Description
Included in this kit
This bundle includes a Hertz Mille Pro Series MPX-1653 6.5" Pro Audio Two-Way Coaxial Speakers (Pair), and a Metra 72-4572 Speaker Harness — Buick | Chevy | GMC 1986-2026.
1x Hertz Mille Pro Series MPX-1653 6.5" Pro Audio Two-Way Coaxial Speakers (Pair) (MPX-1653)
The coax tweeter concentric to the woofer of the MPX 165.3 car audio coaxial speakers allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies.
Features -
• Concentric coaxial tweeter built in the woofer voice coil, achieving one single point of emission, to re-create the virtual sound-stage like in live music performances.
• 20 mm voice coil Tetolon fiber soft dome tweeter, featuring “Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.
• Tweeter support working as a rear chamber, sized for low Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.
• 36 mm pure copper woofer voice coil wound on a Polyamide former, for outstanding power handling and dynamic compression-free reproduction.
• Pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically refined to perfectly match with the tweeter emission ensuring phase consistency in the crossover area.
Specifications -
• Power Handling - Peak W: 200
• Power Handling - Continuous W: 100
• Impedance Ω: 4
• Frequency response Hz: 45 ÷ 21,5k
• Sensitivity dB SPL: 92
• Woofer size mm (in.): 165 (6.5)
• Tweeter size mm (in.): 25 (1)
• Woofer Voice Coil Ø mm (in.): 36 (1.42)
• Tweeter voice coil Ø mm (in.): 20 (0.8)
1x Metra 72-4572 Speaker Harness — Buick | Chevy | GMC 1986-2026 (72-4572)
Metra 72-4572 Speaker Harness — Buick | Chevy | GMC 1986-2026
The Metra 72-4572 is a speaker harness. (2) Two speaker harnesses. Applications include 2018-2023 Buick Enclave and 2020-2024 Buick Encore GX. Check the full vehicle list and equipment requirements for your installation.
Features
- Speaker harness for installing aftermarket speakers.
- Carries the audio signal from the vehicle wiring to the connected speaker.
- Includes two speaker harnesses for a paired speaker installation.
- Connects without cutting, splicing or soldering the factory speaker wiring.
- Get installation assistance from Metra technical support seven days a week.
Technical Specifications
| Manufacturer model | 72-4572 |
|---|---|
| Product type | speaker harness |
| Product feature | Speaker harness for installing aftermarket speakers |
| Product feature | Designed to fit multiple Buick, Chevrolet, and GMC models |
| Installation / equipment | Plug-n-play design: No cutting, splicing, or soldering is needed |
| Product feature | Provides an audio signal to the connected speaker |
| Installation support | A tech support number is available for installation help 7 days a week |
| Warranty | 1-year warranty |
| Included components | (2) Two speaker harnesses |
| Installation / equipment | Install aftermarket speakers into your car with this vehicle-specific wiring harness that plugs directly into the factory speaker harness. This plug-n-play design eliminates the need to cut, splice, or solder any wires. |
| Installation / equipment | Please note that additional parts may be required to complete your installation. For fitment information, refer to our vehicle fit guide to find details specific to your vehicle. |
Vehicle Applications
- 2018-2023 Buick Enclave
- 2020-2024 Buick Encore GX
- 2016-2024 Buick Envision
- 2010-2019 Buick LaCrosse
- 2011-2017 Buick Regal
- 2018-2020 Buick Regal Sportback
- 2018-2020 Buick Regal TourX
- 2012-2017 Buick Verano
- 2013-2019 Cadillac ATS
- 2020-2024 Cadillac CT4
- 2020-2024 Cadillac CT5
- 2016-2020 Cadillac CT6
- 2015-2019 Cadillac CTS
- 2014-2016 Cadillac ELR
- 2015-2020 Cadillac Escalade
- 2015-2020 Cadillac Escalade ESV
- 2019-2024 Cadillac XT4
- 2017-2024 Cadillac XT5
- 2020-2024 Cadillac XT6
- 2013-2019 Cadillac XTS
- 2020 Can-Am Maverick X3 Max DS Turbo R
- 2020 Can-Am Maverick X3 Max RS Turbo R
- 2018-2020 Can-Am Maverick X3 Max Turbo
- 2017-2019 Can-Am Maverick X3 Max Turbo R
- 2018-2020 Can-Am Maverick X3 Turbo
- 2017-2019 Can-Am Maverick X3 Turbo R
- 2019-2026 Chevrolet Blazer
- 2024-2025 Chevrolet Blazer EV
- 2017-2023 Chevrolet Bolt EV
- 2010-2024 Chevrolet Camaro
- 2011-2017 Chevrolet Caprice
- 2015-2026 Chevrolet Colorado
- 2014-2026 Chevrolet Corvette
- 2011-2019 Chevrolet Cruze
- 2016 Chevrolet Cruze Limited
- 2018-2026 Chevrolet Equinox
- 2024-2026 Chevrolet Equinox EV
- 2013-2020 Chevrolet Impala
- 2013-2025 Chevrolet Malibu
- 2016 Chevrolet Malibu Limited
- 2014-2025 Chevrolet Silverado 1500
- 2019 Chevrolet Silverado 1500 LD
- 2015-2018 Chevrolet Silverado 2500
- 2015-2025 Chevrolet Silverado 2500 HD
- 2015-2018 Chevrolet Silverado 3500
- 2015-2025 Chevrolet Silverado 3500 HD
- 2012-2020 Chevrolet Sonic
- 2016-2022 Chevrolet Spark
- 2015-2026 Chevrolet Suburban
- 2016-2019 Chevrolet Suburban 3500 HD
- 2015-2026 Chevrolet Tahoe
- 2021-2026 Chevrolet Trailblazer
- 2018-2026 Chevrolet Traverse
- 2015-2026 Chevrolet Trax
- 2011-2019 Chevrolet Volt
- 2017-2024 GMC Acadia
- 2015-2025 GMC Canyon
- 2014-2025 GMC Sierra 1500
- 2015-2025 GMC Sierra 2500 HD
- 2015-2025 GMC Sierra 3500 HD
- 2024 GMC Sierra EV
- 2018-2025 GMC Terrain
- 2015-2025 GMC Yukon
- 2015-2022 GMC Yukon XL
Installation Notes
This plug-n-play design eliminates the need to cut, splice, or solder any wires. Please note that additional parts may be required to complete your installation. Plug-n-play design: No cutting, splicing, or soldering is needed. Install aftermarket speakers into your car with this vehicle-specific wiring harness that plugs directly into the factory speaker harness. This plug-n-play design eliminates the need to cut, splice, or solder any wires. Please note that additional parts may be required to complete your installation. For fitment information, refer to our vehicle fit guide to find details specific to your vehicle.
Product Details and Requirements
- Install aftermarket speakers into your car with this vehicle-specific wiring harness that plugs directly into the factory speaker harness. This plug-n-play design eliminates the need to cut, splice, or solder any wires.
- Please note that additional parts may be required to complete your installation. For fitment information,
- Features:
- Includes:
- Speaker harness for installing aftermarket speakers
- Designed to fit multiple Buick, Chevrolet, and GMC models
- Plug-n-play design: No cutting, splicing, or soldering is needed
- Provides an audio signal to the connected speaker
- 1-year warranty
- (2) Two speaker harnesses