Description
Included in this kit
This bundle includes a DS18 UTV-KIT4-4DR 4-GA | Water Resistant Fuse Holder | 12 Ft of Power and Ground Wires | 4 Door UTV, 4x DS18 PRO-HY6.4MSL 6.5" | 150 Watts RMS | 4Ω | Mid-Range | Shallow | Grill Included, and an ATG Audio 1000 W Peak / 4×125 W RMS Class‑D 4‑Channel Marine Amplifier – Bridgeable, 2 Ω Stereo‑Capable, Marine-Grade Coated PCB - ATG4.
1x DS18 UTV-KIT4-4DR 4-GA | Water Resistant Fuse Holder | 12 Ft of Power and Ground Wires | 4 Door UTV (UTV-KIT4-4DR)
4-GA Amplification Kit for 4-Door UTV The UTV-KIT4-2DR is a plug & play 4-gauge amplification kit designed to make installing your DS18 NXL-X amplifier in your 4-door UTV easy! • Pre-loomed 4-GA OFC wiring • Plug & play terminals • Waterproof MFH4 fuse holder • Optimized for DS18 NXL-X amps • Designed specifically for 4-door UTV setups
4x DS18 PRO-HY6.4MSL 6.5" | 150 Watts RMS | 4Ω | Mid-Range | Shallow | Grill Included (PRO-HY6.4MSL)
DS18 • PRO-HY6.4MSL
DS18 PRO-HY6.4MSL 6.5" | 150 Watts RMS | 4Ω | Mid-Range | Shallow | Grill Included
DS18 PRO-HY6.4MSL 6.5” Hybrid Slim Loudspeaker With 1” Compression Driver Horn
Nominal Diameter: 6.5" / 165.1mm
Nominal Impedance: 4 Ohm
RMS Power Handling: 150W
Frequency Response: 100Hz-20Khz
Sensitivity (1w/1m): 93dB
Pair or Single: Single
Overview
Product Overview
The PRO-HY6.4MSL brings full-range power to tight installs. We’ve given you the best of both worlds: a high-output midrange AND compression driver, packed into a water-resistant, off-road–ready design that fits where others can’t.
HYBRID DESIGN FOR FULL-RANGE SOUND This speaker pairs a treated cloth surround + water-resistant paper cone midrange with a titanium compression driver for powerful highs and rich mid clarity. Rated at 150W RMS with a 100Hz–20kHz response range, you get high SPL output across a wide bandwidth.
Highlights
Key Product Features
- 6.5" Slim Hybrid Loudspeaker
- 150W RMS / 300W MAX
- 1" Titanium Compression Driver
- IP65 Rated + Grille w/ Water/Sun Protection Cloth
- Neodymium Driver Magnet / Ferrite Woofer Magnet
SPECS
| SKU | PRO-HY6.4MSL |
| Nominal Diameter | 6.5" / 165.1mm |
| Nominal Impedance | 4 Ohm |
| RMS Power Handling | 150W |
| MAX Power Handling | 300W |
| Sensitivity (1w/1m) | 93dB |
| Frequency Response | 100Hz-20Khz |
| Recommended HI Pass Crossover | 140Hz |
| Number of ways | 2 ways |
| Pair or Single | Single |
| Grill Included | Yes |
WOOFER SPECIFICATIONS
| Voice Coil Diameter | 1.5" / 38.6mm |
| Voice Coil Former Material | KSV |
| Winding Material | CCAW |
| Cone Material | Water-Resistant Paper |
| Surround Material | Treated Cloth |
| Basket Material | Steel |
| Basket Color/Finish | Black |
| Magnet Material | Ferrite |
| Magnet Weight | 19.5 Oz |
THIELE & SMALL PARAMETERS
| Equivalent Volume Vas | 9.42L / 0.3327ft3 |
| Excursion (one way) Xmax | 1.5mm |
| Free Air Resonance Fs | 160Hz |
| Mechanical Factor Qms | 6.605 |
| Electrical Factor Qes | 1.296 |
| Total Factor Qts | 1.086 |
| Mechanical Mass Mms | 2.734g |
| Mechanical Compliance Cms | 0.358mm/N |
| BL Factor BL | 2.668 |
| Voice Coil Inductance Le | 0.05892mH |
| Cone Area Sd | 136.848 Cm2 |
| DC Resistance Re | 3.2 ohm |
| Mechanical Mass w/o air Mmd | 23.2g |
DRIVER SPECIFICATIONS
| Voice Coil Diameter | 1" / 25.4mm |
| Voice Coil Former Material | Kapton |
| Winding Material | CCAW |
| Diaphragm Material | Titanium |
| Magnet Material | Neodymium |
| Horn Diameter | 3.15" / 80 mm |
SPEAKER MEASUREMENT
| Overall Diameter | 6.92" / 176mm |
| Overall Depth | 3.52" / 89.5mm |
| Front Mount Baffle Cutout | 5.6" / 142mm |
| Mounting Depth | 2.82" / 72mm |
| Motor Diameter | 4.33" / 110mm |
SHIPPING INFO
| Gross Single Unit Weight | 3.75 |
| Single Unit Box Dimensions L x W x H (Inches) | 7.25 x 7.25 x 4.25 |
| Quantity of Units in Master Carton | 8 |
| Gross Master Carton Weight | 32 |
| Master Carton Dimensions L x W x H (Inches) | 15.25 x 15.25 x 9.5 |
1x ATG Audio 1000 W Peak / 4×125 W RMS Class‑D 4‑Channel Marine Amplifier – Bridgeable, 2 Ω Stereo‑Capable, Marine-Grade Coated PCB - ATG4 (ATG4)
This powerful amplifier delivers clear, crisp sound even in the harshest marine environments. With its powerful 1000W peak power and 2Ω mono load capability, this amplifier can easily drive even the most demanding speakers. The Class D circuitry ensures that the amplifier delivers clean, accurate sound, while the marine grade components help to keep the amplifier cool even under heavy loads. The 1000W Class D 4 Channel Full Range Mini Amplifier also features a variety of features that make it easy to use and customize, including a variable low pass crossover, bass boost, and sub-sonic filter.
Features -
• Powerful sound
• Reliable construction
• User-friendly features
Specifications -
• 4 Channel Full Range Class D Technology
• 2-Ohms Stereo load Capability
• Marine grade conformal coating on PCB
• Audiophile Grade RCA connectors
• Variable 12db High/Low-pass crossover filters
• Bridgeable outputs @ 4-Ohms load
• Double Sided Circuit tablet
• Compatible with any 4/2-Ohms Loudspeaker
• Output Power @ 14.4 VDC, 4-Ohms 4 x 125W
• Output Power @ 14.4 VDC, 2-Ohms 4 x 250W
• Output Power @ 14.4 VDC, Bridge 2 x 500W
• Power Supply Input Voltage 12.0VDC to14.8VDC
• TTHD (1kHz @ 4-Ohms): 0.04%
• Bandwidth (-3 dB): 18Hz - 22KHz
• Damping Factor (1k Hz @ 4-Ohms): 100
• S/N ratio ( as weighted @ 1 Volt): 99db
• Input Sensitivity: .20V - 5.0V RMS
• Minimum Load Impedance: 2-Ohms
• Input Pre in RCA
• Channel 1-2 filter range: 55Hz - 750Hz
• Channel 3-4 filter range: 55Hz - 750Hz
• Variable Bass Boost: 45Hz @ 0 ~ 12dB