Description
Included in this kit
This bundle includes 2x DS18 PRO-ZT6 6.5" | 225 Watts RMS | 4Ω | Mid-Range | Water Resistant Cone, and a Stinger RKFR6 Roadkill Fast Rings 6" & 6.5".
2x DS18 PRO-ZT6 6.5" | 225 Watts RMS | 4Ω | Mid-Range | Water Resistant Cone (PRO-ZT6)
DS18 • PRO-ZT6
DS18 PRO-ZT6 6.5" | 225 Watts RMS | 4Ω | Mid-Range | Water Resistant Cone
DS18 PRO-ZT6
Nominal Diameter: 6.5" (165.1 mm)
Nominal Impedance: 4 ohms
RMS Power Handing: 225 Watts
Maximum Power Handing: 450 Watts
Frequency Response: 85Hz-20kHz
Sensitivity (1w/1m): 97dB
Overview
Product Overview
6.5” Water Resistant Mid-Range Loudspeaker with Built-in Bullet Tweeter and Grill
Experience earth-shaking sound with the PRO-ZT6: a 2-way mid-range built for raw power, and full-range functionality. Packed into a rugged, water-resistant coaxial build.
Highlights
Key Product Features
- 6.5" Coaxial Water Resistant Mid-Range
- RMS Power: 225 Watts (450 Watts Peak)
- Impedance: 4-Ohm
- Ferrite & Neodymium Magnets
- Grill with Cloth Shade
SPECS
| SKU | PRO-ZT6 |
| Nominal Diameter | 6.5" (165.1 mm) |
| Nominal Impedance | 4 ohms |
| RMS Power Handing | 225 Watts |
| Maximum Power Handing | 450 Watts |
| Sensitivity (1w/1m) | 97dB |
| Frequency Response | 85Hz-20kHz |
| Recommended Hi Pass Crossover | 100 Hz |
| Sold as | Single Unit |
MOTOR
| Voice Coil Diameter | 1.5” (38.1 mm) |
| Voice Coil Former Material | Kapton |
| Winding Material | CCAW |
| Basket Material | Steel |
| Magnet Weight | 27 oz |
| Magnet Material | Ferrite |
| Cone Material | Water-Resistant Paper |
| Surround Material | Treated Cloth |
TWEETER
| Voice Coil Diameter | 1” |
| Voice Coil Material | KAPTON |
| Winding Material | CCAW |
| Diaphragm Material | Aluminum Alloy |
| Magnet Material | Neodymium (N35H) |
MEASUREMENTS
| Overall Diameter | 178 mm (7”) |
| Front Mount Baffle Cutout | 144 mm (5.67”) |
| Mounting Depth | 77 mm (3.03”) |
| Overall Depth | 97mm (3.81”) |
THIELE & SMALL PARAMETERS
| Vas | 4.72L / 0.16ft3 |
| Xmax | 1.65mm |
| Fs | 120Hz |
| Qms | 5.259 |
| Qes | 0.614 |
| Qts | 0.55 |
| Re | 3.2 Ohms |
1x Stinger RKFR6 Roadkill Fast Rings 6" & 6.5" (RKFR6)
Our 3-piece foam ring speaker enhancement system solves the problem of acoustically coupling aftermarket speakers to factory speaker openings. The RoadKill Fast Rings kit increases speaker output, improves the projection of the audio into the car cabin and reduces unwanted rear reflections that can degrade the sound.
3-piece Foam Ring System fits 6" & 6.5" Speakers
Features:
Reduce panel vibration
Increase mid-bass response
Enhanced audio output efficiency
Minimize destructive wave interference
Help prevent front and rear wave cancellation
Easy installation with peel & stick application
Maximize performance for speaker installations
Sold in pairs
3 Ring DNA
Gasket for speaker mounting to the baffle plate surface
Middle ring to mount around the outer edge of the speaker
Circular foam pad goes behind the speaker to absorb unwanted reflections on hard surfaces, such as inside a car door