wire mid-bass voice coil ensures extreme temperature thermal performance
N35SH Neodymium magnet
Die cast Aluminum custom tooled basket with Vortex Flow Venting™
Warranty: 2 years
SPECIFICATIONS:
2Ω – 6X9-inch PRO coaxial horn driver
Power handling: 400W RMS/800W MAX
Voice Coil: 2.5-inch/64mm Mid-bass & 1.75-inch/44mm Tweeter
High temperature design
Tweeter Dome: Aluminum
Crossover: 12dB external custom tooled, vented, encased crossover
Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover
Cone: Carbon Matrix Composite™
Magnet: Neodymium
Sensitivity: 92dB, 1W / 1M
Frequency Response: 46Hz – 20kHz +/- 3dB
Mounting Depth: 3.75-inch/96mm
Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm
1x Cicada Audio 24CHDRGG - H-D 2024 + RG Kidney Grill - PR (24CHDRGG)
Crafted from high-quality aluminum, these custom-built grilles are designed specifically to fit 2024 and newer Harley-Davidson Road Glide models. Each grille includes a Cicada Audio® Branded Emblems, ensuring a precise fit and clean installation. Built for durability and performance, these grilles offer a sleek, factory-style appearance while optimizing audio performance—all proudly featuring the Cicada Audio® brand.
1x Cicada Audio 24CHDLID 2024+ H-D® Saddlebag Lid 6×9-inch Cut-in Mounting Kit (24CHDLID)
Designed for 2023.5+ Harley-Davidson® updated saddlebag design
Unique Top Load Speaker Baffle Design
3 Part Assembly:
- Speaker Grill
- Speaker Baffle
- Secure Clamping ring with waterproof gasket
Compatible with:
- CICADA 6×9 speakers, even with full size cast frames and oversized surrounds
- CICADA Hard Divider, Tweeter Bridge Accessories
- CICADA 24RING10, 24PORT3 and all CICADA 8” or 10” Midbass drivers.
Baffle Angle that perfectly positions the speaker towards the rider for optimal projection
Increased durability for heavier full size, full depth 6×9 speakers
Better Waterproofing with the fully gasketed baffle clamp
High-strength ASA plastic for durability and performance
UV Resistant materials for long lasting appearance
Engineered for perfect fit and easy installation
Grille Mesh formed with heavy duty powder-coated steel
Edgeless trim design and rugged speaker protection
Compatible with saddlebags featuring electric locks
Included Accessories:
ABS molded Cutout Templates
Heavy duty updated Lid Gasket Seals
Rainproof Lid Covers
CICADA Tethers with Crossover pouch
Die cut speaker gasketing
1x Cicada Audio HDPG4K - 4 Gauge Power/Ground Kit (HDPG4K)
4 AWG H-D® Amplifier Power Kit
6ft Power/Ground with black over braid, terminated w/ ring terminals at the battery side, Ferrules on the amp side
Remote trigger wire w/ H-D® plug for termination to remote trigger or plug into the H-D® harness
Waterproof Mini ANL Fuse Holder w/60- and 100-amp fuses
1x Cicada Audio 24HDZENHCAKIT NAV-TV® ZEN-H™ and Cicada Audio® A2B Audio Interface Harness Kit (24HDZENHCAKIT)
FEATURES
Direct‑Fit Integration for NAV TV ZEN H‑D® A2B Interfaces
Engineered specifically for seamless use with the NAV TV ZEN H‑D® A2B Interface, ensuring a clean, plug‑and‑play installation with no cutting, splicing, or guesswork.
Purpose‑Built for Cicada Audio® Amplifiers
Equipped with correctly pinned Molex® connectors designed to mate directly with the input and output ports of all Cicada Audio® amplifiers, guaranteeing perfect compatibility.
OEM‑Grade Construction
Built using high‑quality automotive‑grade materials for maximum durability, vibration resistance, and long‑term reliability in the harsh motorcycle environment.
Precision‑Engineered Signal Routing
Provides clean, stable audio signal delivery from the ZEN H‑D® A2B interface to your amplifier system, ensuring optimal sound quality with zero noise or interference.
Simplified Installation
Reduces install time dramatically—no depinning, no rewiring, and no modification to the factory harness required. Simply plug in and go.
Secure Locking Connectors
All connectors feature positive‑locking mechanisms to prevent accidental disconnects due to road vibration, heat, or long‑term wear.
Compact, Clean Layout
Designed with tight routing and minimal bulk to fit neatly within Harley‑Davidson® fairings without adding clutter.
Optimized for Harley-Davidson® Audio Upgrades
Perfect for technicians and DIY builders who want a reliable, direct‑connect solution when upgrading or expanding a 2024 + H-D® factory or aftermarket system.
1x Cicada Audio 24HDRO 2024+ H-D® Rear Output Speaker Wire Harness (24HDRO)
Compatible with 2024 and newer Harley-Davidson® models
Connects rear speaker output to aftermarket audio systems
Includes main harness with factory-style connectors
Two short extensions and two longer leads for flexible installation
Color-coded wiring (green, blue, purple) for easy identification
Braided black sheathing for a clean, professional look and added durability
Plug-and-play design—no cutting or splicing required
1x Cicada Audio 24HDAR-RG 2024+ H-D® Road Glide® Amplifier Rack (24HDAR-RG)
HASSLE-FREE INSTALLATION
Easily mount using OEM amplifier mounting locations and mount amp to rack with predrilled holes.
Black Anodized Finish
Aluminum construction
Mounting hardware included
Designed for all FLX style amplifiers