Description
Included in this kit
This bundle includes a Cicada Audio FLX700.4PRO 4 x 175 @ 2Ω Amplifier w/DSP PROcessor - DIALD tuning software, a Cicada Audio 24HDAR-SG FLX Dual Amplifier Mounting System H-D® Street Glide, a Cicada Audio CH65.2C High Efficiency 6.5-Inch Horn Coaxial Speakers - 2Ω - Original Classic Design, a Cicada Audio 24CHDSGG - 2024+ Street Glide Cicada Audio® Branded Grilles, a Cicada Audio HDPG6K 6 Gauge Power/Ground Kit, a Cicada Audio 24HDZENHCAKIT NAV-TV® ZEN-H™ and Cicada Audio® A2B Audio Interface Harness Kit, and a Cicada Audio 24HDRO 2024+ H-D® Rear Output Speaker Wire Harness.
1x Cicada Audio FLX700.4PRO 4 x 175 @ 2Ω Amplifier w/DSP PROcessor - DIALD tuning software (FLX700.4PRO)
SPECIFICATIONS
4 Channel (14.4v)-RMS Power Output: 120w x 4 @ 4 Ω stereo, 175w x 4 @ 2 Ω stereo
2 Channel Bridged Mode (14.4v): 350w x 2 @ 4 Ω -RMS Power Output
Additional Specifications:
Built in 4CH input / 6CH output digital signal processor
SNR: 91dB (A-weighted, 20 Hz – 20 kHz)
Operating Voltage: 9v – 16v
Current Draw (Music): 50 A
Current Draw (Max): 80 A
Recommended Fuse (Music): 50 A
Total Efficiency: 80%
Frequency response 20 Hz – 20 kHz +/- 3 dB
Damping Factor: 200
Crossover LPF/FULL/HPF: 20 – 20kHz
Slope: 6/12/24/48 dB per octave
Gain: 0.2 V – 12 V
Turn-On Configuration: REM/DC/VOX
THD + N (10% Rated Power): 0.1% @ 2 Ω per channel
Dimensions (Mounting Brackets): 5.3 x 4.9 x 2.0-inch, 134 x 125 x 51mm
Dimensions (Chassis): 4.1 x 4.9 x 2.0-inch, 104 x 125 x 51mm
1x Cicada Audio 24HDAR-SG FLX Dual Amplifier Mounting System H-D® Street Glide (24HDAR-SG)
Amplifier Mounting Rack for 2024+ H-D® Street Glide®
HASSLE-FREE INSTALLATION
Easily mount using OEM amplifier mounting locations and mount amp to rack with predrilled holes.
Black Anodized Finish
Aluminum construction
Mounting hardware included
Designed for all FLX style amplifiers
1x Cicada Audio CH65.2C High Efficiency 6.5-Inch Horn Coaxial Speakers - 2Ω - Original Classic Design (CH65.2C)
6.5" 2-Ohm Coaxial Horn Driver – 250W RMS
This 6.5-inch 2-ohm coaxial horn driver is built around the Larry Frederick Original Classic Design and engineered for high-efficiency output in 2014+ H-D® factory locations (some models include a 0.5-inch spacer). With 250 watts RMS and 500 watts max power handling, it delivers strong mid-bass impact and crisp high-frequency response in a factory-fit footprint.
Performance Highlights
- 250W RMS / 500W MAX power handling
- 96.4 dB sensitivity (1W/1M)
- 75Hz – 20kHz frequency response (±5 dB)
- 2-ohm impedance for amplifier efficiency
- 12 dB crossover at 4 kHz
Tweeter & Crossover Engineering
The aluminum dome tweeter uses a 1.4-inch (36mm) OFC copper voice coil to deliver brighter sound and maximized efficiency while minimizing heat buildup. A custom-tooled, vented, encased external 12 dB crossover network is precisely tuned at 4 kHz for smooth transition between mid-bass and high frequencies.
Mid-Bass & Motor Structure
A lightweight, water-resistant treated paper cone provides efficient output and high-temperature durability. The 2-inch (51mm) OFC copper mid-bass voice coil with Black Coat™ ensures high conductivity, low resistance, and strong thermal performance under load.
The N35SH Neodymium magnet motor structure and custom die-cast aluminum basket with Vortex Flow Venting™ improve cooling and structural rigidity for consistent performance at higher output levels.
Fitment & Installation
Designed for 2014+ H-D® factory locations, with select models including a 0.5-inch spacer for proper fitment.
- Mounting Depth: 3.0" (76.2 mm)
- Mounting Diameter: 5.7" (145.5 mm)
Specifications
| Speaker Size | 6.5-inch |
|---|---|
| Impedance | 2 Ohm |
| Power Handling (RMS) | 250 Watts |
| Power Handling (Max) | 500 Watts |
| Sensitivity | 96.4 dB (1W/1M) |
| Frequency Response | 75Hz – 20kHz ±5 dB |
| Mid-Bass Voice Coil | 2-inch (51mm) OFC Copper |
| Tweeter Voice Coil | 1.4-inch (36mm) OFC Copper |
| Tweeter Dome | Aluminum |
| Crossover | 12 dB @ 4 kHz (External) |
| Cone Material | Water-Resistant Treated Paper |
| Magnet | N35SH Neodymium |
| Mounting Depth | 3.0-inch (76.2 mm) |
| Mounting Diameter | 5.7-inch (145.5 mm) |
| Warranty | 2 Years |
1x Cicada Audio 24CHDSGG - 2024+ Street Glide Cicada Audio® Branded Grilles (24CHDSGG)
2024+ Street Glide Cicada Audio® Branded Grilles
Description:
Crafted from high-quality aluminum, these custom-built grilles are designed specifically to fit 2024 and newer Harley-Davidson Street Glide models. Engineered for durability and style, they feature the Cicada Audio® branding and deliver a sleek, seamless look that complements your bike’s design.
1x Cicada Audio HDPG6K 6 Gauge Power/Ground Kit (HDPG6K)
6ft Power/Ground with black over braid, terminated w/ ring terminals at the battery side, Ferrules on the amp side
Remote trigger wire w/ H-D® plug for termination to remote trigger or plug into the H-D® harness
Waterproof Mini ANL Fuse Holder w/60, 80 and 100-amp fuses
1x Cicada Audio 24HDZENHCAKIT NAV-TV® ZEN-H™ and Cicada Audio® A2B Audio Interface Harness Kit (24HDZENHCAKIT)
FEATURES
Direct‑Fit Integration for NAV TV ZEN H‑D® A2B Interfaces
Engineered specifically for seamless use with the NAV TV ZEN H‑D® A2B Interface, ensuring a clean, plug‑and‑play installation with no cutting, splicing, or guesswork.
Purpose‑Built for Cicada Audio® Amplifiers
Equipped with correctly pinned Molex® connectors designed to mate directly with the input and output ports of all Cicada Audio® amplifiers, guaranteeing perfect compatibility.
OEM‑Grade Construction
Built using high‑quality automotive‑grade materials for maximum durability, vibration resistance, and long‑term reliability in the harsh motorcycle environment.
Precision‑Engineered Signal Routing
Provides clean, stable audio signal delivery from the ZEN H‑D® A2B interface to your amplifier system, ensuring optimal sound quality with zero noise or interference.
Simplified Installation
Reduces install time dramatically—no depinning, no rewiring, and no modification to the factory harness required. Simply plug in and go.
Secure Locking Connectors
All connectors feature positive‑locking mechanisms to prevent accidental disconnects due to road vibration, heat, or long‑term wear.
Compact, Clean Layout
Designed with tight routing and minimal bulk to fit neatly within Harley‑Davidson® fairings without adding clutter.
Optimized for Harley-Davidson® Audio Upgrades
Perfect for technicians and DIY builders who want a reliable, direct‑connect solution when upgrading or expanding a 2024 + H-D® factory or aftermarket system.
1x Cicada Audio 24HDRO 2024+ H-D® Rear Output Speaker Wire Harness (24HDRO)
Compatible with 2024 and newer Harley-Davidson® models
Connects rear speaker output to aftermarket audio systems
Includes main harness with factory-style connectors
Two short extensions and two longer leads for flexible installation
Color-coded wiring (green, blue, purple) for easy identification
Braided black sheathing for a clean, professional look and added durability
Plug-and-play design—no cutting or splicing required