Description
This pre-built system includes the following Cicada Audio products: DSP600.4D 600w 4 ch Amplifier, CH65.2 6.5" Coax Horn - 2 ohm, CHDRGG H-D 2014 + Road Glide Kidney Grill - Matched Pair, CHDSGG H-D® 2014 + Street Glide® Replacement Round Grills - Pair, HDPG8K 8 Gauge Power/ground Harness Kit For HD, HDFiMY HD Plug To Molex - Front "Y" Bridging Adaptor Harness - Pair, HDFRBoM-1.5 H-D® Output Bagger Molex® Left And Right Speaker Bridged Out - 1.5' Harness.
DSP600.4D 600w 4 ch Amplifier
DSP CONTROLLED 4 CHANNEL POWER AMPLIFIER
4 X 70 WRMS into 4 ohms @ 12.5 Vdc
4 X 92 WRMS into 4 ohms @ 14.4 Vdc
4 X 115 WRMS into 2 ohms @ 12.5 Vdc
4 X 152 WRMS into 2 ohms @ 14.4 Vdc
CH65.2 – 6.5 Inch 2 Ohm High-Performance Coaxial Horn Speaker – PAIR
250wRMS/500w MAX Power Handling
Neodymium High Energy/ Light Weight N35 Magnet structure
Heavy Duty / Die-cast Aluminum Basket
2.0” 4 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil Mid-Bass
Shortening Ring for the Ultimate in speaker control
1.4” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 75Hz -20Khz+/-5dB
High Sensitivity:4dB / 99dB 1W/1M Average (1W/1M – 2.83V)
12dB Crossover with custom tooled/ Vented crossover case
Can be Bi-Amped (Horn Tweeters can be run on their own dedicated channels)
Mounting Depth: 3.0” / 76.2mm
Mounting Diameter: 5.7” / 145.5mm
Custom tooled replacement grilles compatible wiht Road and Street Glide motorcycles
Additional wiring for installation included:
HDPG8K 8 Gauge Power/ground Harness Kit For HD
HDFiMY HD Plug To Molex - Front "Y" Bridging Adaptor Harness - Pair
HDFRBoM-1.5 H-D® Output Bagger Molex® Left And Right Speaker Bridged Out - 1.5' Harness
DSP600.4D 600w 4 ch Amplifier
DSP CONTROLLED 4 CHANNEL POWER AMPLIFIER
4 X 70 WRMS into 4 ohms @ 12.5 Vdc
4 X 92 WRMS into 4 ohms @ 14.4 Vdc
4 X 115 WRMS into 2 ohms @ 12.5 Vdc
4 X 152 WRMS into 2 ohms @ 14.4 Vdc
CH65.2 – 6.5 Inch 2 Ohm High-Performance Coaxial Horn Speaker – PAIR
250wRMS/500w MAX Power Handling
Neodymium High Energy/ Light Weight N35 Magnet structure
Heavy Duty / Die-cast Aluminum Basket
2.0” 4 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil Mid-Bass
Shortening Ring for the Ultimate in speaker control
1.4” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 75Hz -20Khz+/-5dB
High Sensitivity:4dB / 99dB 1W/1M Average (1W/1M – 2.83V)
12dB Crossover with custom tooled/ Vented crossover case
Can be Bi-Amped (Horn Tweeters can be run on their own dedicated channels)
Mounting Depth: 3.0” / 76.2mm
Mounting Diameter: 5.7” / 145.5mm
Custom tooled replacement grilles compatible wiht Road and Street Glide motorcycles
Additional wiring for installation included:
HDPG8K 8 Gauge Power/ground Harness Kit For HD
HDFiMY HD Plug To Molex - Front "Y" Bridging Adaptor Harness - Pair
HDFRBoM-1.5 H-D® Output Bagger Molex® Left And Right Speaker Bridged Out - 1.5' Harness