Description
Included in this kit
This bundle includes an Audison APBX 10DS Prima Series 10" 4Ω DVC Sealed Subwoofer Enclosure System, and an Audison Forza AF M1D D Class Mono Amplifier - 1 x 600W at 4Ω.
1x Audison APBX 10DS Prima Series 10" 4Ω DVC Sealed Subwoofer Enclosure System (APBX-10DS)
APBX 10 DS - SUB BOX SEALED 250mm 4+4Ohm
The APBX 10 DS, a 10” subwoofer loaded in a 12-litres sealed enclosure, is the line’s “flagship”. It is dedicated to the highest performing Prima systems, using the AP1 D amplifier for the sub section. The speaker’s mechanical excursion of more than 18 mm provides for incredible authority, while the refined Thiele&Small parameters set-up provides the ideal balance for all music genres.
Features -
• Ultra-low profile (5.6 in. / 142 mm) box with sealed design perfectly tuned to fully exploit the APS 10 D driver.
• 2S² (2 Sides/2 Sounds) design provides the ability to choose between Down-Firing mounting to increase the low-frequency extension and Up-Firing install to obtain more punch and definition.
• Leveling feet with velcro inserts included for a secure grip with the carpet while maintaining easy removal.
• SSP (Sub Smart Plug) features both traditional push contacts and a Plug-&-Play terminal block to easily configure the impedance as required and provides a quick release.
• Rounded corners allow easy positioning in the trunk and act as reinforcement to reduce enclosure resonance.
• Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (11 mm, one-way).
• Massive driver motor assembly, optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions.
• Water-repellent pressed paper 10 in. cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.
• Specifically developed to be combined with either the AP8.9 bit (2 CH + 2 CH bridged), AP5.9 bit (Sub CH) or AP4.9 bit/AP4 D (2 CH bridged) amplifiers taking advantage of the bass boost feature and integrated parametric equalizer of the built-in DSP.
1x Audison Forza AF M1D D Class Mono Amplifier - 1 x 600W at 4Ω (AF-M1D)
AF M1D boasts one high-fidelity amplified channel 600W @4Ω*, 1000W @2Ω*, and 1200W @1Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package!
*Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven.
Technical Specification
POWER SUPPLY
Nominal power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 35 A
Pulse operating voltage: 6.5 ÷ 17.5 VDC
Idling current: 1.3 A
Standby current draw: 0.005 mA
Consumption @ 14.4 VDC, Minimum load impedance (Max Musical Power): 65 A
Remote IN: 4 ÷15 VDC (1 mA)
Remote OUT: 6.5 ÷15 VDC (150 mA)
ART – Automatic Remote Turn on/off from Speaker-In: 1.5 VDC
Efficiency @ rated power (RMS) @14.4 VDC, 1% THD,4Ω, All Channels: 81%
AMPLIFIER STAGE
Distortion – THD+N @ 1 KHz, 4Ω, 70% Rated Power: 0.1%
Damping factor @ 1 kHz , 4Ω, 2 VRMS: 140
Bandwidth @ -3 dB: 10 Hz ÷ 500 Hz
S/N ratio (A weighted @ 1 V Input, Rated Power) Master Input: 105 dBA
Minimum load impedance: 1 Ω
Output Continuous Power (RMS) @14.4 VDC, 1% THD: 1Ch @ 4Ω: 600 W, 1Ch @ 2Ω: 1000 W, 1Ch @ 1Ω: 1200 W
CEA SPECIFICATIONS
Output power @ 4Ω, 1% THD+N, 14.4 V: 600 W
SN ratio (ref. 1 W output): 80,5 dBA
INPUTS / OUTPUTS / FILTERS
Inputs: Pre-In / Speaker-In
Input sensitivity Pre-In: 0.6 ÷ 6 VRMS
Input sensitivity Speaker-In: 2.2 ÷ 22 VRMS
SUB remote Volume Control (optional): ±12 dB
GENERAL REQUIREMENTS
Ambient operating temperature range: 0 °C to 55 °C (32 °F to 131 °F)
SIZE / WEIGHT
Max size W x H x D (mm/inch): 240 x 47 x 156 / 9.44 x 1.85 x 6.14
Weight (kg/lb): 2.04 / 4.49