Description
52L7XS121 12" SoloXS L7XS 1 Ohm DVC Square Subwoofer
The KICKER 52L7XS121 is a 12-inch SoloXS L7XS square subwoofer built for extreme excursion, ultra-deep bass, and very high output. Designed as part of KICKER’s pinnacle SoloXS line, it combines exceptionally high power handling, massive motor strength, long-throw suspension design, and service-friendly recone construction for serious bass systems that demand both output and durability.
Overview
SoloXS Output for Extreme Bass Systems
The 52L7XS121 is part of KICKER’s SoloXS L7XS family, built to take square subwoofer performance beyond the already aggressive SoloX platform. The provided family information describes SoloXS as offering more power, more stroke, and more Xmax, with a design focused on both extreme SPL capability and strong musicality.
In this 12-inch version, KICKER combines a massive ferrite motor, long-throw suspension system, and a heavy-duty 3-inch voice coil platform to support exceptionally high excursion and serious low-frequency output.
- 12" SoloXS L7XS square subwoofer.
- Built for ultra-deep bass at very high volume.
- Designed for both extreme output and musical performance.
Core Performance
High Power, Long Stroke, Massive Motor
The 52L7XS121 is rated for 1500 to 3000 watts RMS and uses a 3-inch aluminum voice-coil former with a 3.4-inch winding width. A total magnet weight of 705 ounces (20 kg) and an Xmax of 43.1 mm support the heavy-excursion behavior expected from the SoloXS platform.
- 1500-3000W recommended amplifier power.
- 3" voice coil diameter.
- 43.1mm Xmax.
- 705 oz / 20 kg total magnet weight.
Feature Highlights
What Sets the 52L7XS121 Apart
Construction & Engineering
Built Beyond Typical High-Power Subwoofer Design
The SoloXS family is described as being built with extremely tight tolerances and with more power, more stroke, and more Xmax than the SoloX line. On the 52L7XS121, that approach is backed by a max-cooling cast-aluminum basket, custom rubber magnet boot, extra-large dual spiders, and a substantial ferrite motor assembly.
- Max-cooling cast-aluminum basket.
- Custom rubber boot for oversized ferrite magnet.
- Extra-large dual-spider suspension.
- Double-pressed pulp cone.
Enclosure & Fitment
Vented Enclosure Data for the 12" SoloXS
The provided enclosure recommendation specifies a 3.0 cubic foot vented box tuned to 31 Hz. Associated vent dimensions are listed as a 3.5 x 13 inch port opening with a 36.5 inch port length, while physical mounting specs include a 10-1/8 inch mounting depth and 11-1/16 inch cutout.
- Recommended vented volume: 3.0 cu ft.
- Vented tuning frequency: 31 Hz.
- Mounting depth: 10-1/8".
- Cutout: 11-1/16".
The SoloXS family information states that the pre-assembled recone assembly is designed for fast on-site service using a no-glue replacement approach with alignment pins and bolt-on attachment points.
| Model | KICKER 52L7XS121 |
| Series | SoloXS L7XS |
| Size | 12" (30 cm) |
| Configuration | 1 ohm DVC |
| Recommended Amp Power RMS | 1500-3000 watts |
| Frequency Response | 20-100 Hz |
| Voice Coil Diameter | 3" (75 mm) |
| Voice Coil Winding Width | 3.4" (86.2 mm) |
| Magnet Diameter | 9.85" (25 cm) |
| Total Magnet Weight | 705 oz (20 kg) |
| Top Plate Thickness | 0.8" (20 mm) |
| Xmax | 1.71" (43.1 mm) |
| Mounting Cutout | 11-1/16" (28.1 cm) |
| Mounting Depth | 10-1/8" (25.7 cm) |
| Recommended Vented Box Volume | 3.0 cu ft (84.9 L) |
| Port Opening | 3.5" x 13" (9 x 33 cm) |
| Port Length | 36.5" (93 cm) |
| Vented Enclosure Tuning Frequency | 31 Hz |
| Re | 2.08 Ohm |
| fs | 35.8 Hz |
| Mms | 612.687 g |
| Bl | 23.9945 Tm |
| Qms | 4.371 |
| Qes | 0.497 |
| Qts | 0.4465 |
| Vas | 17.89565 l |
| Sd | 625 cm² |
| Lnom | 83.85 dB |
| Xmax | 43 mm |
