Description
Included in this kit
This bundle includes a Focal 165 SF3 - Slate Fiber 3-way Component kit, and a Focal BAM Acoustic insulation kit.
1x Focal 165 SF3 - Slate Fiber 3-way Component kit (165SF3)
The Slatefiber 165 SF3 offers a wide, immersive, and highly detailed soundstage. Its 165 mm woofer, 65 mm midrange, and Al/Mg tweeter work together to reveal every nuance, from impactful bass to delicate highs, all powered by France made Slatefiber technology for balance, natural tone, and dynamics.
Al/Mg tweeter & adjustable filtering
The aluminium/magnesium inverted dome tweeter brings clarity and finesse. With three level adjustment (-3/0/+3 dB), it adapts perfectly to the cabin. Separable crossovers allow flexible, optimised installation based on the vehicle and system design.
Premium construction & perfect integration
Featuring an aluminium rotor design frame, butyl surround, and a 65 mm midrange engineered for intuitive integration, the 165 SF3 offers easy installation and long term reliability.
SPECIFICATIONS
6.5" Speaker
Nominal power: 80W RMS
Maximum power: 160W
Sensitivity: 91dB
Nom. impedance: 4Ω
Cone: Slatefiber
Surround: Butyl
DC resistance: 2.8Ω
VC diameter: 25mm / 1"
Former: Kapton
Layers: 2
Wire: Copper
Net weight: 980g / 2.16lbs
Frequency response (kit): 55-21kHz
Frequency response (woofer with crossover): 55-450Hz
Frequency response (woofer without crossover): 55-4kHz
PARAMETERS Rdc: 2.75Ω
Fs: 50Hz
Mms: 15g
Cms: 0.5mm/N
Vas: 12l
Qts: 0.55
Qes: 0.7
Qms: 9
Bxl: 4.7N/A
Sd: 132cm2
SPL: 91dB
Xmax: 4mm
2.5" Speaker
Nominal power: 40W RMS
Maximum power: 80W
Sensitivity: 87dB
Nom. impedance: 4Ω
Cone: Slatefiber
Surround: Butyl
DC resistance: 2.8Ω
VC diameter: 25mm / 1"
Former: Kapton
Layers: 2
Wire: Copper
Net weight: 150g / 0.33lbs
Frequency response: 250-11kHz
PARAMETERS
Rdc: 2.8Ω
Fs: 230Hz
Mms: 2.8g
Cms: 0.2mm/N
Vas: 0.12l
Qts: 1
Qes: 1.3
Qms: 4.5
Bxl: 2.9N/A
Sd: 22cm2
SPL: 87dB
Xmax: 2mm
Tweeter
Nominal power: 15W RMS
Maximum power: 100W
Sensitivity: 93dB
Nom. impedance: 4Ω
Frequency response: 3000Hz-21kHz
Cone: Al/Mg
Surround: Poron®
VC diameter: 20mm / 0.8"
Net weight: 50g / 0.11lbs
PARAMETERS
Rdc: 4Ω
Fs: 2.6KHz
1x Focal BAM Acoustic insulation kit (BAM)
Acoustic Insulation Kit
Two 21cm x 31cm Sheets
Key Points
Replaces Plain chant
Attenuates the speaker back wave
Increases the bass level in your car
Increases Soundproofing out outside noise
Advantages
3 technical materials, 3 strategic functions
This acoustic insulation kit is completing and essential to a quality car audio installation.
From its use depends optimum acoustic rendering of speakers, amplifiers and installed accessories. Technical materials made of honeycombed damping material, an Aluminum sheet and a viscoelastic complex (Butyl).
Honeycombed damping material
Just like the acoustic foam inside a loudspeaker, the honeycombed damping material attenuates the speaker back wave and thus increases the speaker performance.
Aluminum sheet
Aluminum provides rigidity to the Butyl/foam couple. This rigidity also permits the easy laying of BAM in difficultlocations.
Viscoelastic complex
Self-adhesive, the Butyl complex absorbs the vibrations of the surface with which it’s in contact. It highly attenuates the outside noise that gets inside the car.