Description
Included in this kit
This bundle includes an ARC Audio MOTO-800 4 Channel 800 Watt Motorcycle Amplifier, an ARC Audio MOTO-CX6 High Performance Motorcycle Speaker, and an ARC Audio MOTO CX69 High Performance 6x9" Motorcycle Speakers, Pair.
1x ARC Audio MOTO-800 4 Channel 800 Watt Motorcycle Amplifier (MOTO-800)
This new amplifier delivers more power and features from the compact HD motorcycle-specific chassis of the legendary MOTO 600.4 and MOTO 720. While it carries the MOTO category name, many ARC Audio dealers find the compact 8.125 by 5.5-inch footprint ideal for under-seat in exotic cars and behind-seat installations in trucks.
The MOTO 800 delivers an impressive 800+ watts of power across its four output channels and up to 400 x 2 watts when bridged to a single four-ohm speaker. The Load Select switch adjacent to each speaker connection plug allows installers to optimize the power production capabilities for each installation. This flexibility is ideal for side-by-side and automotive applications that use front speakers that need full power at four ohms and a subwoofer that presents a bridged four-ohm load. Speaker terminal blocks integrated to the amplifier chassis deliver solid and reliable power delivery to the speakers in even the harshest of conditions.
Specifications: 4- Channels @ 4 Ohms: 180 Watts
4-Channels @ 2 Ohms: 200 Watts
2-Channel @ 4 Ohms (Bridged): 400 Watts (Bridged)
2-Channel @ 2-Ohms (Bridged): Not Recommended
1-Channel @ 4-Ohms (Bridged): Not Recommended
Frequency Response: 10Hz - 20kHz
Amplifier Frequency Response (Using Factory Radio): 85Hz - 20kHz
Crossover Range: 50Hz - 550Hz
Bass Boost: No
S/N Ratio: 95dB
Remote Level Control Included: No
Input Sensitivity (Low): 200mV - 3.5V
Built in Fan Cooling: Yes
Fusing: 2 x 30amp
Signal Input Connection Type: Pigtail (PNP) Harness
Pigtail Harness Included: Yes, RCA harness included
Signal Input Connection compatibility: Direct connection to RCA Harness, PSM or MPAK wire harness kit
Dimensions: 8.125"(L) x 5.43"(W) x 1.8"(H)
1x ARC Audio MOTO-CX6 High Performance Motorcycle Speaker (MOTO-CX6)
The CX6 offers a completely redesigned chassis. With a slimmer design and shallower mounting depth, the CX6 will fit a wide array of applications with ease. The new completely sealed front face and floating tweeter design offer even better protection from the elements than ever before. The CX6 boasts increased power handling with 260 watts max, and 110 watts RMS as well as improved frequency response from 50Hz - 20kHz. This means you can enjoy your music just the way you like it, loud and clear.
Speaker Size: 6.5"
Speaker Type: Coaxial
Weather Resistant Design: Yes
Impedance: 4 ohms
Power Handling (Peak): 260 Watts
Power Handling (RMS): 110 Watts
SPL (Overall Average): 92.5dB
Frequency Response: 50Hz - 20kHz
Magnet: Y35 magnet 1-piece T-yoke motor design
Voice Coil: 1.25” voice coil, press glass fiber former, hi-temp tempered copper voice coil
Voice Coil Material: Ultra hi-temp voice coil adhesive and material temp with thermal temperature rating over +230 Celsius. The vented voice coil and motor design for improved cooling over long play periods. Progressive power testing process to improve handling and reliability at high output listening over prolonged periods of operation.
Cone Material: Carbon-filled PP cone and sealed front speaker design for greatly improved water resistance and all-weather riding.
Surround: Low shore progressive s-shape rubber surround
Spider Material Progressive Nomex (Constant Wave shape design)
Tweeter Mounting: Stamped steel tri-mount tweeter support bracket.
Tweeter Diameter: 25mm
Tweeter Material: Dampened PEI/Mylar dome-shaped composite tweeter. (a material commonly used for compression drivers for pro audio, it's super light, strong, high temp-resistant, weather-resistant, and very good for high freq.)
Max Outer Diameter: 6.5"
Motor Diameter: 3.52"
Mounting Depth: 2.42"
Flange Thickness: .29"
Cutout Diameter: 5.57"
1x ARC Audio MOTO CX69 High Performance 6x9" Motorcycle Speakers, Pair (MOTO-CX69)
Moto series CX69 speakers deliver an enhanced level of balanced output
and efficiency over the previous design with improved mid-bass extension and accuracy, with complete attention given to the open environment applications speakers in this category, are designed for.
Based on a reimagined design, these next-gen speakers handle more power and shrug off water, dust, and debris better than their predecessors. They are technically a component speaker set with the tweeter mounted on a bridge above the woofer. The benefit of this design is a significant increase in the woofer cone area that improves efficiency and enhances low-frequency output capabilities. The elimination of the second weather-resistant surround around a coaxial pole piece found on its predecessor, the Moto692, provides an additional improvement in sound quality.
The basket features a high-density pressure cast four-spoke basket that features eight large hi-velocity cooling vents under the spider mounting plateau to help heat from the voice coil escape this custom-tooled design.
The motor is based around a Y35A-grade ferrite magnet, and the top plate is CNC-cut hot-rolled steel. Most listeners will perceive this upgrade over the previous design as delivering a smoother and more accurate midrange response with better overall accuracy and higher levels of efficiency effectively delivering more sound per watt than other brands while remaining composed with unmatchable musical properties.
As a complete scratch design, the staff in ARC Audio’s speaker transducer engineering team spent significant time optimizing every component for this new design. The woofer cones are based on an injection-molded polypropylene doped with carbon to increase thermal stability and improve the damping characteristics. Built with entirely UV-resistant materials that can stand the test of time the CX69 features a hi-clearance low-shore rubber surround and a form molded dual-step sealed 1-piece dust cap that covers the tri-layered bonded joint between the cone, the spider, and the 1.45-inch glass ber voice coil former.
The Moto CX69’s large diameter of the voice coil helps to improve thermal power handling by increasing its total surface area. Using lightweight, layered Kapton and glass ber as a foundation the CX69’s pure OFC copper windings are built using ARC Audio’s proprietary “Step-up” power handling design requirements greatly improving the thermal rating and overall power handling of the speaker. Likewise, the choice of a ferrite magnet allows it to act as a large-mass thermal heat sink to wick heat away from the voice coil assembly. The result is a speaker design that can “easily” handle its rated 125-watt musical / 300-peak power level rating with ease.
The spider is made of hybrid Nomex and features a constant wave progressive rolled design that prevents the assembly from bottoming out at extreme power levels. The spider, coil former, and cone are stagger step bonded together with a high-temperature adhesive rated for over 230 degrees C (440+ F) to ensure reliability and improve strength at extended hi-level listening periods.
Moving onto the tweeter of the CX69 the team at ARC used a highly efficient but sonically superior polyetherimide (PEI) and mylar dome damped with Norseal PVC mesh on the dome of this sealed and suspended design. This unique composite dome design is popular in pro audio compression drivers as it combines strength and damping with heat- and weather resistance. The CX69 Tweeters 25mm voice coil, much like the midrange uses a hi-temperature temper, step-cured adhesives on a copper voice coil wrapped around a composite Kapton mesh former, and a neodymium slug in the center of the voice coil serves as the motor.
Simply put, the CX69 is loaded with the latest and greatest speaker components and assembly technology. If you’re searching for a motorcycle speaker that sounds realistic and offers impressive midbass performance while still getting loud, then the MOTO CX69 should be the target product for your Harley Davidson Motorcycle, UTV, or even Marine audio application!
Specifications -
| Speaker Size | 6" X 9" |
| Speaker Type | Coaxial |
| Weather Resistant Design | Yes |
| Impedance | 4 ohms |
| Power Handling (Peak) | 300 Watts |
| Power Handling (RMS) | 125 Watts |
| SPL (Overall Average) | 95dB |
| Frequency Response | 50Hz - 20kHz |
| Magnet | Y35 magnet 1-piece T-yoke motor design (cast and then CNC refined for alignment accuracy and optimizing the magnetic structure) |
| Voice Coil | 1.45” voice coil, press glass fiber former, hi-temp tempered copper voice coil |
| Voice Coil Material | Voice coil is a multi-stage tempered design allowing for higher operating temperatures, reducing possible adhesive and material failure. Ultra hi-temp voice coil adhesive and material temp with thermal temperature rating over +230 Celsius.
The vented voice coil and motor design for improved cooling over long play periods. Progressive power testing process to improve handling and reliability at high output listening over prolonged periods of operation. Heavy-duty- diecast
basket.
|
| Cone Material | Carbon-filled PP cone and sealed front speaker design for greatly improved water resistance and all-weather riding. |
| Surround | Low shore progressive s-shape rubber surround |
| Spider Material | Progressive Nomex (Constant Wave Step Reduced shape design) |
| Tweeter Mounting | Stamped steel tri-mount tweeter support bracket. |
| Tweeter Diameter | 25mm |
| Tweeter Material | Dampened PEI/Mylar dome-shaped composite tweeter. (a material commonly used for compression drivers for pro audio, it's super light, strong, high temp-resistant, weather-resistant, and very good for high freq.) |
| Max Outer Diameter | 9.3" X 6.5" |
| Motor Diameter | 4.3" |
| Mounting Depth | 3.25"" |
| Flange Thickness | .25" |
| Cutout Diameter | 5.82” x 8.62” |