Description
Included in this kit
This bundle includes an Alpine RUX-KNOB.2 Remote Bass Knob, 2x Alpine S2-W10D2 10" S-Series Dual 2-Ohm Car Subwoofer, 1800W Max, 600W RMS, and an Alpine S2-A120M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 1200W RMS at 1 & 2-Ohm.
1x Alpine RUX-KNOB.2 Remote Bass Knob (RUX-KNOB.2)
The optional RUX-KNOB remote bass control knob plugs right in to the MRX-M50, MRX-M100, MRX-V60, PDX-M12 and PDX-M6 mono models for quick direct subwoofer control to make bass adjustments on the fly.
Compatible Models
The RUX-KNOB is specifically designed as the controller for use with any of the following PDX Amplifiers: MRX-M50, MRX-M100, MRX-V60, PDX-M12, and PDX-M6.
From the Inside
With the RUX-KNOB, get full control over your PDX-M6 or PDX-M12 amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Multiple Amp Control
Yes, there is a way to control multiple amps from just one RUX-KNOB controller – with the use of simple telephone cord adapters (which are readily available at many retailers).
2x Alpine S2-W10D2 10" S-Series Dual 2-Ohm Car Subwoofer, 1800W Max, 600W RMS (S2-W10D2)
Alpine S2-W10D2 - Next-Generation 10” S-Series Subwoofer with Dual 2-Ohm Voice Coils
Add extra punch to your sound system with the S-Series S2-W10D2 10" Subwoofer; now redesigned for powerful and reliable bass performance at an approachable price point.
PERFORMANCE & VALUE
With an impressive power handling of 600W RMS and a peak power handling of 1800W, the Next-Gen 10” S-Series Subwoofers deliver outstanding performance value. Boasting a wide frequency response range of 25Hz to 215Hz and a sensitivity of 85dB (1W/1m), these subs ensure powerful and accurate bass reproduction across a diverse range of music genres.
ENHANCED PUNCH
Featuring the lightweight yet sturdy combination of carbon fiber and polypropylene, the Next-Gen S-Series Subwoofer cone delivers deep, low-distortion bass that enhances the depth and richness of your music.
FLEXIBLE APPLICATION
A Dual Voice Coil (DVC) with easy configuration jumpers make installing the S-Series subwoofers a breeze. A new twist-lock grille mounting system makes it easy to install and remove an optional grille without mounting screws for added protection to the cone.
PERFECT POWER MATCH
Maximize the potential of your S-Series subwoofers with Alpine's perfectly power-matched S-Series amps. Power a single S2-W10D2 subwoofer effortlessly with the 600W S2-A60M mono amplifier, or for an even bigger impact, pair two S2-W10D2 subs with the powerful 1200W S2-A120M amp to ensure optimal sound quality and performance.
FEATURES
• Dual Voice Coil Subwoofers with Configuration Jumpers
• Carbon Fiber / Poly Propylene Cone
• Poly Propylene / Ceramic Dust Cap
• High-Grade Strontium Ferrite Magnets
• Twist-Lock Grille Mount System
• High-Amplitude Multi-Roll (H.A.M.R.) Surround
• Push-Type Speaker Terminals
TECH SPECS
• Power Handling: 600W RMS / 1800W Peak
• Nominal Impedance: 2Ω
• Frequency Response: 25Hz - 215Hz
• Sensitivity (1W/1M): 84.7dB
• Voice Coil: 2.6"
• X-Max (1-Way): 15mm
• Magnet Weight: 64oz
1x Alpine S2-A120M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 1200W RMS at 1 & 2-Ohm (S2-A120M)
PRODUCT OVERVIEW
Entry-level sound just got elevated with the S2-A120M Mono Amplifier. Its sleek design houses an Alpine Class D Amplifier Circuit with 1200W of powerful bass performance.
PRODUCT FEATURES
Unparalled Power - Alpine’s S-Series S2-A120M 1200W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 1200W at a 1ohm or 2ohm drive, this mono amp is capable of driving even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications.
Simplified Installation – The amplifier was intentionally designed with sound controls located on the side panels, instead of the top panel, making it easier to access gain and crossover controls when installed under vehicle seats or in shallow-depth locations. Removable end caps were added to cover the side controls and connections, providing a clean, sleek finish to the amplifier.
MAIN FEATURES
• 1200W Mono Amplifier
• Alpine’s Class D Amplifier Circuit
• Two-Sided Terminal Layout
• Built-in Selectable / Adjustable Crossovers
• Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
TECH SPECS
• Dimensions: 13.1” W x 2.25” H x 8.25” D
• Weight: 8 lbs, 11 oz
• Power Rating: 14.4V, < 0.1% THD +N
• Power Output: 600W x 1 @ 4Ω, 1200W x 1 @ 2Ω, 1200W x 1 @ 1Ω
• S/N Ratio: >85dB
• Frequency Response: 20Hz – 400Hz
• Damping Factor: >750
WHAT’S IN THE BOX
• (x1) S2-A120M Mono Amplifier
• (x2) Connection end covers w/4 attachment screws
• Owner’s Manual
• “Birth Sheet” that certifies by measurement the actual power of the amplifier in the box
• (x4) Self-tapping screws
• (x1) Hexagon wrench
• Alpine Registration Card
• Alpine Limited Warranty Sheet
• Tips sheet for power supply wire connections