Description
Included in this kit
Alpine SWT-S10 10" Bass System compatible with ASA3-200.2 Amplifier - This bundle includes a Alpine SWT-S10 1200W Max (250W RMS) Single 10" Vented Subwoofer Tube Enclosure, a ASA3-200.2 - 100 Watt x 2 @ 2-Ohm Amplifier, a pry kit, and an Alpine coozy.
Alpine SWT-S10 1200W Max (250W RMS) Single 10" Vented Subwoofer Tube Enclosure
1200W Max Single 10" Vented Subwoofer Tube Enclosure
Power Handling:
Peak: 1200W Total
RMS: 250W Total
Final Impedance: 4 ohms
Preloaded with a single 10" Subwoofer
Vented enclosure with black carpet
Enclosure Dimensions: 11.22"W x 23.6" D
ASA3-200.2 - 100 Watt x 2 @ 2-Ohm Amplifier
Features -
2-Channel 200 Watt High Efficiency Class A/B Design
2-ohm Stable (4-ohm in Bridged Mode)
PWM MOSFET Power Supply
Low Level RCA Input/Low Level RCA Pass Through Output
Remote Soft Delay Turn On/Off Circuit
Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output.
Wired Secondary Remote Gain Control (Optional PB-GAIN1)
Switchable Logo Back Lighting
Specifications -
Selectable Subwoofer EQ: 0-18 dB Gain @ 45Hz
Inputs: RCA Input/RCA Pass-Through Output
Equalization Boost/Cut: 0 - 18 dB
Subwoofer Frequency Range: 20 Hz - 250 Hz
4-ohm Mono Power: 200 watts x 1
4-ohm Power: 50 watts x 2
2-ohm Power: 100 watts x 2
Subwoofer EQ Frequency: 45 Hz
Variable Subwoofer EQ: 0 - 18 dB
Low-Pass Crossover Freq: 40 Hz - 250 Hz
High-Pass Crossover Freq: 40 Hz - 250 Hz
Peak Power: 400 watts
Dimensions (in Inches): 9.0" x 8.3" x 2.3"
Input Sensitivity: 0.25 V - 6.0 V
S/N Ratio: >94 dB
Total Harmonic Distortion: 0.05% at Rated Power
Output Power (14.4 V) @ 4 ohm: 50 watts x 2
Output Power (14.4 V) @ 2 ohm: 100 watts x 2
Channels (mono): 2
Frequency Response: 20 Hz - 22 kHz
