Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure, S-A60M 600 Watt Mono Amplifier, and Wiring Kit

Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure, S-A60M 600 Watt Mono Amplifier, and Wiring Kit - This bundle includes a Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure, a Alpine S-A60M Mono Digital Subwoofer Amplifier - 600 Watts x 1 @ 2-Ohms & 330 Watts x 1 @ 4-Ohms, a wiring kit, and an Alpine coozy.

Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure

Unique to Alpine, the subwoofer 10-inch and 10-inch enclosures are available as a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.

• Includes R-W10D4 wired in parallel
• 750W RMS power handling
• 2Ω Impedance
• Ported enclosure design
• Frequency response: 26-200 Hz
• Vent tuning frequency: 36 Hz
Alpine S-A60M Mono Digital Subwoofer Amplifier - 600 Watts x 1 @ 2-Ohms & 330 Watts x 1 @ 4-Ohms

The S-Series Amplifiers have a diagnostic LED located behind the blue Alpine Jewell on the top of the amplifier. A Blue light means the amplifier is operating normally. A red blinking light means the amplifier is currently too hot for operation and needs to cool down. A solid red light can mean three things; 1. Amplifier circuit is abnormal. 2. Temperature is too high. 3. Power supply voltage is too high.

Specifications:
• Power output 4-Ohm @ 14.4 Volts: 330 W RMS X 1
• Power output 2-Ohm @ 14.4 Volts: 600 W RMS X 1
• THD 10 W into 4 Ohms: Less Than 0.03%
• THD 10 W into 2 Ohms: Less Than 0.05%
• THD Rated Power 4 Ohms: Less Than 0.02%
• THD Rated Power 2 Ohms: Less Than 1.0%
• S/N Ratio: 1 W into 4 Ohms: >85dB
• Frequency Response:+0/-3 dB 10Hz - 400Hz
• Frequency Response:+0/-1 dB 20Hz - 300Hz
• Input Sensitivity: Hi (0.5 - 10V), Low (0.2 - 4.0V)
• Crossover: Variable HPF/LPF, (50Hz - 400 Hz)