Description
Included in this kit
This bundle includes an Audison APBX 8R Prima Series 8" 4Ω SVC Ported Subwoofer Enclosure System, an Audison AF-C4D Class D 4 Channel 90W X 4 @ 4 Ohms Amplifier, a Kicker 46CK8 K-Series Complete 8-AWG Amplifier Connection Kit W/ 2-Channel RCA Interconnects, and a Kicker 47KEYLOC Key Series Smart Powered Line-Out Converter.
1x Audison APBX 8R Prima Series 8" 4Ω SVC Ported Subwoofer Enclosure System (APBX-8R)
APBX 8 R - REFLEX SUB BOX 200mm 4Ohm
The APBX 8 R loaded enclosure was developed with reflex loading, with tuning designed to concentrate SPL in the lowest frequency range. The aim was to exploit the natural boost in output found in most cars below 60 Hz known as “cabin gain”. The 8-inch single 4 Ω voice-coil subwoofer has a powerful motor that maximizes efficiency in combination with the AP8.9 bit amplifier. The low-resonant frequency of the subwoofer, matched to the reflex enclosure keeps excursion low within the entire audio spectrum, allowing also the use with a pair of AP4.9 bit / AP4 D bridged channels, capable of delivering 260 W rms.
Features -
• Ultra-low profile (5.16 in. / 131 mm) box with slot-ported design perfectly tuned to fully exploit the APS 8 R driver.
• 2S² (2 Sides/2 Sounds) design provides the ability to choose between Down-Firing mounting to increase the low-frequency extension and Up-Firing install to obtain more punch and definition.
• Levelling feet with velcro inserts included for a secure grip with the carpet while maintaining easy removal.
• SSP (Sub Smart Plug) features both traditional push contacts and a Plug-&-Play terminal block to easily configure the impedance as required and provides a quick release.
• Rounded corners allow easy positioning in the trunk and act as reinforcement to reduce enclosure resonance.
• Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (9 mm, one-way).
• Massive driver motor assembly, optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions.
• Water-repellent pressed paper 8 in. cone, featuring a profile developed with FEM and optimized with the Klippel Scan Vibrometer.
• Specifically developed to be combined with either the AP8.9 bit (2 CH bridged) or AP4.9 bit /AP4 D (2 CH bridged) amplifiers taking advantage of the bass boost feature and integrated parametric equalizer of the built-in DSP.
1x Audison AF-C4D Class D 4 Channel 90W X 4 @ 4 Ohms Amplifier (AF-C4D)
AF companion amplifiers are designed to add powerful amplifier channels to AF bit processor amplifiers. A plug-and-play signal input harness is included to make connection to AF bit amplifiers straightforward. AF companion amplifiers are also perfect for use with systems controlled and managed by a standalone bit processor, such as a bit One HD Virtuoso. AF companions have a “straight wire” architecture, without analog preamp functions such as crossover filtering, and are intended for use with external processors. AF M4D boasts four high-fidelity amplified channels 90W x 4 @4Ω*, 150W x 4 @2Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package!
SPECIFICATIONS:
AMPLIFIER TECH DATA
Channels: 4
Class: D-Class
Efficiency: 84%
Hi Level Input: Yes
Low Level Input: Yes
Digital Input: No
Power supply voltage / fuse: 11 ÷ 15 VDC
Operating power supply voltage: 6.5 ÷ 17.5 VDC
Idling current: 0.004 A
Idling current when off: 0.6 mA
Consumption @ 14.4 VDC, 2Ω, Max Musical Power: 25 A
Remote OUT: 6.5 ÷15 VDC (150 mA)
Remote IN: 4 ÷15 VDC (1 mA)
ART - Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable): 1.5 VDC
AMPLIFIER STAGE
Distortion - THD @ 100 Hz, 4Ω, 70% Rated Power: 0,03%
Bandwidth A: (-3 dB, 2 VRMS, 4 Ω): 10Hz ÷ 40kHz
S/N ratio A: (A weighted @ 1 V): 102 dBA
Damping factor A: (1 kHz, 4Ω, 2 VRMS): 95
Input sensitivity Pre-In: 0.6 ÷ 6 VRMS
Input sensitivity Speaker-In: 2.2 ÷ 22 VRMS
Total Power RMS: 600 W
Minimum load impedance: 2Ω:
Output Power (RMS): @14.4 VDC, 1% THD, 4Ch @ 4Ω: 90 W x 4, 4Ch @ 2Ω: 150 W x 4, 2Ch (bridge) @ 4Ω: 300 W x 2
Adjustable Crossover: No
CEA SPECIFICATIONS
Output power @ 4Ω, 1% THD+N, 14.4 V: 90 W x 4
SN ratio (ref. 1W output): 81 dBA
INPUTS
Input Type: Pre-In / Speaker-In
Remote Sub Volume: ±12 dB
OTHER
Fuse: 1 x 30 A
1x Kicker 46CK8 K-Series Complete 8-AWG Amplifier Connection Kit W/ 2-Channel RCA Interconnects (46CK8)
KICKER® complete amp kits feature top-quality Hyper-Flex power, ground and turn-on cables. K Series speaker wire and interconnects are also included, as is a heavy-duty AFS fuse holder and fusing. Insulated crimp connectors and zip ties come in the kit as well.
8AWG 2-Channel Amp Kit
This Complete Eight Gauge Amp Kit comes complete with Full Spec wire, hardware, fusing and signal cable.
Hooking up an amp is easy when get everything you need in one place. The best hardware, signal and power cable comes in one convenient package.
1x Kicker 47KEYLOC Key Series Smart Powered Line-Out Converter (47KEYLOC)
Kicker 47KEYLOC Key Series Smart Powered Line-Out Converter
This revolutionary line output converter automatically detects the frequency range of your speaker leads, and a whole lot more!
FIND THE FREQUENCY - News flash: factory audio systems don’t always deliver a full-range signal on every speaker wire. That makes it tough to hook up an aftermarket amp and get the sound you wanted – until now.
Attach the speaker wire to the KEYLOC, play a free test tone (below) and read the LEDs. You’ll instantly know if Hi, Mid or Lo is coming from a particular pair of speaker wires. No oscilloscope or RTA needed!
IT’S FIT - Using KICKER’s FIT 2+™ technology, the KEYLOC has the most versatile input sensitivity in the car-audio aftermarket. Ranging from 125 mV – 10V (Lo) or 1V to 40V (Hi), the KEYLOC is prepared to work with nearly every vehicle on the road today.
OPTIONAL ALL-PASS - The KEYLOC allows you to keep or defeat factory time delay, or the all-pass filter built into many modern vehicles. By defeating this filter, the KEYLOC instantly counteracts the either of these factory effects, allowing you to tune for one-seat audio or maintain the factory imaging.