Description
GENPRO10X3 30-Amp 3-Bank On-Board Battery Charger, Maintainer & Battery Desulfator
The NOCO GENPRO10X3 is a fully automatic three-bank onboard battery charger designed to independently charge and maintain three 12-volt batteries. Delivering 10 amps per bank and 30 amps total, it supports lead-acid and lithium-ion batteries with intelligent charging, battery repair, thermal compensation, and IP68-rated waterproof construction for permanent marine installations.
Overview
Independent Charging for Three Batteries
The GENPRO10X3 independently charges and maintains three 12-volt batteries, delivering 10 amps to each battery bank. Selectable charging modes for 12V, AGM, Lithium, and Repair allow each bank to be optimized for the connected battery chemistry.
- 30-amp total charging output.
- Three independent 10-amp battery banks.
- Supports batteries up to 230Ah.
- Maintenance charging for all battery sizes.
High Performance
Compact Smart Charging
High-frequency switch-mode charging technology and an onboard microcomputer precisely control the charging cycle for efficient power conversion and accurate battery charging in a compact onboard design.
- High-frequency switch-mode charging.
- Microcomputer-controlled charging.
- Compact permanent-mount design.
- Designed for demanding marine environments.
Charging Features
Advanced Battery Management
Construction
Built for Harsh Marine Conditions
The fully sealed IP68-rated housing is designed to withstand extreme onboard environments. The integrated anti-vibration backing helps isolate shock and vibration, while the AC and DC cables resist oil, grease, chemicals, UV exposure, water, and abrasion.
- IP68 waterproof construction.
- Integrated anti-vibration backing.
- Flexible mounting in any orientation.
- Marine-grade cable protection.
In The Box
Included Components
- GENPRO10X3 On-Board Battery Charger
- (2) Self-Tapping Screws
- User Guide
- Warranty Information
| Model | GENPRO10X3 |
| Battery Banks | 3 |
| Charging Current | 10 Amps DC x 3 Banks (30 Amps Total) |
| Battery Voltage | 12 Volts |
| Charging Modes | 12V, 12V AGM, 12V Lithium, 12V Repair |
| Battery Chemistry | Lead-Acid and Lithium |
| Supported Battery Types | AGM, CA, EFB, Gel, Lithium, MF, Wet |
| Capacity Range | Up to 230Ah |
| Maintenance Charging | All Battery Sizes |
| Input Voltage | 120-240V AC |
| Frequency | 50-60Hz |
| Power Consumption | 450 Watts Max |
| Operating Temperature | -4°F to 104°F (-20°C to 40°C) |
| Storage Temperature | -22°F to 140°F (-30°C to 60°C) |
| Relative Humidity | 0-95% Non-Condensing |
| Protection Rating | IP68 |
| Height | 8.11 in (206 mm) |
| Width | 10.51 in (267 mm) |
| Depth | 2.83 in (72 mm) |
| Weight | 13.43 lb (6.2 kg) |
| DC Cable Length | 72 in (182 cm) |
| DC Cable Size | 14 AWG |
| DC Fuse | 15 Amp Mini Blade Fuse |
| AC Cable Length | 72 in (182 cm) |
| AC Cable Size | 18 AWG |
| Safety Features | Reverse Polarity, Spark-Proof, Short-Circuit, Open-Circuit, Overheating, Overcharge Protection |
The GENPRO10X3 automatically charges, maintains, monitors, and repairs three independent battery banks while providing continuous maintenance and comprehensive built-in protection for dependable long-term operation.