Description
Included in this kit
This bundle includes an Audison AV 6.5 P II Set 6.5 in.(165mm) Woofer, 40mm VC, and a Stinger RKFR6 Roadkill Fast Rings 6" & 6.5".
1x Audison AV 6.5 P II Set 6.5 in.(165mm) Woofer, 40mm VC (AV-6.5-P-II)
The Audison VOCE II AV 6.5 P II woofer is engineered to deliver exceptional sound clarity and precision. It naturally rolls off at off-axis positions, eliminating the need for a low-pass filter in most door installations and reducing phase shifts common with other filters. It can employ a gentle 6 dB/Octave filter to enhance low and mid-bass tones, further enriching sound quality. The woofer’s OEM-style connector, compatible with FASTON terminals and designed for seamless integration, features a unique T-shaped pole piece with an aluminum ring to minimize distortion and enhance frequency response.
Give Sound Its True Voice
Audison Voce II, the second generation of our iconic VOCE speakers, challenged us—to rethink how we design, test, and manufacture speakers. We’ve revamped materials, supply chains, assembly techniques, and packaging. Our goal was to “unlearn” to innovate and to “reinforce our expertise” where we knew we were on the right track. This dedication ensures that every aspect of VOCE II not only meets but exceeds the sophisticated demands of today’s car audio enthusiasts.
Specifications
Technical Specs
Nominal diameter: 165 mm (6.5 in)
Impedance: 4 Ohm
Minimum Impedance: 3.1 Ohm
Power Handling - Peak: 300 W
Power Handling - Continuous: 150 W
Sensitivity: 91 dB
Frequency Response: 45 - 7500 Hz
Voice Coil Ø: 40 mm (1.6 in)
Chassis Material: ALUMINIUM
Magnet Material: HIGH DENSITY FLUX FERRITE
Magnet size D x d x h: 100 x 45 x 18 (3.9 x 1.8 x 0.7) mm
Voice Coil Material: CCAW
Former Material: GLASS FIBER
Cone Material: SEMI-PRESSED PAPER
Surround Material: RUBBER
Xmax: 4.95 mm (0.19 in)
Xmech: 7.5 mm (0.3 in)
Voice Coil Winding Height: 13 mm (0.51 in)
Gap Height: 6 mm (0.24 in)
Electric-acoustic Specs
D: 128.3 cm² (19.887 in²)
Re: 2.9 Ohm
Fs: 66 Hz
Le: 0.3 mH
Vas: 9.09 l (0.321 ft)
Mms: 15.3 g (0.54 oz)
Cms: 0.38 mm/N
BL: 5.5 T•m
Qts: 0.57
Qes: 0.61
Qms: 9.06
General
Weight: 1.6 kg
Dimensions
Width: 165 mm (6.5 in)
Length: 165 mm (6.5 in)
Depth: 74.2 mm (2.92 in)
Mounting Depth: 69.8 mm (2.75 in)
Centre to centre distance: 155 mm
Hole diameter: 4.5 mm
1x Stinger RKFR6 Roadkill Fast Rings 6" & 6.5" (RKFR6)
Our 3-piece foam ring speaker enhancement system solves the problem of acoustically coupling aftermarket speakers to factory speaker openings. The RoadKill Fast Rings kit increases speaker output, improves the projection of the audio into the car cabin and reduces unwanted rear reflections that can degrade the sound.
3-piece Foam Ring System fits 6" & 6.5" Speakers
Features:
Reduce panel vibration
Increase mid-bass response
Enhanced audio output efficiency
Minimize destructive wave interference
Help prevent front and rear wave cancellation
Easy installation with peel & stick application
Maximize performance for speaker installations
Sold in pairs
3 Ring DNA
Gasket for speaker mounting to the baffle plate surface
Middle ring to mount around the outer edge of the speaker
Circular foam pad goes behind the speaker to absorb unwanted reflections on hard surfaces, such as inside a car door