Description
Included in this kit
This bundle includes an ARC Audio MOTO-800 4 Channel 800 Watt Motorcycle Amplifier, and 2x ARC Audio MOTO-CX6 High Performance Motorcycle Speaker.
1x ARC Audio MOTO-800 4 Channel 800 Watt Motorcycle Amplifier (MOTO-800)
This new amplifier delivers more power and features from the compact HD motorcycle-specific chassis of the legendary MOTO 600.4 and MOTO 720. While it carries the MOTO category name, many ARC Audio dealers find the compact 8.125 by 5.5-inch footprint ideal for under-seat in exotic cars and behind-seat installations in trucks.
The MOTO 800 delivers an impressive 800+ watts of power across its four output channels and up to 400 x 2 watts when bridged to a single four-ohm speaker. The Load Select switch adjacent to each speaker connection plug allows installers to optimize the power production capabilities for each installation. This flexibility is ideal for side-by-side and automotive applications that use front speakers that need full power at four ohms and a subwoofer that presents a bridged four-ohm load. Speaker terminal blocks integrated to the amplifier chassis deliver solid and reliable power delivery to the speakers in even the harshest of conditions.
Specifications: 4- Channels @ 4 Ohms: 180 Watts
4-Channels @ 2 Ohms: 200 Watts
2-Channel @ 4 Ohms (Bridged): 400 Watts (Bridged)
2-Channel @ 2-Ohms (Bridged): Not Recommended
1-Channel @ 4-Ohms (Bridged): Not Recommended
Frequency Response: 10Hz - 20kHz
Amplifier Frequency Response (Using Factory Radio): 85Hz - 20kHz
Crossover Range: 50Hz - 550Hz
Bass Boost: No
S/N Ratio: 95dB
Remote Level Control Included: No
Input Sensitivity (Low): 200mV - 3.5V
Built in Fan Cooling: Yes
Fusing: 2 x 30amp
Signal Input Connection Type: Pigtail (PNP) Harness
Pigtail Harness Included: Yes, RCA harness included
Signal Input Connection compatibility: Direct connection to RCA Harness, PSM or MPAK wire harness kit
Dimensions: 8.125"(L) x 5.43"(W) x 1.8"(H)
2x ARC Audio MOTO-CX6 High Performance Motorcycle Speaker (MOTO-CX6)
The CX6 offers a completely redesigned chassis. With a slimmer design and shallower mounting depth, the CX6 will fit a wide array of applications with ease. The new completely sealed front face and floating tweeter design offer even better protection from the elements than ever before. The CX6 boasts increased power handling with 260 watts max, and 110 watts RMS as well as improved frequency response from 50Hz - 20kHz. This means you can enjoy your music just the way you like it, loud and clear.
Speaker Size: 6.5"
Speaker Type: Coaxial
Weather Resistant Design: Yes
Impedance: 4 ohms
Power Handling (Peak): 260 Watts
Power Handling (RMS): 110 Watts
SPL (Overall Average): 92.5dB
Frequency Response: 50Hz - 20kHz
Magnet: Y35 magnet 1-piece T-yoke motor design
Voice Coil: 1.25” voice coil, press glass fiber former, hi-temp tempered copper voice coil
Voice Coil Material: Ultra hi-temp voice coil adhesive and material temp with thermal temperature rating over +230 Celsius. The vented voice coil and motor design for improved cooling over long play periods. Progressive power testing process to improve handling and reliability at high output listening over prolonged periods of operation.
Cone Material: Carbon-filled PP cone and sealed front speaker design for greatly improved water resistance and all-weather riding.
Surround: Low shore progressive s-shape rubber surround
Spider Material Progressive Nomex (Constant Wave shape design)
Tweeter Mounting: Stamped steel tri-mount tweeter support bracket.
Tweeter Diameter: 25mm
Tweeter Material: Dampened PEI/Mylar dome-shaped composite tweeter. (a material commonly used for compression drivers for pro audio, it's super light, strong, high temp-resistant, weather-resistant, and very good for high freq.)
Max Outer Diameter: 6.5"
Motor Diameter: 3.52"
Mounting Depth: 2.42"
Flange Thickness: .29"
Cutout Diameter: 5.57"