Jensen BUCAM200J Rear View Camera

Backup Camera: This rear-view camera can be installed on a variety of vehicles with an in-dash aftermarket video monitor. Your aftermarket in-dash monitor must feature a composite video camera input. The camera allows you to view what's behind your vehicle on your in-dash monitor's screen when you put your vehicle in reverse.

CMOS Image Sensor: The rear-view camera employs a CMOS image sensor with a resolution of 640 x 480 (effective pixels). The image sensor also incorporates auto white balance.

Wide View Lens: The rear-view camera features a 170-degree wide view lens to help you see better behind your vehicle.

Low Light Visibility: The rear-view camera provides low-light visibility down to 0.5 lux.

Parking Guidelines: The rear-view camera provides parking guidelines on the screen of your vehicle's in-dash monitor to help you back into a parking space. You can remove the parking guidelines by cutting the blue wire loop of the camera's attached power/video cable.

Composite Video: The rear-view camera comes with a 19.75' composite video cable to run from the camera to the composite video camera input of your vehicle's in-dash monitor.

Weather Resistant Housing: The rear-view camera utilizes a weather resistant zinc alloy housing with a IP67 rating.

waterproof CMOS color rear-view camera
19-3/4' video cable
universal fit
170-degree wide angle
parking guidelines
minimum illumination: 0.5 Lux
resolution: 640 x 480
Rear-view camera w/ bracket (attached 38" power/signal cable)
7' Power/ground cable
19.75' Composite video cable
2 Screws
Self-adhesive tape
Installation Manual