Description
Included in this kit
This bundle includes a DS18 BRO-BASS Tailgate Subwoofer Enclosure | 12" Loaded | IXS12.4D Included (Speaker Included), a DS18 FX1 1-Channel | Monoblock | 1 x 900 Watts RMS @ 1Ω | Remote Level Control, and an ATG Audio Transcend Series 100% Copper 4 Gauge Amplifier Kit with Mini ANL Fuseholder - ATG4CXMANL.
1x DS18 BRO-BASS Tailgate Subwoofer Enclosure | 12" Loaded | IXS12.4D Included (Speaker Included) (BRO-BASS)
DS18 • BRO-BASS
DS18 BRO-BASS Tailgate Subwoofer Enclosure | 12" Loaded | IXS12.4D Included (Speaker Included)
DS18 BRO-BASS Ford Bronco 6th Gen Tailgate 12" Subwoofer Enclosure with IXS12.4D
Speaker Size: 12" / 304mm
Total Impedance: 2 Ohms
Total RMS Power Handling: 800W
Frequency Response: 30Hz-200Hz
Sensitivity (1w/1m): 90dB
Water Resistant Materials for Light Rain: Yes (IP11)
Overview
Product Overview
DS18 BRO-BASS Ford Bronco 6th Gen Tailgate 12" Subwoofer Enclosure with IXS12.4D
The BRO-BASS comes with DS18’s IXS12.4D: a shallow subwoofer made for ported boxes and guaranteed to output heavy bass every session! The BRO-BASS was designed to maximize bass response and output without requiring a lot of rear cargo space – the IXS12.4D’s minimized mounting depth (4.33”) makes it the perfect speaker for this enclosure.
Highlights
Key Product Features
- Loaded Tailgate Subwoofer Enclosure
- 6th Gen Bronco
- 1 X 12" IXS12.4D(800 Watts RMS)
- LED RGB Lights
- Water Resistant Housing IPX1
SPECS
| SKU | BRO-BASS |
| Speaker Size | 12" / 304mm |
| Total Impedance | 2 Ohms |
| Total RMS Power Handling | 800W |
| Total MAX Power Handling | 1600W |
| Sensitivity (1w/1m) | 90dB |
| Frequency Response | 30Hz-200Hz |
| Recommended Lo Pass Crossover | 80Hz |
FEATURES
| Ported Box for High Output | Yes |
| Water Resistant Materials for Light Rain | Yes (IP11) |
| Exclusive Ford Bronco Design | Yes |
| Injected Molded ABS Grill with Built-in RGB LED lighting | Yes |
| Input Wires for RGB LED and Subwoofer | Yes, 5ft / 1.5m (6 Cores) |
| Subwoofer Included | Yes, 12" (IXS12.4D) |
| Installation Hardware Included | Yes, 3 x 6M screws / 3 x 6M rivet nut |
| Easy to Install | Yes, fits on the tailgate and secures using the factory bolt location |
SPEAKER SPECIFICATIONS
| Voice Coil Diameter | 2.5" / 63.5mm |
| Voice Coil Former Material | Aluminum |
| Winding Material | Copper |
| Cone Material | Paper |
| Dust Cap Material | Fiberglass |
| Surround Material | Stitched rubber |
| Basket Material | Aluminum |
| Magnet Material | Ferrite |
| Magnet Weight | 62 Oz |
BOX SPECIFICATIONS
| Internal Volume | 34L / 1.2ft3 |
| Port Tune Fb | 45Hz |
| Load Configuration | Parallel |
| Box Type | Front Loaded Ported |
| Box Material | Polyethylene (PE) |
| Finish Material | Black |
| -3Db Dropping Point F3 | 36Hz |
MEASUREMENT
| Overall Height | 17.81" / 452.3mm |
| Overall Width | 27.4" / 695.6mm |
| Overall Depth | 7.4" / 188mm |
1x DS18 FX1 1-Channel | Monoblock | 1 x 900 Watts RMS @ 1Ω | Remote Level Control (FX1)
DS18 • FX1
DS18 FX1 1-Channel | Monoblock | 1 x 900 Watts RMS @ 1Ω | Remote Level Control
DS18 FX1 Flush Mount 1 Channel Watts Amplifier With Acrylic Cover for Custom Installation
Minimum Impedance: 1 Ohm
RMS Power @ 4 ohm: 1 X 400W
Total Watts (Peak): 2700W
Frequency Response: 15-250Hz
Amplifier Class: Digital (D)
Waterproof Rating: IP65 (Flush Mounting)
Overview
Product Overview
DS18 FX1 Flush Mount 1 Channel Watts Amplifier With Acrylic Cover for Custom Installation
DS18’s FX1 packs a punch with high-quality sound output while maintaining a small footprint, making it perfect for those who value both power and space efficiency!
Highlights
Key Product Features
- 1 Channel Subwoofer Monoblock
- Flush Mount / Surface Mount
- 1 X 900 Watts RMS @ 1 Ohm
- CLASS D
- Digital Dream LED Lights / Water Resistant IPX5
SPECS
| SKU | FX1 |
| Total Watts (Peak) | 2700W |
| RMS Power @ 4 ohm | 1 X 400W |
| RMS Power @ 2 ohm | 1 X 650W |
| RMS Power @ 1 ohm | 1 X 900W |
| RMS Power @ 4 ohm Bridge | N/A |
AUDIO
| Frequency Response | 15-250Hz |
| Signal to Noise Ratio | 92dB |
| Efficiency @ 4ohm | 82% |
| Damping Factor | 75 |
| Input Impedance | 30Kohms |
| Channel Separation | N/A |
| Total Harmonic Distortion (THD) | 0.08% |
| Low Level Input Range | 0.2-10V |
| High Level Input | N/A |
| Selectable X-Over | Fixed LPF |
| X-Over Filter Range | 50-250Hz |
| Bass Boost Range | 0~12dB |
| Bass Boost Frequency | 50Hz |
| Infrasonic Filter | 10-50Hz |
| Phase Selector | 0/180 |
FEATURES
| Amplifier Class | Digital (D) |
| Amplifier Type | Monoblock / Subwoofer |
| Number of Channels | 1 |
| Minimum Impedance | 1 Ohm |
| Led Indicator | Power / Protect / Clip |
| Power Input Terminal Size | 4 Ga |
| Fuse Size | 80A (2x40A) |
| Remote Level Control | Yes |
| Cooling Fan | No |
| Voltmeter | No |
| Thermal Protection | Yes |
| Over-Load Protection | Yes |
| DC Output Protection | Yes |
| Short Circuit Output Protection | Yes |
| Voltage Input Protection | Yes (8.8-15.9V) |
| Clipping Protection | Yes |
| Body Color / Finish | Black Aluminum |
EXTRA FEATURES
| Input Channel Selectable | No |
| Remote Level Control with Clip Indicator and Metal Case | Yes (Included) |
| RCA Low Level Output | Yes |
| Tiffany RCA Connector | Yes |
| Very High Efficiency Digital Circuit Design | Yes |
| PCB with Anti-Corrosion Protection Coating | Yes |
| Surface Mount Component Technology | Yes |
| Quality Control Verification using Audio Precision Instruments | Yes |
| Surface Mounting with Digital Chasing LED Adapter | Yes (Included) |
| Waterproof Rating | IP65 (Flush Mounting) |
MEASUREMENT
| Body Length | 9" / 228mm |
| Body Width | 4.7" / 120mm |
| Overall Height | 1.85" / 47mm |
| Heatsink Length | 10.8" / 275mm |
| Heatsink Width | 7.2" / 182mm |
| Mounting Hole | 9.2"x5.8" / 233.7x147mm |
| Mounting Depth | 1.5" / 39mm |
| Gross Single Unit Weight | 2.8Kg |
1x ATG Audio Transcend Series 100% Copper 4 Gauge Amplifier Kit with Mini ANL Fuseholder - ATG4CXMANL (ATG4CXMANL)
Elevate your car audio to the next level with our Premium 1500W 4 Gauge Amp Kit. Engineered for power and performance, this kit is your key to unlocking the full potential of your car's sound system. With a robust 4-gauge power cable, you can trust that your amplifier will receive the necessary power to deliver crisp, clear sound even at high volumes. Say goodbye to distortion and hello to premium audio quality.
Features -
• 4 Gauge 100% Copper Mini ANL Amp Kit
• 15' (4.6M) Blue 100% Copper Soft Touch RCA Cable
• 15' (4.6M) 4 Ga. Blue 100% Copper Soft Touch Power Cable
• 15' (4.6M) 18 Ga. Blue 100% Copper Remote Wire
• 17' (5.2M) 16 Ga. Speaker Cable
• 2' (0.6M) 4 Ga. Black 100% Copper Soft Touch Ground Cable
• Mini ANL Heat Resistant Fuse Holder
• Mini ANL Fuse
• Split Loom
• Accessories: Wire Ties, Ring
• Terminals, Butt connectors,
• Spades, Grommet
• Master Carton: 8
• Packed: Blister Shell