Description
Included in this kit
This bundle includes an Audison APBX 10DS Prima Series 10" 4Ω DVC Sealed Subwoofer Enclosure System, an Audison Forza AF M1D D Class Mono Amplifier - 1 x 600W at 4Ω, a Kicker 46CK8 K-Series Complete 8-AWG Amplifier Connection Kit W/ 2-Channel RCA Interconnects, and a Kicker 47KEYLOC Key Series Smart Powered Line-Out Converter.
1x Audison APBX 10DS Prima Series 10" 4Ω DVC Sealed Subwoofer Enclosure System (APBX-10DS)
APBX 10 DS - SUB BOX SEALED 250mm 4+4Ohm
The APBX 10 DS, a 10” subwoofer loaded in a 12-litres sealed enclosure, is the line’s “flagship”. It is dedicated to the highest performing Prima systems, using the AP1 D amplifier for the sub section. The speaker’s mechanical excursion of more than 18 mm provides for incredible authority, while the refined Thiele&Small parameters set-up provides the ideal balance for all music genres.
Features -
• Ultra-low profile (5.6 in. / 142 mm) box with sealed design perfectly tuned to fully exploit the APS 10 D driver.
• 2S² (2 Sides/2 Sounds) design provides the ability to choose between Down-Firing mounting to increase the low-frequency extension and Up-Firing install to obtain more punch and definition.
• Leveling feet with velcro inserts included for a secure grip with the carpet while maintaining easy removal.
• SSP (Sub Smart Plug) features both traditional push contacts and a Plug-&-Play terminal block to easily configure the impedance as required and provides a quick release.
• Rounded corners allow easy positioning in the trunk and act as reinforcement to reduce enclosure resonance.
• Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (11 mm, one-way).
• Massive driver motor assembly, optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions.
• Water-repellent pressed paper 10 in. cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.
• Specifically developed to be combined with either the AP8.9 bit (2 CH + 2 CH bridged), AP5.9 bit (Sub CH) or AP4.9 bit/AP4 D (2 CH bridged) amplifiers taking advantage of the bass boost feature and integrated parametric equalizer of the built-in DSP.
1x Audison Forza AF M1D D Class Mono Amplifier - 1 x 600W at 4Ω (AF-M1D)
AF M1D boasts one high-fidelity amplified channel 600W @4Ω*, 1000W @2Ω*, and 1200W @1Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package!
*Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven.
Technical Specification
POWER SUPPLY
Nominal power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 35 A
Pulse operating voltage: 6.5 ÷ 17.5 VDC
Idling current: 1.3 A
Standby current draw: 0.005 mA
Consumption @ 14.4 VDC, Minimum load impedance (Max Musical Power): 65 A
Remote IN: 4 ÷15 VDC (1 mA)
Remote OUT: 6.5 ÷15 VDC (150 mA)
ART – Automatic Remote Turn on/off from Speaker-In: 1.5 VDC
Efficiency @ rated power (RMS) @14.4 VDC, 1% THD,4Ω, All Channels: 81%
AMPLIFIER STAGE
Distortion – THD+N @ 1 KHz, 4Ω, 70% Rated Power: 0.1%
Damping factor @ 1 kHz , 4Ω, 2 VRMS: 140
Bandwidth @ -3 dB: 10 Hz ÷ 500 Hz
S/N ratio (A weighted @ 1 V Input, Rated Power) Master Input: 105 dBA
Minimum load impedance: 1 Ω
Output Continuous Power (RMS) @14.4 VDC, 1% THD: 1Ch @ 4Ω: 600 W, 1Ch @ 2Ω: 1000 W, 1Ch @ 1Ω: 1200 W
CEA SPECIFICATIONS
Output power @ 4Ω, 1% THD+N, 14.4 V: 600 W
SN ratio (ref. 1 W output): 80,5 dBA
INPUTS / OUTPUTS / FILTERS
Inputs: Pre-In / Speaker-In
Input sensitivity Pre-In: 0.6 ÷ 6 VRMS
Input sensitivity Speaker-In: 2.2 ÷ 22 VRMS
SUB remote Volume Control (optional): ±12 dB
GENERAL REQUIREMENTS
Ambient operating temperature range: 0 °C to 55 °C (32 °F to 131 °F)
SIZE / WEIGHT
Max size W x H x D (mm/inch): 240 x 47 x 156 / 9.44 x 1.85 x 6.14
Weight (kg/lb): 2.04 / 4.49
1x Kicker 46CK8 K-Series Complete 8-AWG Amplifier Connection Kit W/ 2-Channel RCA Interconnects (46CK8)
KICKER® complete amp kits feature top-quality Hyper-Flex power, ground and turn-on cables. K Series speaker wire and interconnects are also included, as is a heavy-duty AFS fuse holder and fusing. Insulated crimp connectors and zip ties come in the kit as well.
8AWG 2-Channel Amp Kit
This Complete Eight Gauge Amp Kit comes complete with Full Spec wire, hardware, fusing and signal cable.
Hooking up an amp is easy when get everything you need in one place. The best hardware, signal and power cable comes in one convenient package.
1x Kicker 47KEYLOC Key Series Smart Powered Line-Out Converter (47KEYLOC)
Kicker 47KEYLOC Key Series Smart Powered Line-Out Converter
This revolutionary line output converter automatically detects the frequency range of your speaker leads, and a whole lot more!
FIND THE FREQUENCY - News flash: factory audio systems don’t always deliver a full-range signal on every speaker wire. That makes it tough to hook up an aftermarket amp and get the sound you wanted – until now.
Attach the speaker wire to the KEYLOC, play a free test tone (below) and read the LEDs. You’ll instantly know if Hi, Mid or Lo is coming from a particular pair of speaker wires. No oscilloscope or RTA needed!
IT’S FIT - Using KICKER’s FIT 2+™ technology, the KEYLOC has the most versatile input sensitivity in the car-audio aftermarket. Ranging from 125 mV – 10V (Lo) or 1V to 40V (Hi), the KEYLOC is prepared to work with nearly every vehicle on the road today.
OPTIONAL ALL-PASS - The KEYLOC allows you to keep or defeat factory time delay, or the all-pass filter built into many modern vehicles. By defeating this filter, the KEYLOC instantly counteracts the either of these factory effects, allowing you to tune for one-seat audio or maintain the factory imaging.