Description
Included in this kit
This bundle includes an Audison Forza AF M8.14 bit 8 CH Amplifier with 14 Channels DSP - 8 x 90W at 4Ω, an Audison Forza AF M1D D Class Mono Amplifier - 1 x 600W at 4Ω, an Audison AF LINK CABLE Connects AF bit amplifier DSP OUT to AF D companion amps, and an Audison APBX 10DS Prima Series 10" 4Ω DVC Sealed Subwoofer Enclosure System.
1x Audison Forza AF M8.14 bit 8 CH Amplifier with 14 Channels DSP - 8 x 90W at 4Ω (AF-M8.14-bit)
AMPLIFIER TECH DATA
Power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 30A
Operating power supply voltage: 6.5 ÷ 17.5 VDC
Idling current: 1.5 A
Standby Current Draw: 1.7 A
Consumption @ 14.4 VDC, 2Ω, Max Musical Power: 55 A
Remote IN: 4 ÷15 VDC (1 mA)
Remote OUT: 6.5 ÷15 VDC (150 mA)
ART - Automatic Remote Turn on/ off from OUTPUT BTL speakers: 1.5 VDC
Efficiency Rated Power: 82%
AMPLIFIER STAGE
Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power: 0.05%
Bandwidth @ -1.5 dB: 10 Hz ÷ 42 kHz
Damping factor @ 1 kHz, 4Ω, 2 VRMS: 100
S/N ratio (A weighted @ 1 V Input) Master Input: 98.5 dBA
S/N ratio (A weighted @ 1 V Input) Optical Input: 105
Minimum load impedance: 8Ch: 2Ω | 4Ch – (Bridge 1/2; 3/4; 5/6; 7/8): 4Ω
Output Continuous Power (RMS) @14.4 VDC, 1% THD: 8 Ch @ 4Ω: 90 W x 8, 8 Ch @ 2Ω: 140 W x 8, 4Ch (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ω: 280 W x 4
Adjustable Crossover: Yes
INPUTS / OUTPUTS
Pre-In Inputs: 0.6 ÷ 6 VRMS (15 kΩ Imp.)
Digital Input: Yes
Pre Outputs: 2
Hi Level Inputs: 8
Low Level Inputs: 8
Speaker-In Inputs: 2.2 ÷ 22 VRMS (5 Ω Imp.)
Digital IN: 1 x Optical S/PDIF; Max 192 kHz / 24 bit + 1 x Optical/Coaxial S/PDIF with optional F2O card
DIGITAL SIGNAL PROCESSOR
Audio DSP Converter: Analog Devices ADAU1467 automotive qualified audio processor., Processing @ 96 kHz.Analog Devices 3 x ADAU1978 (4ch) and ADAU1966A (16ch) A/D and D/A converters (24 bit/192 kHz) providing very high level performance
Filter type: Full / High-Pass / Low-Pass / Band-Pass
Crossover frequency: 20 Hz ÷ 20 kHz
Phase control: 0° / 180°, All-Pass filters
Analog Input Equalizer (20 ÷ 20k Hz): 12 Biquad + Delay
Output Equalizer: Parametric/Graphic Biquad: 15 poles, 20 Hz ÷ 20 kHz
Time Alignment Distance: 0 ÷ 510 cm / 0 ÷ 200.8 inches
Input Output Real Time Audio Monitor: RTA
GENERAL REQUIREMENTS
PC connections: Micro USB 1.1 / 2.0 / 3.0 Compatible
Software/PC requirements: Windows 10, Windows 11 (min. res. 1024 x 768)
Ambient operating temperature range: 0 °C to 55 °C (32 °F to 131 °F)
1x Audison Forza AF M1D D Class Mono Amplifier - 1 x 600W at 4Ω (AF-M1D)
AF M1D boasts one high-fidelity amplified channel 600W @4Ω*, 1000W @2Ω*, and 1200W @1Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package!
*Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven.
Technical Specification
POWER SUPPLY
Nominal power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 35 A
Pulse operating voltage: 6.5 ÷ 17.5 VDC
Idling current: 1.3 A
Standby current draw: 0.005 mA
Consumption @ 14.4 VDC, Minimum load impedance (Max Musical Power): 65 A
Remote IN: 4 ÷15 VDC (1 mA)
Remote OUT: 6.5 ÷15 VDC (150 mA)
ART – Automatic Remote Turn on/off from Speaker-In: 1.5 VDC
Efficiency @ rated power (RMS) @14.4 VDC, 1% THD,4Ω, All Channels: 81%
AMPLIFIER STAGE
Distortion – THD+N @ 1 KHz, 4Ω, 70% Rated Power: 0.1%
Damping factor @ 1 kHz , 4Ω, 2 VRMS: 140
Bandwidth @ -3 dB: 10 Hz ÷ 500 Hz
S/N ratio (A weighted @ 1 V Input, Rated Power) Master Input: 105 dBA
Minimum load impedance: 1 Ω
Output Continuous Power (RMS) @14.4 VDC, 1% THD: 1Ch @ 4Ω: 600 W, 1Ch @ 2Ω: 1000 W, 1Ch @ 1Ω: 1200 W
CEA SPECIFICATIONS
Output power @ 4Ω, 1% THD+N, 14.4 V: 600 W
SN ratio (ref. 1 W output): 80,5 dBA
INPUTS / OUTPUTS / FILTERS
Inputs: Pre-In / Speaker-In
Input sensitivity Pre-In: 0.6 ÷ 6 VRMS
Input sensitivity Speaker-In: 2.2 ÷ 22 VRMS
SUB remote Volume Control (optional): ±12 dB
GENERAL REQUIREMENTS
Ambient operating temperature range: 0 °C to 55 °C (32 °F to 131 °F)
SIZE / WEIGHT
Max size W x H x D (mm/inch): 240 x 47 x 156 / 9.44 x 1.85 x 6.14
Weight (kg/lb): 2.04 / 4.49
1x Audison AF LINK CABLE Connects AF bit amplifier DSP OUT to AF D companion amps (AF-LINK-CABLE)
The Audison AF Link is an accessory cable to connect the DSP OUT outputs of the Audison AF bit amplifiers (amplifiers with integrated DSP) to the PRE IN inputs of the Audison AF D amplifiers. Look at all the connection examples in the Owner’s manual!
1x Audison APBX 10DS Prima Series 10" 4Ω DVC Sealed Subwoofer Enclosure System (APBX-10DS)
APBX 10 DS - SUB BOX SEALED 250mm 4+4Ohm
The APBX 10 DS, a 10” subwoofer loaded in a 12-litres sealed enclosure, is the line’s “flagship”. It is dedicated to the highest performing Prima systems, using the AP1 D amplifier for the sub section. The speaker’s mechanical excursion of more than 18 mm provides for incredible authority, while the refined Thiele&Small parameters set-up provides the ideal balance for all music genres.
Features -
• Ultra-low profile (5.6 in. / 142 mm) box with sealed design perfectly tuned to fully exploit the APS 10 D driver.
• 2S² (2 Sides/2 Sounds) design provides the ability to choose between Down-Firing mounting to increase the low-frequency extension and Up-Firing install to obtain more punch and definition.
• Leveling feet with velcro inserts included for a secure grip with the carpet while maintaining easy removal.
• SSP (Sub Smart Plug) features both traditional push contacts and a Plug-&-Play terminal block to easily configure the impedance as required and provides a quick release.
• Rounded corners allow easy positioning in the trunk and act as reinforcement to reduce enclosure resonance.
• Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (11 mm, one-way).
• Massive driver motor assembly, optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions.
• Water-repellent pressed paper 10 in. cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.
• Specifically developed to be combined with either the AP8.9 bit (2 CH + 2 CH bridged), AP5.9 bit (Sub CH) or AP4.9 bit/AP4 D (2 CH bridged) amplifiers taking advantage of the bass boost feature and integrated parametric equalizer of the built-in DSP.